| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Tunnel interface multicast settings can be "enabled or disabled". As we prefer
valueless nodes, and the linux kernel default is "disabled" we should add a
set interfaces tunnel tunXX enable-multicast
command
|
|
Not supported with swanctl
|
|
sstp-client
|
|
T4916: Rewrite IPsec peer authentication and psk migration
|
|
Rewrite strongswan IPsec authentication to reflect structure
from swanctl.conf
The most important change is that more than one local/remote ID in the
same auth entry should be allowed
replace: 'ipsec site-to-site peer <tag> authentication pre-shared-secret xxx'
=> 'ipsec authentication psk <tag> secret xxx'
set vpn ipsec authentication psk <tag> id '192.0.2.1'
set vpn ipsec authentication psk <tag> id '192.0.2.2'
set vpn ipsec authentication psk <tag> secret 'xxx'
set vpn ipsec site-to-site peer <tag> authentication local-id '192.0.2.1'
set vpn ipsec site-to-site peer <tag> authentication mode 'pre-shared-secret'
set vpn ipsec site-to-site peer <tag> authentication remote-id '192.0.2.2'
Add template filter for Jinja2 'generate_uuid4'
|
|
T4857: SNMP: Implement FRR SNMP Recomendations
|
|
warning message
|
|
* Move CLI from "system ntp" -> "service ntp"
* Drop NTP server option preempt as not supported by chrony
|
|
|
|
move from vfs to overlay driver
The following pre iage upgrade script must be executed to have containers after
the reboot:
for pod in $(cli-shell-api listActiveNodes container name); do
systemctl stop vyos-container-${pod//\'}.service
done
sed -i 's/vfs/overlay/g' /etc/containers/storage.conf /usr/share/vyos/templates/container/storage.conf.j2
rm -rf /usr/lib/live/mount/persistence/container/storage/libpod
for pod in $(cli-shell-api listActiveNodes container name); do
image=$(cli-shell-api returnActiveValue container name ${pod//\'} image)
podman image pull $image
systemctl start vyos-container-${pod//\'}.service
done
for dir in vfs vfs-containers vfs-images vfs-layers; do
rm -rf /usr/lib/live/mount/persistence/container/storage/$dir
done
|
|
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
|
|
so this new group can be used in inbound and outbound matcher
|
|
<name> interface <ifname>`
* Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup
* T4605: Rename mangle table to vyos_mangle
|
|
|
|
This is to refactor ISIS segment routing to match up with OSPF segment routing.
|
|
Changed CLI syntax in route-map set community,
set large-community, set extcommunity
Allows to add multiple communities, large-communities
and extcommunities in clear view.
Added new well-known communities.
Added non-transitive feature in extcommunities.
Fixed community's validators.
|
|
ids: T4557: Migrate threshold and add new threshold types
|
|
Migrate "service ids ddos-protection threshold xxx" to
"service ids ddos-protection general threshold xxx"
Add new threshold types:
set service ids ddos-protection threshold tcp xxx
set service ids ddos-protection threshold udp xxx
set service ids ddos-protection threshold icmp xxx
|
|
The initial Accel-PPP PPPoE implementation used:
set service pppoe-server interface <name> vlan-id <id>
set service pppoe-server interface <name> vlan-range <start-stop>
This is actually a duplicated CLI node.
|
|
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
|
|
Migration and Change boolean nodes "enable/disable" to
disable-xxxx, enable-xxxx and just xxx for VPN IPsec
configurations
- IKE changes:
- replace 'ipsec ike-group <tag> mobike disable'
=> 'ipsec ike-group <tag> disable-mobike'
- replace 'ipsec ike-group <tag> ikev2-reauth yes|no'
=> 'ipsec ike-group <tag> ikev2-reauth'
- ESP changes:
- replace 'ipsec esp-group <tag> compression enable'
=> 'ipsec esp-group <tag> compression'
- PEER changes:
- replace: 'peer <tag> id xxx'
=> 'peer <tag> local-id xxx'
- replace: 'peer <tag> force-encapsulation enable'
=> 'peer <tag> force-udp-encapsulation'
- add option: 'peer <tag> remote-address x.x.x.x'
Add 'peer <name> remote-address <name>' via migration script
|
|
firewall node
* Refactor firewall and zone-policy rule creation and cleanup
* Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>`
* Remove `firewall-interface.py` conf script
|
|
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
bgp: T4257: Changing BGP "local-as" to "system-as"
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
|
|
As we have specific configuration for each plugin:
set service monitoring telegraf xxx
- azure-data-explorer
- prometheus-client
- splunk
We should to move configuration that related to influxdb under
influxdb node
Replace:
set service monitoring telegraf
- authentication xxx
- bucket xxx
- port xxx
- url
To:
set service monitoring telegraf influxdb xxx
|
|
After discussion with @zsdc this was decided the better long term fix
* Removes hourly logrotate cron in favour of systemd timer override
|
|
|
|
|
|
|
|
present for DHCP
VyOS 1.4 still leverages PPPd internals on the CLI.
pppd supports three options for a default route, none, auto, force.
* none: No default route is installed on interface up
* auto: Default route is only installed if there is yet no default route
* force: overwrite any default route
There are several drawbacks in this design for VyOS and the users. If auto is
specified, this only counted for static default routes - but what about dynamic
ones? Same for force, only a static default route got replaced but dynamic ones
did not got taken into account.
The CLI is changed and we now re-use already existing nodes from the DHCP
interface configuration:
* no-default-route:
On link up no default route is installed, same as the previous
default-route none
* default-route-distance:
We can now specify the distance of this route for the routing table on the
system. This defaults to 210 as we have for DHCP interfaces. All this will be
migrated using a CLI migration script.
|
|
|
|
|
|
|
|
Add the include files containing the syntaxVersion element defining the
version of the respective component; these files are included by the top
level file 'xml-component-versions.xml.in'. Processing of these elements
was previously added to the python xml lib in commit 40f5359d. This will
replace the use of 'curver_DATA' in vyatta-cfg-system and other legacy
packages.
|
