summaryrefslogtreecommitdiff
path: root/interface-definitions/include/interface
AgeCommit message (Collapse)Author
2024-03-20bridge: T6125: support 802.1ad (ethertype 0x88a8) VLAN filteringChristian Breunig
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType value of 0x88A8 is required. Reusing CLI command from VIF-S (QinQ) interfaces: set interfaces bridge br0 protocol 802.1ad
2023-12-21dhcp: T5846: Ensure DUID regex range is boundIndrajit Raychaudhuri
The DUID regex was missing a lower bound, which could cause it not to match when it should. We have to specify the lower bound explicitly as 0 to keep the regex behavior similar to that in Python (in Python, omitting the lower bound is equivalent to specifying 0).
2023-12-21dhcp: T5846: Fix include pathIndrajit Raychaudhuri
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition.
2023-11-19dhcp-client: T5760: add CLI option to pass user-class parameterChristian Breunig
Example: set interfaces ethernet eth0 dhcp-options user-class VyOS or set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53
2023-11-19dhcp-client: T5760: add constraints for dhclient string optionsChristian Breunig
The string data type specifies either an NVT ASCII string enclosed in double quotes, or a series of octets specified in hexadecimal, separated by colons. For example: set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO or set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f As of now there was no input validation performed.
2023-08-31eapol: T4782: Support multiple CA chainssarthurdev
2023-08-25interface: T3509: Add per-interface IPv6 source validationsarthurdev
2023-08-23Merge pull request #2159 from c-po/t5491-wifiChristian Breunig
wifi: T5491: allow white-/blacklisting station MAC addresses for security
2023-08-23Merge pull request #2156 from giga1699/T5447Christian Breunig
T5447: Initial support for MACsec static keys
2023-08-20T5447: Implement maintainer feedbackGiga Murphy
2023-08-20wifi: T5491: allow white-/blacklisting station MAC addresses for securityChristian Breunig
Station MAC address-based authentication means: * 'allow' accept all clients except the one on the deny list * 'deny' accept only clients listed on the accept list New CLI commands: * set interfaces wireless wlan0 security station-address mode <accept|deny> * set interfaces wireless wlan0 security station-address accept mac <mac> * set interfaces wireless wlan0 security station-address deny mac <mac>
2023-08-17Merge pull request #2130 from aapostoliuk/T5409-sagittaChristian Breunig
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
2023-08-17wireguard: T5409: rename threaded CLI not to per-client-threadChristian Breunig
Using threaded as CLI node is a very deep term used by kernel threads. To make this more understandable to users, rename the node to per-client-thread. It's also not necessary to test if any one peer is configured and probing if the option is set. There is a base test which requires at least one peer to be configured.
2023-08-11ipv6: T5464: add support for per-interface dad (duplicate address detection) ↵Christian Breunig
setting
2023-08-11ipv6: T5464: use proper XML default for DAD transmitsChristian Breunig
This is only a cosmetic change so that the default value is properly retrieved from the defaultValue XML node.
2023-07-31dhcpv6-pd: T5387: add support for no-release flag1vivy
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit. vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP] * Todo: render Jinja2 template and fill it vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n dhcpv6-client: T5387: fix missing / from filepaths
2023-07-05geneve: T5339: add option to use ipv4 instead of ethernetfett0
2023-06-12T5286: drop XDP support for ethernet and bonding interfacesChristian Breunig
... this is a step towards a new and better implementation that will utilize VPP.
2023-06-03netns: xml: T3829: fix format stringChristian Breunig
2023-05-16T5226: Make host-name constraints to consistent everywhereIndrajit Raychaudhuri
Make host-name constraints consistent across all definitions
2023-04-01xml: include building block file name should end with .i and not .inChristian Breunig
2023-03-10container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry.
2023-03-09xml: T4952: improve interface completion helper CLI experienceChristian Breunig
2023-02-12pppoe: wwan: T4998: fix typo in constraintErrorMessageChristian Breunig
2023-02-12pppoe: wwan: T4998: fix username not accepting dot (.)Christian Breunig
This fixes a regressin introduced in commit e22e9c9210cb5 ("wwan: T3622: add constraint for username/password CLI nodes").
2023-02-10interfaces: T4995: rename user -> username CLI node for pppoe, wwan and ↵Christian Breunig
sstp-client
2023-02-09wwan: T3622: add constraint for username/password CLI nodesChristian Breunig
- Username is up to 128 alphanumerical characters, -, _, #, and @ - Password is limited to ASCII characters only, with a total lenght of 128
2023-01-07xml: T1579: merge generic-description.xml.i and interface/description.xml.iChristian Poessinger
No need to have two distinct include blocks as one superseeds the other. Also this makes the entire behavior of "description" CLI node simpler.
2023-01-01qos: T4284: first implementation introducing a new vyos.qos moduleChristian Poessinger
2022-12-14validators: T4875: use file-path to replace validator 'interface-name'John Estabrook
2022-12-11pppoe: xml: T4792: split "no-peer-dns" CLI node into building blockChristian Poessinger
2022-11-11policy: T2199: T4605: Migrate policy route interface to `policy route|route6 ↵sarthurdev
<name> interface <ifname>` * Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup * T4605: Rename mangle table to vyos_mangle
2022-09-25interfaces: T4709: raise minimum TCP MSS clamping valueinitramfs
This commit raises the minimum TCP MSS clamping range to the MSS value corresponding to the minimum packet size that must be accepted for IPv4.
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-08-01mtu: T4572: Add DHCP-option MTU to get values from DHCP-serverViacheslav Hletenko
Ability to get MTU from DHCP-server and don't touch it per any interface change if interface 'dhcp-options mtu' is configured
2022-07-09ip: T4517: add option to enable directed broadcast forwardingYuxiang Zhu
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644. By default Linux kernel doesn't forward directed broadcast packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding` and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
2022-07-01xml: include: add missing prefix in include file commentChristian Poessinger
2022-05-27dhcp6: pd: T4447: bugfix sla-id limits (must be greater then 128Christian Poessinger
The sla-id parameter of DHCPv6 prefix delegations is limited to 128. While this is enough to use all /64 subnets of a /57 prefix, with a /56 prefix that is no longer sufficient. Increased sla-id length tp 64535 so one could delegate an entire /48.
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2022-04-21xml: T4385: provide building blocks for default route configurationChristian Poessinger
2022-04-18vxlan: geneve: T4370: support configuration of DF bit optionChristian Poessinger
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit> set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
2022-04-16xml: include: improve don't fragment helpChristian Poessinger
2022-04-07qos: T4284: rename "traffic-policy" node to "qos policy"Christian Poessinger
"set traffic-policy" now becomes "set qos policy" "set interface ethernet eth0 traffic-policy" now bvecomes "set qos interface eth0"
2022-04-07qos: T4284: support mirror and redirect on vlan subinterfacesChristian Poessinger
2022-03-21qos: T4284: initial XML interface definitions for rewriteChristian Poessinger
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2022-02-20vxlan: T4120: rename tunnel-remotes.xml.i -> tunnel-remote-multi.xml.iChristian Poessinger
2022-02-20vxlan: T4120: add ability to set multiple remotes (PR #1127)Andreas
VXLAN does support using multiple remotes but VyOS does not. Add the ability to set multiple remotes and add their flood lists using "bridge" command.
2022-02-20static: T4203: obey interface dhcp default route distanceChristian Poessinger
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes") added a bug whenever a static route is modified - the DHCP interface will always end up with metric 210 - if there was a default route over a DHCP interface.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 08:40:46 +0000