summaryrefslogtreecommitdiff
path: root/debian
AgeCommit message (Collapse)Author
2020-07-25Revert "Merge pull request #423 from thomas-mangin/T2494"Christian Poessinger
This reverts commit bfbf51acb2d4b6b5fe2d22d39f7259686f98d2a0, reversing changes made to 1a85e758b105d493bb9d95916816bd206345bc5d.
2020-07-25Merge pull request #423 from thomas-mangin/T2494Christian Poessinger
systemd: T2494: allow to restart vyos-hostsd without consequence
2020-07-18ndptool: T2706: Support NDP protocol monitoringjack9603301
It supports NDP protocol monitoring. The submission supports the following features: - Support the monitoring of specified port or all ports - Supports monitoring of specific message types - Support sending specific NDP message
2020-07-04Merge pull request #487 from DmitriyEshenko/1x-impl-fnmDaniil Baturin
ids: T2659: Implement fastnetmon support
2020-07-03ids: T2659: Implement fastnetmon supportDmitriyEshenko
2020-06-28T2638: FRR: New framework for configuring FRRRunar Borge
This commit adds the python module vyos.frr that support reading and modifying the frr cofiguration. Functions get_configuration() : Collects the configuration from FRR and returns it as a string reload_configuration() : uses frr-reload.py to activate a new configuration. The configuration applied will overwrite the current configuration. mark_configuration() : Does syntax check/validation and add "end" tags to the configuration The marked configuration will be returned as a string A syntax fault will render an Exception execute() : Execute a command inside vtysh configure() : Executes a command in vtysh config mode replace_section() / _replace_section() : Adds the ability to replace a section of frr code remove_section() : Removes the specified configuration block from the config For now this supports replacing complete config sub-blocks of configuration and selecting the daemon to replace inside. This should work for most daemons, but static routing will still be an issue because this is not a separate sub-config mode
2020-06-25systemd: T2494: use Type=notify with daemonThomas Mangin
Notify systemd via the notify API when the python daemon are ready to take connection https://github.com/torfsen/python-systemd-tutorial
2020-06-22Merge branch 'T2588' of https://github.com/thomas-mangin/vyos-1x into ↵Christian Poessinger
default-doct * 'T2588' of https://github.com/thomas-mangin/vyos-1x: xml: T2588: code to extract defaults values from xml
2020-06-22xml: T2588: code to extract defaults values from xmlThomas Mangin
2020-06-22Debian: remove duplicate build dependencyChristian Poessinger
2020-06-22Merge pull request #452 from jjakob/T2486-dns-hostsd-fixesDaniil Baturin
T2486: DNS, vyos-hostsd fixes
2020-06-18console-server: T2490: add SSH supportChristian Poessinger
A user can define a port under the SSH node per device. WHen connecting to that port and authenticating using regular credentials we will immediately drop to the serial console. This is the same as executing "connect serial-proxy <name>".
2020-06-18console-server: T2490: replace ser2net with conserverChristian Poessinger
2020-06-18console-server: T2490: initial supportChristian Poessinger
2020-06-11vyos-hostsd: T2583: add dependency on python3-voluptuousJernej Jakob
2020-06-11dhcp(v6)-server: T2583: run as 'dhcpd' userJernej Jakob
Add a 'dhcpd' system user that is a member of hostsd group and can connect to vyos-hostsd. Run dhcpd as this user.
2020-06-11vyos-hostsd: T2583: add hostsd groupJernej Jakob
To better control access from other daemons that may not be running as root, create a new group 'hostsd' to which the other daemons running users can be added. Run vyos-hostsd as root:hostsd to create the socket file with correct user and group.
2020-06-11Debian: fix warning about undefined substitution variablesChristian Poessinger
warning: Depends field of package vyos-1x: substitution variable ${shlibs:Depends} used, but is not defined warning: Depends field of package vyos-1x-vmware: substitution variable ${shlibs:Depends} used, but is not defined Remove variables from dependency list as we have explicit non architecture dependend dependencies.
2020-06-07usb: op-mode: T2560: display USB interface informationChristian Poessinger
vyos@vyos:~$ show system usb /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 2, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 3, Class=Vendor Specific Class, Driver=qcserial, 480M |__ Port 3: Dev 4, If 8, Class=Vendor Specific Class, Driver=qmi_wwan, 480M vyos@vyos:~$ show system usb serial No USB to serial converter connected vyos@vyos:~$ show system usb serial Device Model Vendor ------ ------ ------ usb0b1.3.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.3p1.0 MC7710 Sierra Wireless, Inc. usb0b1.3p1.2 MC7710 Sierra Wireless, Inc. usb0b1.3p1.3 MC7710 Sierra Wireless, Inc. usb0b1.4p1.0 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.1 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.2 Quad_RS232-HS Future Technology Devices International, Ltd usb0b1.4p1.3 Quad_RS232-HS Future Technology Devices International, Ltd
2020-06-07op-mode: T2559: add "show environment sensors" commandChristian Poessinger
vyos@vmware:~$ show environment sensors VyOS running under hypervisor, no sensors available vyos@apu4:~$ show environment sensors ath10k_hwmon-pci-0500 temp1: N/A k10temp-pci-00c3 temp1: +54.6°C (high = +70.0°C) (crit = +105.0°C, hyst = +104.0°C) fam15h_power-pci-00c4 power1: 3.28 W (interval = 0.01 s, crit = 6.00 W)
2020-06-04Revert "add dependency on debian tshark package"Christian Poessinger
This reverts commit 44355e6525daec62120601073065f63c9f9a7993.
2020-06-01wake-on-lan: op-mode: T2526: add CLI implementationChristian Poessinger
Wake up host vyos@vyos:~$ wake-on-lan interface eth0.201 host a:b:c:d:e:f Wake up invalid host vyos@vyos:~$ wake-on-lan interface eth0.201 host a:b:c:d:e:f:f etherwake: The Magic Packet host address must be specified as - a station address, 00:11:22:33:44:55, or - a hostname with a known 'ethers' entry.
2020-05-30Debian: remove vyos-qat-kernel-modules & vyos-qat-utilities dependenciesChristian Poessinger
2020-05-22nat: T2460: migrate to new Python implementationChristian Poessinger
2020-05-21nat: T2460: add src/op_mode/show_nat_translations.pyThomas Mangin
2020-05-21macsec: T2023: generate secure channel keys in operation modeChristian Poessinger
2020-05-17dhcpv6-pd: T421: migrate from ISC dhclient to wide-dhcpv6-clientChristian Poessinger
ISC does not support running the client on PPP(oE) interfaces which makes it unusable for DHCPv6 Prefix Delegation tasks. Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Unsupported device type 512 for "pppoe0"
2020-05-16Debian: add required dependency on systemdChristian Poessinger
2020-05-16nat: T2198: migrate "show nat" commands to XML and PythonChristian Poessinger
- "show nat source|destination statistics" is now implemented in Python - "show nat source|destination rules" needs a new implementation, see T2459 - "show nat source|destination translations" has been copied over from the old repo and is here until it is rewritten, this was not possible for "rules" as there would have been too much dependencies. This one only requires libxml-simple-perl
2020-05-16nat: T2198: make use of jmespath when walking nftables JSON outputChristian Poessinger
2020-05-16nat: T2198: automatically determine handler numbersChristian Poessinger
When instantiating NAT it is required to isntall some nftable jump targets. The targets need to be added after a specific other target thus we need to dynamically query the handler number. This is done by get_handler() which could be moved to vyos.util at a later point in time so it can be reused for a firewall rewrite.
2020-05-16nat: T2198: move from iptables to nftablesChristian Poessinger
2020-05-16nat: T2198: initial XML and Python representationChristian Poessinger
2020-05-09T2267: Versioning: Update version tag from GIT repoRunar Borge
This commit will update the version field of the generated deb package from the git repo version tag. the tag needs to be in the format "vyos/<version>" eg. "vyos/1.2.5" 1.2.5 is then used as the version The version field will be one of the following syntaxes: on a commit: - <version>-<commits from tag>-g<commit id> eg. 1.2.5-4-g23232343 on a commit with unstaged changes: - <version>-<commits from tag>-g<commit id>+dirty eg. 1.2.5-4-g23232343+dirty This will make it clear what state the repo was in when the package was generated. It is possible to remove the number and commit id on the tagged commit, but i've decided to use the same format for all commits tagged or not. as for now the tagged commit will be sufixed with -0-g<commit id> if no valid tag is recieved from `git describe`, the script uses a 0.0 version number. The changelog is also updated to reflext that we dont use it and refers to the Git Changelog and vyos release-notes
2020-05-07T2431: use native versions of validate-value and numeric validator.Daniil Baturin
2020-05-06http api: T2395: add waitress as production WSGI serverJohn Estabrook
2020-05-06http api: T2395: replace bottle with flask as microframeworkJohn Estabrook
2020-04-26salt: T2382: run as user minionChristian Poessinger
2020-04-26salt: T2382: add missing dependency on salt-minionChristian Poessinger
2020-04-23interfaces: T2362: sysctl to not generate IPv6 link-local addreses by defaultJernej Jakob
2020-04-13dhcpv6-relay: T2185: migrate from SysVinit to systemdChristian Poessinger
2020-04-09Debian: T640: explicitly add easy-rsaChristian Poessinger
easy-rsa is used by e.g. OpenVPN installation and was dropped when enabling "--apt-recommends false" in VyOS build system. Dependency has been explicitly added.
2020-03-28wwan: T1988: add support for Sierra Wireless MC7710 modemChristian Poessinger
2020-03-28wwan: T1988: initial XML/Python representationChristian Poessinger
2020-03-24router-advert: T1831: new implementation using XML and PythonChristian Poessinger
2020-03-22wireless: T2151: calculate locally administered MAC address per SSIDChristian Poessinger
According to http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd every SSID served by access-point should run on its own, locally administered MAC address. Take the phy's interface MAC address as base and calculate a per interface locally administered MAC address.
2020-03-21Debian: Changelog: 1.3.0-17 for vyos-1x-vmware dependencyChristian Poessinger
2020-03-21Debian: vyos-1x-vmware needs a dependency on vyos-1xChristian Poessinger
2020-03-07pppoe: T1318: add ip-pre-up scriptChristian Poessinger
ppp already supports ip-pre-up script but none was being supplied. Need ip-pre-up to handle renames and firewall properly. Script imported from old VyOS PPP fork repository at https://github.com/vyos/ppp-debian
2020-03-01syslog: T2086: move sudo session open/close log entries to auth.logChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 17:38:53 +0000