Age | Commit message (Collapse) | Author |
|
|
|
Note that this was updated for the fix in T5739.
|
|
This commit allows management of system images with either new or legacy
tools: 'add/delete/rename system image' and 'set default' are translated
appropriately on booting between images with the old and new tools.
Consequently, the warning of the initial commit of T4516 is dropped.
|
|
This commit adds the whole set of system image tools written from the scratch in
Python that allows performing all the operations on images:
* check information
* perform installation and deletion
* versions management
Also, it contains a new service that will update the GRUB menu and keep tracking
its version in the future.
WARNING: The commit contains non-reversible changes. Because of boot menu
changes, it will not be possible to manage images from older VyOS versions after
an update.
|
|
pim(6): T5733: add missing FRR related features
|
|
|
|
|
|
|
|
IGMP and PIM are two different but related things.
FRR has both combined in pimd. As we use get_config_dict() and FRR reload it
is better to have both centrally stored under the same CLI node (as FRR does,
too) to just "fire and forget" the commit to the daemon.
"set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
|
|
|
|
Migrate CLI configuration retrival to common get_config_dict(). In addition
add new functionality to VyOS that is PIM related and already available in FRR.
|
|
Some OpenVPN clients (OpenVPN3) do not understand address of
gateway for the pushed networks. It leads that pushed routes are
not installed at all.
Replace `subnet | first_host_address` to the `vpn_gateway` to fix it
|
|
Migration to 3.11.1 follow-up: This should make `ddclient.conf` parsing
more resilient to edge cases (particularly when `password` isn't the
last option right before the host parameter).
ddclient config parser applies special treatment to the password field
and would unwrap the quotes automatically.
Also, switch from now deprecated `use=no` to `use=disabled`.
|
|
mdns: T5723: Always reload systemd daemon before applying changes
|
|
Additionally, templatize system service override and move it to the
runtime path.
|
|
T5702: SNMP add interface-mib max-interfaces-number and prefix
|
|
T5716: Fix accel-ppp template down-limiter does not rely on fwmark
|
|
accel-ppp template shaper `down-limiter` does not rely on `fwmark`
Fix it
|
|
- Allow to configure only required interface prefixes
set service snmp mib interface 'eth'
set service snmp mib interface 'bond'
include_ifmib_iface_prefix eth bond
Sets the interface name prefixes to include in the IF-MIB data collection.
For servers with a large number of interfaces (ppp, dummy, bridge, etc)
the IF-MIB processing will take a large chunk of CPU for ioctl calls.
A set of space separated interface name prefixes will reduce the CPU
load for IF-MIB processing. For example, configuring
"include_ifmib_iface_prefix eth dummy lo" will include only interfaces
with these prefixes and ignore all others for IF-MIB processing.
- Allow to configure maximum interface number
set service snmp mib interface-max '100'
ifmib_max_num_ifaces NUM
Sets the maximum number of interfaces included in IF-MIB data collection.
For servers with a large number of interfaces (ppp, dummy, bridge, etc)
the IF-MIB processing will take a large chunk of CPU for ioctl calls
(on Linux). Setting a reasonable maximum for the CPU used will
reduce the CPU load for IF-MIB processing. For example, configuring
"ifmib_max_num_ifaces 500" will include only the first 500 interfaces
based on ifindex and ignore all others for IF-MIB processing.
|
|
Time interval in seconds to wait between DNS updates would be a bit
more intuitive as `interval` than `timeout`.
|
|
T5698 EVPN ESI Multihoming
|
|
T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessions
|
|
T5700: Fix deprecate telegraf plugin input net
|
|
Add `max-starting` option:
[common]
max-starting=N
Specifies maximum concurrent session attempts which server may processed
set service pppoe-server max-concurrent-sessions '30'
Useful to prevent high CPU utilization and compat execution
scripts per time.
|
|
DeprecationWarning: Value "false" for option "ignore_protocol_stats"
of plugin "inputs.net" deprecated since version 1.27.3 and will be
removed in 1.36.0: use the 'inputs.nstat' plugin instead
|
|
as it's done with facility. Create basic smoketest for syslog
|
|
T1797: Delete VPP from vyos-1x as it is implemented in addon
|
|
|
|
set interfaces bonding bond10 evpn es-df-pref '50'
set interfaces bonding bond10 evpn es-id '10'
set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab'
set interfaces bonding bond10 member interface 'eth3'
set interfaces bonding bond10 mode '802.3ad'
|
|
(valid for interfaces and groups) in firewal, nat and nat66.
|
|
T5541: firewall zone: re add firewall zone-base firewall
|
|
T5637: add new rule at the end of base chains for default-actions and log capabilities
|
|
|
|
pmacct: T5232: Fixed pmacct service control via systemctl
|
|
|
|
pmacct daemons have one very important specific - they handle control signals in
the same loop as packets. And packets waiting is blocking operation.
Because of this, when systemctl sends SIGTERM to uacctd, this signal has no
effect until uacct receives at least one packet via nflog. In some cases, this
leads to a 90-second timeout, sending SIGKILL, and improperly finished tasks.
As a result, a working folder is not cleaned properly.
This commit contains several changes to fix service issues:
- add a new nftables table for pmacct with a single rule to get the ability to
send a packet to nflog and unlock uacctd
- remove PID file options from the uacctd and a systemd service file. Systemd
can detect proper PID, and PIDfile is created by uacctd too late, which leads
to extra errors in systemd logs
- KillMode changed to mixed. Without this, SIGTERM is sent to all plugins and
the core process exits with status 1 because it loses connection to plugins too
early. As a result, we have errors in logs, and the systemd service is in a
failed state.
- added logging to uacctd
- systemctl service modified to send packets to specific address during a service
stop which unlocks uacctd and allows systemctl to finish its work properly
|
|
Bug introduced in https://github.com/vyos/vyos-1x/commit/8fb6e715d32e7eff77e413d8577059dd55b24c0a
|
|
openvpn: T5634: Remove support for insecure DES and Blowfish ciphers
|
|
|
|
|
|
T5530: isis: Adding loop free alternate feature
|
|
enables log capabilities for default-action in base chains. And of course, add option for enabling log for default-action
|
|
|
|
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send
packets of no more than n bytes. The value of n must be between 128 and 16384,
the default was always 1492 to match PPPoE MTU.
A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256
bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280.
CLI:
set interfaces pppoe pppoe0 mru 1280
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
|
|
Rename avahi-daemon config file to avahi-daemon.conf.j2 to match the
convention used by other config files.
|
|
This commit adds a new configuration option to the mDNS repeater service
to allow controlling which IP version to use for mDNS repeater.
Additionally, publishing AAAA record over IPv4 and A record over IPv6 is
disabled as suggested.
See:
- https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104
- https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
|
|
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
|
|
Enable TTL support for web-service based protocols in addition to
RFC2136 based (nsupdate) protocol.
Since TTL is not supported by all protocols, and thus cannot have a
configuration default, the existing XML snippet `include/dns/time-to-live.xml.i`
does not have common `<defaultValue>300</defaultValue>` anymore and is
instead added explicitly whenever necessary.
|