Age | Commit message (Collapse) | Author |
|
firewall node
* Refactor firewall and zone-policy rule creation and cleanup
* Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>`
* Remove `firewall-interface.py` conf script
|
|
Ability to get MTU from DHCP-server and don't touch it per
any interface change if interface 'dhcp-options mtu' is
configured
|
|
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644.
By default Linux kernel doesn't forward directed broadcast
packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding`
and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
|
|
|
|
The sla-id parameter of DHCPv6 prefix delegations is limited to 128. While this
is enough to use all /64 subnets of a /57 prefix, with a /56 prefix that is no
longer sufficient.
Increased sla-id length tp 64535 so one could delegate an entire /48.
|
|
|
|
|
|
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit>
set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
|
|
|
|
"set traffic-policy" now becomes "set qos policy"
"set interface ethernet eth0 traffic-policy" now bvecomes "set qos interface eth0"
|
|
|
|
|
|
Since introducing the XML <defaultValue> node it was common, but redundant,
practice to also add a help string indicating which value would be used as
default if the node is unset.
This makes no sense b/c it's duplicated code/value/characters and prone to
error. The node.def scripts should be extended to automatically render the
appropriate default value into the CLI help string.
For e.g. SSH the current PoC renders:
$ cat templates-cfg/service/ssh/port/node.def
multi:
type: txt
help: Port for SSH service (default: 22)
val_help: u32:1-65535; Numeric IP port
...
Not all subsystems are already migrated to get_config_dict() and make use of
the defaults() call - those subsystems need to be migrated, first before the new
default is added to the CLI help.
|
|
|
|
VXLAN does support using multiple remotes but VyOS does not. Add the ability
to set multiple remotes and add their flood lists using "bridge" command.
|
|
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes")
added a bug whenever a static route is modified - the DHCP interface will
always end up with metric 210 - if there was a default route over a DHCP
interface.
|
|
|
|
* Migrates all policy route references from `ipv6-route` to `route6`
* Update test config `dialup-router-medium-vpn` to test migration of `ipv6-route` to `route6`
|
|
* 'firewall' of https://github.com/sarthurdev/vyos-1x:
zone_policy: T3873: Implement intra-zone-filtering
policy: T2199: Migrate policy route op-mode to XML/Python
policy: T2199: Migrate policy route to XML/Python
zone-policy: T2199: Migrate zone-policy op-mode to XML/Python
zone-policy: T2199: Migrate zone-policy to XML/Python
firewall: T2199: Migrate firewall op-mode to XML/Python
firewall: T2199: Migrate firewall to XML/Python
|
|
|
|
|
|
|
|
|
|
|
|
Both building blocks only differed in the help text, so use IP for both
IPv4 and IPv6.
|
|
level
Getting rid of "set firewall options" and move it from:
set firewall options interface ethX adjust-mss 1400
set firewall options interface ethX adjust-mss6 1400
to:
set interfaces ethernet ethX ip adjust-mss 1400
set interfaces ethernet ethX ipv6 adjust-mss 1400
In addition add an extra option called clamp-mss-to-pmtu instead of a value.
|
|
|
|
|
|
Some APNs require a username/password. Add CLI nodes (matching the PPPoE
syntax) for client authentication.
One APN would be the IPv4/IPv6 APN from Deutsche Telekom (Germany)
APN Name: Telekom Internet IPv6
APN: internet.v6.telekom
Benutzername: telekom
Passwort: tm
(cherry picked from commit c667a45a8fb06cb76c907348c4f1e3ec708b6e03)
|
|
|
|
|
|
|
|
The previously used regex allowed an address value of "dhcpfoo" which is invalid
and will raise an OSError. Harden the regex that it explicitly must be dhcp or
dhcpv6.
|
|
Sometimes a modem might give a local IP before it retrieves a WAN IP.
This can be an issue with failover routes,
since the default route will get overridden.
|
|
VyOS 1.2 (crux) rejected prefixes other then of site /64.
[ interfaces ethernet eth0 ipv6 address eui64 2006:ab00:abe1::2/127 ]
Error: Prefix lenght is 127. It must be 64.
Same should be done on VyOS 1.3 and newer
|
|
|
|
As the amount of include files now has reached a certain amount, it is getting
more and more crowsded, thuse introducing "per topic" subdirectories on the
filesystem to keep a clean structure makes sense.
|