summaryrefslogtreecommitdiff
path: root/data
AgeCommit message (Collapse)Author
2021-12-06mpls: ldp: T3753: add proper indention to Jinja2 templateChristian Poessinger
2021-12-06mpls: ldp: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-12-06sflow: T4046: Add source-address for sflowViacheslav
2021-12-04bfd: T4043: add support for passive modeChristian Poessinger
Mark session as passive: a passive session will not attempt to start the connection and will wait for control packets from peer before it begins replying. This feature is useful when you have a router that acts as the central node of a star network and you want to avoid sending BFD control packets you don't need to. The default is active-mode
2021-12-04bfd: T3310: add key_mangling option when calling get_config_dict()Christian Poessinger
2021-11-29Merge pull request #1076 from DmitriyEshenko/current-22112021-01Christian Poessinger
tftp: T4012: Add TFTP VRF support
2021-11-28ospfv3: T3928: add VRF supportChristian Poessinger
set vrf name foo protocols ospfv3
2021-11-27isis: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27rpki: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27ripng: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27rip: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27ospfv3: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27bgp: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27policy: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
Every node in running config now has an explicit "exit" tag
2021-11-27ospf: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
Every node in running config now has an explicit "exit" tag
2021-11-27bfd: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
Every node in running config now has an explicit "exit" tag.
2021-11-27ospf: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
FRR 7.5 router ospf passive-interface default no passive-interface eth0.202 Changed int FRR 8 to interface eth0.202 no ip ospf passive ! router ospf ospf router-id 172.18.254.202 log-adjacency-changes detail passive-interface default
2021-11-27ospfv3: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
2021-11-27ospf: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
2021-11-27bfd: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
2021-11-27bfd: T3753: fix Jinja2 "echo-interval" indentionChristian Poessinger
2021-11-23tftp: T4012: Add TFTP VRF supportDmitriyEshenko
2021-11-21Merge pull request #1074 from sever-sever/T4010Christian Poessinger
dmvpn: T4010: Fix template ipsec profile rekey_time
2021-11-18dmvpn: T4010: Fix template ipsec profile rekey_timeViacheslav
2021-11-18console-server: T2490: display /etc/issue.net on SSH loginsChristian Poessinger
2021-11-18dhcp: T4008: change client retry interval form 300 -> 60 secondsChristian Poessinger
(cherry picked from commit e1539b6fffaf10863e41a73a380f9de40f6aece6)
2021-11-15vrf: T3960: when adding multiple VRFs and VNIs - do not delete previous onesChristian Poessinger
2021-11-07protocols: static: T3680: do not delete DHCP received routesChristian Poessinger
An ISC DHCP hook script is used to install the received default route into FRR by simple calls to vtysh. By moving to frr-reload.py the DHCP default route was deleted as it was not found in the running config. This commit checks all interfaces if DHCP is enabled and if so - will dynamically add the route to the generated FRR configuration.
2021-11-03sstp: T2566: use XML defaultValue over Jinja2 hardcoded valueChristian Poessinger
(cherry picked from commit 01ed77040ec9493e4ca1cf868ff3c22847da4487)
2021-11-03sstp: T2566: Fix to allow IPv6 only poolsViacheslav
To allow IPv6 only for vpn sstp sessions we have to add 'ppp-options' which can disable IPv4 allocation explicity. Additional IPv6 ppp-options and fix template for it. (cherry picked from commit dd036c62d1370f655a8d2075577597f24ffff7dc)
2021-11-01Merge branch 'current' into T3350-sagittazdc
2021-10-31openvpn: T3834: Support for Two Factor Authentication totpKim
2021-10-26bgp: T3945: relax Jinja2 for loop for aggregate-addressChristian Poessinger
2021-10-26bgp: T3945: Add route-map for aggregate-addressViacheslav
2021-10-25Merge pull request #1037 from sever-sever/T2683Christian Poessinger
hosts: T2683: Allow multiple entries for static-host-mapping
2021-10-25snmp: T2763: Add protocol TCP for service snmpViacheslav
2021-10-22hosts: T2683: Allow multiple entries for static-host-mappingViacheslav
2021-10-20Merge pull request #1030 from sarthurdev/mdns-avahiChristian Poessinger
mdns: T3917: Change to avahi-daemon for IPv4 + IPv6 mDNS repeater
2021-10-19mdns: T3917: Change to avahi-daemon for IPv4 + IPv6 mDNS repeatersarthurdev
2021-10-18Merge pull request #1022 from sever-sever/T3897Christian Poessinger
ddclient: T3897: Add option for IPv6 Dynamic DNS
2021-10-18ddclient: T3897: Add option for IPv6 Dynamic DNSViacheslav
2021-10-16l2tp: T3724: allow setting accel-ppp l2tp host-nameMarek Isalski
2021-10-15dhclient: T3832: Add hexadecimal format for client-idViacheslav
The hedadecimal option dhcp-cliend-identifier format is required to set values without quotes, separated by colons.
2021-10-13ntp: T3904: Fix NTP pool associationsGeorgiy Tugai
As of NTP 4.2.7, 'nopeer' also blocks pool associations. See https://bugs.ntp.org/show_bug.cgi?id=2657 See also https://github.com/geerlingguy/ansible-role-ntp/pull/84 (cherry picked from commit 854c68d43d8f1cf20417edd12284ea20f9e7ec9a)
2021-10-10lcd: T2564: add support for hd44780 displaysChristian Poessinger
2021-10-07Merge branch 'current' into 2faKim
2021-10-07openvpn: T3805: drop privileges using systemd - required for rtnetlinkChristian Poessinger
2021-10-07pull request fixesKim Hagen
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-10-04OpenVPN: T3350: Changed custom options for OpenVPN processingzsdc
Custom OpenVPN options moved back to the command line from a configuration file. This should keep full compatibility with the `crux` branch, and allows to avoid mistakes with parsing options that contain `--` in the middle. The only smart part of this - handling a `push` option. Because of internal changes in OpenVPN, previously it did not require an argument in the double-quotes, but after version update in `equuleus` and `sagitta` old syntax became invalid. So, all the `push` options are processed to add quotes. The solution is still not complete, because if a single config line contains `push` with other options, it will not work, but it is better than nothing.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 16:29:20 +0000