summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2023-09-08T5518: Add basic MLD supportYuxiang Zhu
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd. I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved. Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks. Example commands: ``` // Enable on interface eth0 set protocols pim6 interface eth0 // Explicitly join multicast group ff18::1234 on interface eth1 set protocols pim6 interface eth1 mld join ff18::1234 // Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1 set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1 ```
2023-09-07T4072: add firewall bridge filtering. First implementation only applies for ↵Nicolas Fort
forward chain and few matchers. Should be extended in the future.
2023-09-06Merge pull request #2199 from sarthurdev/T4309Christian Breunig
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
2023-09-06Merge pull request #2208 from sarthurdev/T5550Christian Breunig
interface: T5550: Interface source-validation priority over global value
2023-09-05Merge pull request #2204 from sever-sever/T5480John Estabrook
T5480: Ability to disable SNMP for keepalived service VRRP
2023-09-05firewall: T3509: Split IPv4 and IPv6 reverse path filtering like on interfacessarthurdev
2023-09-05interface: T5550: Interface source-validation priority over global valuesarthurdev
- Migrate IPv4 source-validation to nftables - Interface source-validation value takes priority, fallback to global value
2023-09-05Merge pull request #2202 from sever-sever/T5548Christian Breunig
T5548: Fix load-balancing reverse-proxy timeouts
2023-09-05Merge pull request #2203 from sever-sever/T2958Christian Breunig
T2958: Fix path for leases to config directory
2023-09-05T5480: Ability to disable SNMP for keepalived service VRRPViacheslav Hletenko
By default we enable `--snmp` for keepalived unit service Add ability to disable it set high-availability vrrp disable-snmp
2023-09-05T2958: Fix path for leases to config directoryViacheslav Hletenko
The leases path should be in `/config` directory to save leases between reboots. The typo was in this commit c07055258b853de641d2a1353582800b24c514d2 Before this the idea was to get leases from `/run` directory only for livecd images. But then we added `/config` directory for livecd. PR was modified and incorrect variable directory `/run` was used. Fix it.
2023-09-05T5548: Fix load-balancing reverse-proxy timeoutsViacheslav Hletenko
By default haproxy uses timeouts in millisecond but we set timeouts in seconds from CLI Fix template to use 'seconds' units
2023-09-05Merge pull request #2184 from sever-sever/T2958Christian Breunig
T2958: Refactor DHCP-server systemd unit and lease
2023-09-04T2958: Refactor DHCP-server systemd unit and leaseViacheslav Hletenko
Render isc-dhcp-server systemd unit from configuration
2023-09-04conntrack: T4309: T4903: Refactor `system conntrack ignore` rule generation, ↵sarthurdev
add IPv6 support and firewall groups
2023-09-03T5543: IGMP: fix source address handling in static joinsYuxiang Zhu
The following command expects to join source-specific multicast group 239.1.2.3 on interface eth0, where the source address is 192.0.2.1. set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1 This command should generate FRR config: interface eth0 ip igmp ip igmp join 239.1.2.3 192.0.2.1 exit However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]` is mostly evaluated as `false` because `iface` is a loop variable from another loop.
2023-09-03ipoe: T5542: fix Jinja2 template and add missing dhcp relay configNiklas Polte
2023-09-03wireless: T5540: use elif in Jinja2 template for VHT channel widthChristian Breunig
2023-09-02wireless: T5540: fix VHT capability settings for 802.11acalainlamar
2023-09-01T5261: Add AWS load-balancing tunnel handlerViacheslav Hletenko
Add AWS load-balancing tunnel handler https://aws.amazon.com/blogs/networking-and-content-delivery/how-to-integrate-linux-instances-with-aws-gateway-load-balancer/ set service aws glb script on-create '/config/scripts/tmp.sh' set service aws glb script on-destroy '/config/scripts/tmp.sh' set service aws glb status format 'simple' set service aws glb status port '8282' set service aws glb threads tunnel '4' set service aws glb threads tunnel-affinity '1-2' set service aws glb threads udp '4' set service aws glb threads udp-affinity '0-3'
2023-08-26firewall: T5080: Disable conntrack unless required by rulessarthurdev
2023-08-25firewall: T5160: Remove unused zone templatesarthurdev
2023-08-25interface: T3509: Add per-interface IPv6 source validationsarthurdev
2023-08-25firewall: T3509: Add support for IPv6 return path filteringsarthurdev
2023-08-23Merge pull request #2159 from c-po/t5491-wifiChristian Breunig
wifi: T5491: allow white-/blacklisting station MAC addresses for security
2023-08-23T5448: Add configuration host-name for zabbix-agentViacheslav Hletenko
Ability to configure host-name for zabbix-agent set service monitoring zabbix-agent host-name 'r-vyos'
2023-08-20wifi: T5491: allow white-/blacklisting station MAC addresses for securityChristian Breunig
Station MAC address-based authentication means: * 'allow' accept all clients except the one on the deny list * 'deny' accept only clients listed on the accept list New CLI commands: * set interfaces wireless wlan0 security station-address mode <accept|deny> * set interfaces wireless wlan0 security station-address accept mac <mac> * set interfaces wireless wlan0 security station-address deny mac <mac>
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-17Revert: dhcp: T5428: always release lease from default VRFChristian Breunig
This reverts commit 9afcea251bdc895ffd49cb11f455fd636fdf817b A DHCP relese must also be originated from the VRF where the dhclient program is running, else the RELEASE message can not be send through the interface towards the DHCP server. The reason it did not work in the past was because of https://vyos.dev/T5476
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-15T5271: correct dict path in the template for OpenVPN peer fingerprintDaniil Baturin
2023-08-15T5270: generate 'dh none' unconditionally when dh-params is no presentDaniil Baturin
The condition is useless since OpenVPN simply switches to ECDH in all modes when the classic DH prime is not specified
2023-08-11T5160: firewall refactor: move <set firewall ipv6 ipv6-name ...> to <set ↵Nicolas Fort
firewall ipv6 name ...> . Also fix some unexpected behaviour with geoip.
2023-08-11T5160: firewall refactor: fix firewall template for correct rule parsing ↵Nicolas Fort
that contains fqnd and/or geo-ip in base chains. Fix mig script
2023-08-11T5160: firewall refactor: change firewall ip to firewall ipv4Nicolas Fort
2023-08-11T5160: firewall refactor: new cli structure. Update jinja templates, python ↵Nicolas Fort
scripts and src firewall
2023-08-10Merge pull request #2140 from sever-sever/T5448Daniil Baturin
T5448: Add service zabbix-agent
2023-08-09openvpn: T5271: add peer certificate fingerprint optionDaniil Baturin
2023-08-09T5448: Add service zabbix-agent version 2Viacheslav Hletenko
Add service zabbix-agent set service zabbix-agent directory '/config/zabbix/' set service zabbix-agent limits buffer-flush-interval '8' set service zabbix-agent limits buffer-size '120' set service zabbix-agent log debug-level 'warning' set service zabbix-agent log size '1' set service zabbix-agent server '192.0.2.5' set service zabbix-agent server-active 192.0.2.5 port '10051' set service zabbix-agent server-active 2001:db8::123
2023-08-07dhcp: T5428: always release lease from default VRFChristian Breunig
Otherwise packet can be received in a VRF that was already deleted. Image of the following CLI commands: del interface ethernet eth0 address dhcp del interface ethernet eth0 vrf red del vrf name red VRF could be deleted even if dhclient release was not yet completely processed.
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-08-06dyndns: T5445: add possibility to specify update interval (timeout)Christian Breunig
set service dns dynamic timeout <60-3600>
2023-08-05dhcpv6: T5428: client renewal fails when running inside VRFChristian Breunig
2023-08-05dhcp: T5428: remove hardcoded path to client runtime directoriesChristian Breunig
2023-08-04dhcp: T5428: client renewal fails when running inside VRFChristian Breunig
vyos@vyos# run show vrf MGMT processes 2282 sshd There is no dhclient process running in given VRF. dhclient complains it can not send out packets via the given interface (as it's not bound to that VRF) Aug 02 20:29:54 dhclient[1686]: send_packet: Network is unreachable Aug 02 20:29:54 dhclient[1686]: send_packet: please consult README file regarding broadcast address. Aug 02 20:29:54 dhclient[1686]: dhclient.c:3001: Failed to send 300 byte long packet over fallback interface.
2023-08-04frr: T5415: make mgmtd only listen on localhostChristian Breunig
2023-08-04dns: T4353: fix warning "Wait at least 5 minutes between update attempts"Christian Breunig
2023-07-31dhcpv6-pd: T5387: add support for no-release flag1vivy
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit. vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP] * Todo: render Jinja2 template and fill it vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n dhcpv6-client: T5387: fix missing / from filepaths
2023-07-27Merge pull request #2105 from sever-sever/T5368Daniil Baturin
T5368: service ids ddos-protection add support sflow mode
2023-07-27openvpn: T4974: move CLI node "enable-dco" -> "offload dco" to match other ↵Christian Breunig
inetfaces Keep a common CLI structure by re-using the already established offload node from ethernet.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 09:23:55 +0000