Age | Commit message (Collapse) | Author |
|
T4857: snmp: Fix error when not defining client|network under community
|
|
After the RESTRICTED view was introduced snmpd requires a network to be
specified. Before adding the RESTRICTED view snmpd always assumed the default
network 0.0.0.0/0.
This commit re-adds the build in default networks for IPv4 and IPv6 and
exposes it as a proper default to the CLI so the user is informed about it:
vyos@vyos# set service snmp community foooo
Possible completions:
authorization Authorization type (default: ro)
+ client IP address of SNMP client allowed to contact system
+ network Subnet of SNMP client(s) allowed to contact system (default:
0.0.0.0/0, ::/0)
|
|
sstp-client
|
|
T1993: PPPoE-server add section shaper and fwmark option
|
|
containers"
This reverts commit b17251334c57c2f6875c19ad4e6c6127aa9e1811.
|
|
container: T4959: Add container registry authentication config for containers
|
|
T4971: PPPoE server add named ip pool and attr Framed-Pool
|
|
Extended PPPoE-server rate-limiter to avoid shaping marked resources
Often this feature needs for ISP, which provides access to some IX
or its resources.
set service pppoe-server shaper fwmark '223'
|
|
|
|
Minimum acceptable MTU. If client will try to negotiate less then
specified MTU then it will be NAKed or disconnected if rejects
greater MTU.
Change 'min-mtu' from 1492 to 1280
|
|
Add a new feature to allow to use named pools
Also it can be used with RADIUS attribute 'Framed-Pool'
set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
|
|
T2408: dhcp-relay: Add listen-interface and upstream-interface feature
|
|
|
|
|
|
Route-target export/import for l2vpn-evpn vni xxx works as
leafNode with multiple values
We have to use "for" for such values
|
|
|
|
T4916: Rewrite IPsec peer authentication and psk migration
|
|
|
|
|
|
Adds CLI configuration options to configure RADIUS accounting for OpenConnect VPN sessions. This functionality cannot be used outside of the RADIUS OpenConnect VPN authentication mode
|
|
Rewrite strongswan IPsec authentication to reflect structure
from swanctl.conf
The most important change is that more than one local/remote ID in the
same auth entry should be allowed
replace: 'ipsec site-to-site peer <tag> authentication pre-shared-secret xxx'
=> 'ipsec authentication psk <tag> secret xxx'
set vpn ipsec authentication psk <tag> id '192.0.2.1'
set vpn ipsec authentication psk <tag> id '192.0.2.2'
set vpn ipsec authentication psk <tag> secret 'xxx'
set vpn ipsec site-to-site peer <tag> authentication local-id '192.0.2.1'
set vpn ipsec site-to-site peer <tag> authentication mode 'pre-shared-secret'
set vpn ipsec site-to-site peer <tag> authentication remote-id '192.0.2.2'
Add template filter for Jinja2 'generate_uuid4'
|
|
|
|
Some ISPs seem to use the host-uniq flag to authenticate client equipment.
Add CLI option in VyOS to allow specification of the host-uniq flag.
set interfaces pppoe pppoeN host-uniq <value>
|
|
|
|
|
|
|
|
|
|
T4857: SNMP: Implement FRR SNMP Recomendations
|
|
|
|
Excluded to not spam the log as there is an access restriction to that
folder which SNMP user can not access.
|
|
* Move CLI from "system ntp" -> "service ntp"
* Drop NTP server option preempt as not supported by chrony
|
|
T4118: Add default value any for connection remote-id
|
|
If IPsec "peer <tag> authentication remote-id" is not set
it should be "%any" by default
https://docs.strongswan.org/docs/5.9/swanctl/swanctlConf.html#_connections_conn_remote
Set XML default value in use it in the python vpn_ipsec.py script
|
|
Setting something like `protocols ospf area 10 range 10.10.0.0/16` without sub options doesn't work. This is because no range commands are generated when there is no leaf nodes set under the `range` tag node.
```
edit protocols ospf
set area 16 network 10.10.0.0/16
set area 16 range 10.10.0.0/16
commit
```
```
$ vtysh -c 'show run'
!
router ospf
auto-cost reference-bandwidth 100
timers throttle spf 200 1000 10000
network 10.10.0.0/16 area 16
exit
```
The generated FRR commands above is missing something like:
```
area 16 range 10.10.0.0/16
```
|
|
|
|
`passive_interface` is a leaf node. Also adds a smoketest.
|
|
Commit dafb0da2 ("static: T4883: add a description field for routing tables")
added an iproute2 description table but lacked checking if the key exists.
This has been fixed and also converted to Jinja2 to keep the "common" style
inside the routing protocols. It might feel overengineered indeed.
|
|
|
|
Allow multiple ports for high-availability virtual-server
The current implementation allows balance only one "virtual" address
and port between between several "real servers"
Allow matching "fwmark" to set traffic which should be balanced
Allow to set port 0 (all traffic) if we use "fwmark"
Add health-check script
set high-availability virtual-server 203.0.113.1 fwmark '111'
set high-availability virtual-server 203.0.113.1 real-server 192.0.2.11 health-check script '/bin/true'
set high-availability virtual-server 203.0.113.1 real-server 192.0.2.11 port '0'
|
|
Add ppp-options IPv6 interface id for vpn L2TP
- fixed or random interface identifier for IPv6
- peer interface identifier for IPv6
- whether to accept peer’s interface identifier
set vpn l2tp remote-access ppp-options ipv6-accept-peer-intf-id
set vpn l2tp remote-access ppp-options ipv6-intf-id 'random'
set vpn l2tp remote-access ppp-options ipv6-peer-intf-id 'calling-sid'
|
|
overlay2 is the preferred storage driver for all currently supported Linux
distributions, and requires no extra configuration.
|
|
container: T4870: Update podman to use overlay storage driver
|
|
Commit 13071a4a ("T4809: radvd: Allow the use of AdvRASrcAddress") added a new
feature to set the RA source-address. Unfortunately it missed a semicolon.
|
|
|
|
T4832: dhcp: Add IPv6-only dhcp option support (RFC 8925)
|
|
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
|
|
T4884: snmpd: add community6 fallback
|
|
1. Added in script update webproxy blacklists generation of all DBs
2. Fixed: if the blacklist category does not have generated db,
the template generates an empty dest category
in squidGuard.conf and a Warning message.
3. Added template generation for local's categories
in the rule section.
4. Changed syntax in the generation dest section for blacklist's
categories
4. Fixed generation dest local sections in squidGuard.conf
5. Fixed bug in syntax. The word 'allow' changed to the word 'any'
in acl squidGuard.conf
|
|
T4809: radvd: Allow the use of AdvRASrcAddress
|