summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2024-01-17Merge pull request #2832 from aapostoliuk/T5865-circinusChristian Breunig
T5865: Moved ipv6 pools to named ipv6 pools in accel-ppp
2024-01-16Merge pull request #2818 from jestabro/serial-console-config-modeDaniil Baturin
image-tools: T5923: update system_console.py for new GRUB file structure
2024-01-16T4658: Renamed DPD action value from 'hold' to 'trap'aapostoliuk
Renamed DPD action value from 'hold' to 'trap'
2024-01-16T5865: Moved ipv6 pools to named ipv6 pools in accel-pppaapostoliuk
Moved ipv6 pools to named ipv6 pools in accel-ppp services
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
2024-01-13Merge pull request #2817 from sarthurdev/kea6-optionsChristian Breunig
dhcpv6: T3316: Extend scope of DHCP options, bugfixes
2024-01-12image-tools: T5923: update system_console.py for new GRUB file structureJohn Estabrook
Add util function to set serial console speed in accordance with revised GRUB file structure; in keeping with the intentions of the config_mode script, adjust the GRUB var 'console_speed' to only modify ttyS0.
2024-01-13dhcpv6: T3316: Add `listen-interface` as supported by Keasarthurdev
2024-01-12T5925: Containers change systemd KillModeViacheslav Hletenko
By default we use mode `none` for containers Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
2024-01-12Merge pull request #2807 from nicolas-fort/T5922Christian Breunig
T5922: firewall: fix intra-zone filtering parsing rules; update firew…
2024-01-12Merge pull request #2806 from jestabro/serial-consoleDaniil Baturin
image-tools: T5910: explicitly set transmission speed of serial console
2024-01-12T5922: firewall: fix intra-zone filtering parsing rules; update firewall ↵Nicolas Fort
smoketest
2024-01-12Revert "syslog: T1487: store all journalctl log files also in syslog"Christian Breunig
This reverts commit 800c85a20a00278ab07bbcccd85b753b1ca31e21.
2024-01-11image-tools: T5910: explicitly set transmission speed of serial consoleJohn Estabrook
GRUB defaults to 9600 in case of serial console; explicitly set to 115200.
2024-01-11syslog: T1487: store all journalctl log files also in syslogChristian Breunig
This is useful to send the journal logs to external syslog servers
2024-01-10Merge pull request #2777 from aapostoliuk/T5688-multirangeChristian Breunig
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp
2024-01-10Merge pull request #2785 from sarthurdev/kea-optionsChristian Breunig
dhcp: T3316: T5787: T5912: Extend scope of DHCP options, bugfixes
2024-01-10dhcp: T3316: Fix `listen-address` handling and add `listen-interface` as ↵sarthurdev
supported by Kea
2024-01-09T5688: Changed 'range' to multi in 'client-ip-pool' for accell-pppaapostoliuk
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp services. Added completionHelp to default-pool and next-pool. Fixed verification in vpn l2tp config script.
2024-01-09https: T5902: remove virtual-host configurationChristian Breunig
We have not seen the adoption of the https virtual-host CLI option. What it did? * Create multiple webservers each listening on a different IP/port (but in the same VRF) * All webservers shared one common document root * All webservers shared the same SSL certificates * All webservers could have had individual allow-client configurations * API could be enabled for a particular virtual-host but was always enabled on the default host This configuration tried to provide a full webserver via the CLI but VyOS is a router and the Webserver is there for an API or to serve files for a local-ui. Changes Remove support for virtual-hosts as it's an incomplete and thus mostly useless "thing". Migrate all allow-client statements to one top-level allow statement.
2024-01-07Merge pull request #2758 from c-po/certbot-T5886Christian Breunig
pki: T5886: add support for ACME protocol (LetsEncrypt)
2024-01-06dns: T5900: fix smoketests for serve-stale-extension and ↵Christian Breunig
exclude-throttle-address This fixes commit 199ceb1f0a ("dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns features") where after the latest review round the Jinja2 template was inconsitently changed and smoketests were not re-run.
2024-01-06dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns ↵fvlaicu
features
2024-01-06https: T5886: migrate https certbot to new "pki certificate" CLI treeChristian Breunig
2023-12-31T5474: establish common file name pattern for XML conf mode commandsChristian Breunig
We will use _ as CLI level divider. The XML definition filename and also the Python helper should match the CLI node. Example: set interfaces ethernet -> interfaces_ethernet.xml.in set interfaces bond -> interfaces_bond.xml.in set service dhcp-server -> service_dhcp-server-xml.in
2023-12-30T5870: ipsec remote access VPN: add x509 ("pubkey") authentication.Lucas Christian
2023-12-28Merge pull request #2658 from aapostoliuk/T5801-circinusChristian Breunig
T5801: Rewritten L2TP to get_config_dict
2023-12-28Merge pull request #2695 from aapostoliuk/T5842-circinusChristian Breunig
T5842: Rewritten PPTP to get_config_dict
2023-12-27T5842: Rewritten PPTP to get_config_dictaapostoliuk
Rewritten PPTP to get_config_dict Fixed 'dynamic-author' commands. These commands did not create anything in accel-ppp config.
2023-12-27Merge pull request #2693 from aapostoliuk/T5859-circinusChristian Breunig
T5859: Fixed format of pool range in the accel-ppp config
2023-12-27T5859: Fixed format of pool range in the accel-ppp configaapostoliuk
Fixed format of ipv4 pool range from 'x.x.x.x-x.x.x.y' to 'x.x.x.x-y'
2023-12-26firewall: T5834: Add support for default log for route policyIndrajit Raychaudhuri
One can now do `set policy route foo default-log` which will add log to the policy route chain.
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
2023-12-22T5840: Add override for systemd kea-ctrl-agent.serviceViacheslav Hletenko
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88 there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password It cause the unit `kea-ctrl-agent.service` cannot start systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password) Override systemd kea-ctrl-agent.service do not check this file
2023-12-21Merge pull request #2665 from c-po/ndp-proxyChristian Breunig
T2898: add ndp-proxy service
2023-12-21frr: T4020: re-enable watchfrr in config as it is always runningChristian Breunig
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-20T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP
2023-12-16ocserv: T5796: add smoketest for new "http-security-headers" featureChristian Breunig
2023-12-16ocserv: T5796: add CLI knob "http-security-headers"fett0
OCserv manual recommended HTTP headers tobe included in the configuration. (cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 17:07:13 +0000