| Age | Commit message (Collapse) | Author |
|---|
|
Wireless devices are subject to regulations issued by authorities. For any
given AP or router, there will most likely be no case where one wireless NIC is
located in one country and another wireless NIC in the same device is located
in another country, resulting in different regulatory domains to apply to the
same box.
Currently, wireless regulatory domains in VyOS need to be configured per-NIC:
set interfaces wireless wlan0 country-code us
This leads to several side-effects:
* When operating multiple WiFi NICs, they all can have different regulatory
domains configured which might offend legislation.
* Some NICs need additional entries to /etc/modprobe.d/cfg80211.conf to apply
regulatory domain settings, such as: "options cfg80211 ieee80211_regdom=US"
This is true for the Compex WLE600VX. This setting cannot be done
per-interface.
Migrate the first found wireless module country-code from the wireless
interface CLI to: "system wireless country-code"
(cherry picked from commit 9e22ab6b2aee48029d3455f65880e45c558cf1da)
|
|
(cherry picked from commit 663e468de2b431f771534b4e3a2d00a5924b98fe)
|
|
(cherry picked from commit e2b05343b30d2f989968532106e792cbaf75ecf6)
|
|
|
|
T3900: Add support for raw tables in firewall
|
|
timeout parameters defined in conntrack to firewall global-opton section.
|
|
|
|
>=5.0
random - In kernel 5.0 and newer this is the same as fully-random. In earlier
kernels the port mapping will be randomized using a seeded MD5 hash mix using
source and destination address and destination port.
https://git.netfilter.org/nftables/commit/?id=fbe27464dee4588d906492749251454
|
|
pppoe-server: T6234: PPPoE-server pado-delay refactoring
|
|
|
|
|
|
to firewall global-optinos
|
|
Containers have the ability to add Linux system capabilities to them, this is
done using the "set container name <name> cap-add" command.
The CLI node sounds off and rather should be "set container name <name>
capability" instead as we use and pass a capability to a container and not
add/invent new ones.
|
|
dhcp-server high-availability>.
|
|
|
|
T6029: Rewritten Accel-PPP services to an identical feature set
|
|
Removed dhcp-interface option (l2tp)
Added wins-server (sstp)
Added description (ipoe, pppoe, sstp, pptp)
Added exteded-script (l2tp, sstp, pptp)
Added shaper (ipoe, pptp, sstp, l2tp)
Added limits (ipoe, pptp, sstp, l2tp)
Added snmp ( ipoe, pptp,sstp, l2tp)
Refactoring and reformated code.
|
|
connected interfaces
Prior dhcpd behaviour implicitly handled requests for locally connected subnets. Kea requires an explicit link between subnets and an interface.
|
|
T5960: Rewritten authentication node in PPTP to a single view
|
|
Rewritten authentication node in accel-ppp services
to a single view. In particular - PPTP authentication.
|
|
|
|
T5971: Rewritten ppp options in accel-ppp services
|
|
ddclient: T5966: Adjust dynamic dns config address subpath
|
|
Denied using command 'route-target vpn export/import'
with 'both' together in bgp configuration.
|
|
Rewritten 'ppp-options' to the same view in all accel-ppp services.
Adding IPv6 support to PPTP.
|
|
|
|
|
|
T5865: Moved ipv6 pools to named ipv6 pools in accel-ppp
|
|
Renamed DPD action value from 'hold' to 'trap'
|
|
Moved ipv6 pools to named ipv6 pools in accel-ppp services
|
|
the lease file (#2796)
|
|
|
|
|
|
Shorten and simplify `system domain-search` config path from:
```
set system domain-search domain <domain1>
```
to:
```
set system domain-search <domain1>
```
This will shorten the path and also make consistent with `domain-search`
config in other places (like `dhcp-server`).
|
|
T5801: Rewritten L2TP to get_config_dict
|
|
dhcp: T3316: Support hostname, DUID and MAC address in reservation
|
|
|
|
|
|
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
|
|
|
|
accel-ppp: T5688: Standardized pool configuration in accel-ppp
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
|
|
|
|
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn
backend server.
https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests.
While debugging those failing, it was uncovered, that uvicorn only listens on
IPv4 connections
vyos@vyos# netstat -tulnp | grep 8080
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN -
As the CLI already has an option to move the API communication from an IP to a
UNIX domain socket, the best idea is to make this the default way of
communication, as we never directly talk to the API server but rather use the
NGINX reverse proxy.
|
|
IGMP and PIM are two different but related things.
FRR has both combined in pimd. As we use get_config_dict() and FRR reload it
is better to have both centrally stored under the same CLI node (as FRR does,
too) to just "fire and forget" the commit to the daemon.
"set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
|
|
<enable|disable> commands; log and state moved to new syntax.
|
|
change.
|
|
Time interval in seconds to wait between DNS updates would be a bit
more intuitive as `interval` than `timeout`.
|
