Age | Commit message (Collapse) | Author |
|
* Add support for IS-IS advertise-high-metrics
set protocols isis advertise-high-metrics
* Add support for IS-IS advertise-passive-only
set protocols isis advertise-passive-only
(cherry picked from commit f7d35c15256ea74ab32c9b978a5c6fdbd659a7a0)
|
|
There is no EIGRP support in VyOS 1.4/sagitta
|
|
AgentX does not work stable. From time to time we see the system
service crashing/degrading if something is wrong with SNMP from
util net-snmp.
We should disable it by default and enable it only if configured.
set high-availability vrrp snmp
(cherry picked from commit 47875457cd8b176f7f23a3141175d745aeb14d8a)
|
|
T5480: Ability to disable SNMP for keepalived service VRRP
|
|
Add the ability to use the option all for remove-private-as.
Remove private ASNs in outbound updates.
all - Apply to all AS numbers
set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
(cherry picked from commit d72024b11e127cc11931cfaee4d07944dceb1ea9)
|
|
Linux netfilter patch https://patchwork.ozlabs.org/project/netfilter-devel/patch/d0f84a97f9c86bec4d537536a26d0150873e640d.1439559328.git.daniel@iogearbox.net/
adds direction support for conntrack zones, which makes it possible to
do NAT with conflicting IP address/port tuples from multiple, isolated tenants on a host.
According to the description of the kernel patch:
> ... overlapping tuples can be made unique with the zone identifier in
original direction, where the NAT engine will then allocate a unique
tuple in the commonly shared default zone for the reply direction.
I did some basic tests in my lab and it worked fine to forward packets
from eth0 to pppoe0.
- eth0 192.168.1.1/24 in VRF red
- pppoe0 dynamic public IP from ISP VRF default
- set vrf name red protocols static route 0.0.0.0/0 interface pppoe0 vrf 'default'
- set protocols static route 192.168.1.0/24 interface eth0 vrf 'red'
`conntrack -L` shows something like:
```
tcp 6 113 ESTABLISHED src=192.168.1.2 dst=1.1.1.1 sport=58946 dport=80 zone-orig=250 packets=6 bytes=391 src=1.1.1.1 dst=<my-public-ip> sport=80 dport=58946 packets=4 bytes=602 [ASSURED] mark=0 helper=tns use=1
```
It would be much appreciated if someone could test this with more
complex VRF setup.
|
|
By default we enable `--snmp` for keepalived unit service
Add ability to disable it
set high-availability vrrp disable-snmp
(cherry picked from commit 5ae730a52de2f284e45cd433bb0cf66c8508f2f7)
|
|
T5548: Fix load-balancing reverse-proxy timeouts
|
|
By default haproxy uses timeouts in millisecond but we set timeouts
in seconds from CLI
Fix template to use 'seconds' units
(cherry picked from commit 257019520c49c20824b7e5cad01d2d29ef5f62e6)
|
|
Render isc-dhcp-server systemd unit from configuration
|
|
The following command expects to join source-specific multicast group 239.1.2.3
on interface eth0, where the source address is 192.0.2.1.
set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1
This command should generate FRR config:
interface eth0
ip igmp
ip igmp join 239.1.2.3 192.0.2.1
exit
However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]`
is mostly evaluated as `false` because `iface` is a loop variable from another loop.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
wifi: T5491: allow white-/blacklisting station MAC addresses for security
|
|
Ability to configure host-name for zabbix-agent
set service monitoring zabbix-agent host-name 'r-vyos'
|
|
Station MAC address-based authentication means:
* 'allow' accept all clients except the one on the deny list
* 'deny' accept only clients listed on the accept list
New CLI commands:
* set interfaces wireless wlan0 security station-address mode <accept|deny>
* set interfaces wireless wlan0 security station-address accept mac <mac>
* set interfaces wireless wlan0 security station-address deny mac <mac>
|
|
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation
mode").
|
|
For conntrack ignore priority must be less then -200
|
|
This reverts commit 9afcea251bdc895ffd49cb11f455fd636fdf817b
A DHCP relese must also be originated from the VRF where the dhclient program is
running, else the RELEASE message can not be send through the interface towards
the DHCP server.
The reason it did not work in the past was because of https://vyos.dev/T5476
|
|
|
|
|
|
The condition is useless since OpenVPN simply switches to ECDH in all modes
when the classic DH prime is not specified
|
|
firewall ipv6 name ...> . Also fix some unexpected behaviour with geoip.
|
|
that contains fqnd and/or geo-ip in base chains. Fix mig script
|
|
|
|
scripts and src firewall
|
|
T5448: Add service zabbix-agent
|
|
|
|
Add service zabbix-agent
set service zabbix-agent directory '/config/zabbix/'
set service zabbix-agent limits buffer-flush-interval '8'
set service zabbix-agent limits buffer-size '120'
set service zabbix-agent log debug-level 'warning'
set service zabbix-agent log size '1'
set service zabbix-agent server '192.0.2.5'
set service zabbix-agent server-active 192.0.2.5 port '10051'
set service zabbix-agent server-active 2001:db8::123
|
|
Otherwise packet can be received in a VRF that was already deleted.
Image of the following CLI commands:
del interface ethernet eth0 address dhcp
del interface ethernet eth0 vrf red
del vrf name red
VRF could be deleted even if dhclient release was not yet completely
processed.
|
|
order to avoid empty value and problems when removing such parameters
|
|
set service dns dynamic timeout <60-3600>
|
|
|
|
|
|
vyos@vyos# run show vrf MGMT processes
2282 sshd
There is no dhclient process running in given VRF. dhclient complains it can
not send out packets via the given interface (as it's not bound to that VRF)
Aug 02 20:29:54 dhclient[1686]: send_packet: Network is unreachable
Aug 02 20:29:54 dhclient[1686]: send_packet: please consult README file regarding broadcast address.
Aug 02 20:29:54 dhclient[1686]: dhclient.c:3001: Failed to send 300 byte long packet over fallback interface.
|
|
|
|
|
|
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit.
vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP]
* Todo: render Jinja2 template and fill it
vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli
vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag
vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n
dhcpv6-client: T5387: fix missing / from filepaths
|
|
T5368: service ids ddos-protection add support sflow mode
|
|
inetfaces
Keep a common CLI structure by re-using the already established offload
node from ethernet.
|
|
T5154: NTP: allow maximum of one ipv4 and one ipv6 address on paramet…
|
|
<listen-address>. Also allow only one single value <interface>.
|
|
T4974:add/fixed enable ovpn-dco by default
|
|
|
|
|