summaryrefslogtreecommitdiff
path: root/data
AgeCommit message (Collapse)Author
2024-01-30vrf: T5973: move initial conntrack firewall table to startupChristian Breunig
There is no need to add and remove this table during runtime - it can lurk in the standard firewall init code. (cherry picked from commit 89f0d347bfe5e468355817a617dc71823a58c284)
2024-01-23image-tools: T5980: add support for configurable kernel boot optionsJohn Estabrook
(cherry picked from commit 1b1569d5b88a20994fc65fd529f8103db371bf3f)
2024-01-23bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> * set protocols bfd profile <name> minimum-ttl <1-254> (cherry picked from commit 1f07dcbddfcfdbb9079936ec479c5633934dd547)
2024-01-22op-mode: T5969: list multicast group membershipChristian Breunig
cpo@LR1.wue3:~$ show ip multicast group interface eth0.201 Interface Family Address ----------- -------- --------- eth0.201 inet 224.0.0.6 eth0.201 inet 224.0.0.5 eth0.201 inet 224.0.0.1 cpo@LR1.wue3:~$ show ipv6 multicast group interface eth0 Interface Family Address ----------- -------- ----------------- eth0 inet6 ff02::1:ff00:0 eth0 inet6 ff02::1:ffbf:c56d eth0 inet6 ff05::2 eth0 inet6 ff01::2 eth0 inet6 ff02::2 eth0 inet6 ff02::1 eth0 inet6 ff01::1 (cherry picked from commit 3eea8dbed1bd201373eb8a452239d9565d468b33)
2024-01-22sflow: T5968: add VRF supportChristian Breunig
Add support to run hsflowd in a dedicated (e.g. management) VRF. Command will be "set system sflow vrf <name>" like with any other service (cherry picked from commit 64473fa6f320375fb3d3de4de9e729f456ee5ae2)
2024-01-22Merge pull request #2856 from c-po/firewall-backportsChristian Breunig
firewall: T5729: T5681: T5217: backport subsystem from current branch
2024-01-22firewall: T5729: T5681: T5217: backport subsystem from current branchChristian Breunig
This is a combined backport for all accumulated changes done to the firewall subsystem on the current branch.
2024-01-21ntp: T5692: add support to configure leap second behaviorChristian Breunig
* set service ntp leap-second [ignore|smear|system|timezone] Where timezone is the new and old default resulting in adding "leapsectz right/UTC" to chrony.conf. The most prominent new option is "smear" which will add leapsecmode slew maxslewrate 1000 smoothtime 400 0.001 leaponly to chrony. See https://chrony-project.org/doc/4.3/chrony.conf.html leapsecmode for additional information (cherry picked from commit 7ae064bab0010dff8827a0ed5e1239d2778dc7c1)
2024-01-18conntrack: T5376: T5779: backport from currentChristian Breunig
Backport of the conntrack system from current branch. (cherry picked from commit fd0bcaf12) (cherry picked from commit 5acf5aced) (cherry picked from commit 42ff4d8a7) (cherry picked from commit 24a1a7059)
2024-01-17T5953: Changed values of 'close-action' to Strongswan valuesaapostoliuk
Changed the value from 'hold' to 'trap' in the 'close-action' option in the IKE group. Changed the value from 'restart' to 'start' in the 'close-action' option in the IKE group. (cherry picked from commit 8870fabf1b4358618fca7db459515106653214b5)
2024-01-17image-tools: T5923: update system_console.py for new GRUB file structureJohn Estabrook
Add util function to set serial console speed in accordance with revised GRUB file structure; in keeping with the intentions of the config_mode script, adjust the GRUB var 'console_speed' to only modify ttyS0. (cherry picked from commit 5ceaff2ef970cb9c567ac317bafbffca5b073f4a)
2024-01-16T4658: Renamed DPD action value from 'hold' to 'trap'aapostoliuk
Renamed DPD action value from 'hold' to 'trap' (cherry picked from commit 9f4aee5778eefa0a17d4795430d50e4a046e88b0)
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address> (cherry picked from commit 7349927908206fa83a7295d643f56950309efb4f)
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575> (cherry picked from commit d7e248ba514108461ca9d5875c0be077c80ceca7)
2024-01-12T5925: Containers change systemd KillModeViacheslav Hletenko
By default we use mode `none` for containers Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. (cherry picked from commit 4c71c46cbb840167708e75e902de5bfc9e31a03e)
2024-01-12image-tools: T5910: explicitly set transmission speed of serial consoleJohn Estabrook
GRUB defaults to 9600 in case of serial console; explicitly set to 115200. (cherry picked from commit 70122bef58eaa0084695f89c410992f8d7c1f9f6)
2024-01-12Revert "syslog: T1487: store all journalctl log files also in syslog"Christian Breunig
This reverts commit 61817dbb3f2667bcb0fbd734d70daeb2c4672720.
2024-01-11syslog: T1487: store all journalctl log files also in syslogChristian Breunig
This is useful to send the journal logs to external syslog servers (cherry picked from commit 800c85a20a00278ab07bbcccd85b753b1ca31e21)
2024-01-11Merge pull request #2789 from vyos/mergify/bp/sagitta/pr-2777Christian Breunig
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp (backport #2777)
2024-01-11Merge pull request #2793 from sarthurdev/T5550_sagittaChristian Breunig
interface: T5550: Interface source-validation priority over global value (backport)
2024-01-10T5688: Changed 'range' to multi in 'client-ip-pool' for accell-pppaapostoliuk
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp services. Added completionHelp to default-pool and next-pool. Fixed verification in vpn l2tp config script. (cherry picked from commit 4ffec67d04670192d9b722353cbaef04cb0ba129)
2024-01-10Merge pull request #2783 from vyos/mergify/bp/sagitta/pr-2263Christian Breunig
T5530: isis: Adding loop free alternate feature (backport #2263)
2024-01-10T5530: isis: Adding loop free alternate featureCheeze_It
(cherry picked from commit 7a2b70bd73c8579a885348b93b8addfb20fb006c)
2024-01-10https: T5902: remove virtual-host configurationChristian Breunig
We have not seen the adoption of the https virtual-host CLI option. What it did? * Create multiple webservers each listening on a different IP/port (but in the same VRF) * All webservers shared one common document root * All webservers shared the same SSL certificates * All webservers could have had individual allow-client configurations * API could be enabled for a particular virtual-host but was always enabled on the default host This configuration tried to provide a full webserver via the CLI but VyOS is a router and the Webserver is there for an API or to serve files for a local-ui. Changes Remove support for virtual-hosts as it's an incomplete and thus mostly useless "thing". Migrate all allow-client statements to one top-level allow statement. (cherry picked from commit d0d3071e99eb65edb888c26ef2fdc9e038438887)
2024-01-08https: T5886: migrate https certbot to new "pki certificate" CLI treeChristian Breunig
(cherry picked from commit 9ab6665c80c30bf446d94620fc9d85b052d48072)
2024-01-06Merge pull request #2763 from vyos/mergify/bp/sagitta/pr-1637Christian Breunig
openvpn: T3214: fix server-ipv6 and nopool handling (backport #1637)
2024-01-06openvpn: T3214: specify nopool on --server line only if neededAntonio Quartulli
The --server directive will already create a pool automatically. For this reason noppol should be used only when an explicit client-ip-pool was configured by the user. If that's not the case, then the nopool flag should not be specified and no manual pool should be configured. Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> (cherry picked from commit 0ccbbca01b22232b5cba63d64ab00eb54af7b068)
2024-01-06dns: T5900: fix smoketests for serve-stale-extension and ↵Christian Breunig
exclude-throttle-address This fixes commit 199ceb1f0a ("dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns features") where after the latest review round the Jinja2 template was inconsitently changed and smoketests were not re-run. (cherry picked from commit 9baeafa890f7b1d3829df633322fb4288e9ea882)
2024-01-06dns: T5900: add dont-throttle-netmasks and serve-stale-extensions powerdns ↵fvlaicu
features (cherry picked from commit 199ceb1f0a820c838dea6862371a3121b3d9f3a9)
2024-01-03Merge pull request #2719 from c-po/sagitta-backports-accel-pppChristian Breunig
Backports for Accel-PPP based serviced T5801, T5842 and T5688
2024-01-02T5474: remove "aws glb" XML definitions as feature is not available in VyOS 1.4Christian Breunig
Files got added by accident in commit c9eaafd9f ("T5474: establish common file name pattern for XML conf mode commands")
2024-01-02vyos-configd: T4942: include config-management scriptChristian Breunig
(cherry picked from commit ad4958ff7b1a25564fcc6931d604288d7ff0a1d2)
2024-01-02vyos-configd: T563: include webproxy scriptChristian Breunig
(cherry picked from commit dd2a1955d66926dc4a987bad0acc52dcc6f5d433)
2024-01-02vyos-configd: T4222: include SLA (OWAMP and TWAMP) scriptChristian Breunig
(cherry picked from commit c2dfba97446e9411b182f07c6227cc9427f247a8)
2024-01-02vyos-configd: T5261: include AWS GLB scriptChristian Breunig
(cherry picked from commit 3bd1a8eac54d6d4610e239088d91c145f748d12c)
2024-01-01T5842: Rewritten PPTP to get_config_dictaapostoliuk
Rewritten PPTP to get_config_dict Fixed 'dynamic-author' commands. These commands did not create anything in accel-ppp config. (cherry picked from commit f39eb894d991d296a82c69d1ab783011b5d0ed2f)
2024-01-01T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP (cherry picked from commit 09e0a2ca035ee39a68a510b28cc74560669d0420)
2024-01-01T5474: establish common file name pattern for XML conf mode commandsChristian Breunig
We will use _ as CLI level divider. The XML definition filename and also the Python helper should match the CLI node. Example: set interfaces ethernet -> interfaces_ethernet.xml.in set interfaces bond -> interfaces_bond.xml.in set service dhcp-server -> service_dhcp-server-xml.in (cherry picked from commit 4ef110fd2c501b718344c72d495ad7e16d2bd465)
2023-12-31Merge pull request #2725 from vyos/mergify/bp/sagitta/pr-2651Daniil Baturin
firewall: T5834: Rename 'enable-default-log' to 'default-log' (backport #2651)
2023-12-30T5870: ipsec remote access VPN: add x509 ("pubkey") authentication.Lucas Christian
(cherry picked from commit 656934e85cee799dba5b495d143f6be445ac22d5)
2023-12-30firewall: T5834: Add support for default log for route policyIndrajit Raychaudhuri
One can now do `set policy route foo default-log` which will add log to the policy route chain. (cherry picked from commit 6278ce9b7cb2060c8226a60ccbdb580a0d8a3fb5)
2023-12-28T5859: Fixed format of pool range in the accel-ppp configaapostoliuk
Fixed format of ipv4 pool range from 'x.x.x.x-x.x.x.y' to 'x.x.x.x-y' (cherry picked from commit 714a6b1dd5e4de6c85911fa64f4b5f37b44979cf)
2023-12-28accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different. (cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-21frr: T4020: re-enable watchfrr in config as it is always runningChristian Breunig
(cherry picked from commit 42614633901713e6472b43f95065d215344843b1)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-16image: T4516: ensure compatibility with legacy RAID 1 installsJohn Estabrook
(cherry picked from commit bd701768796d6ebb03ca943faf96d1dbea030edd)
2023-12-16image: T4516: use copy of pw_reset script for install, link for compatJohn Estabrook
Note that this was updated for the fix in T5739. (cherry picked from commit 424c9b19fd54598081e965c3364b082c5ef984de)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 08:36:46 +0000