summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-21dhcp: T5846: Ensure DUID regex range is boundIndrajit Raychaudhuri
The DUID regex was missing a lower bound, which could cause it not to match when it should. We have to specify the lower bound explicitly as 0 to keep the regex behavior similar to that in Python (in Python, omitting the lower bound is equivalent to specifying 0). (cherry picked from commit 551f06218755076cde588c848c01ce5ca1bf5e6b)
2023-12-21dhcp: T5846: Fix include pathIndrajit Raychaudhuri
(cherry picked from commit 5768bc2d56cc8aabd8d276a2afc30608c1bc9838)
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition. (cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-15T5775: firewall: re-add state-policy to firewall. These commands are now ↵Nicolas Fort
included in <set firewall global-options state-policy> node.
2023-12-15firewall: T4502: add offload to firewall table actionsBjarke Istrup Pedersen
2023-12-13bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit (cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
2023-12-09git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication. (cherry picked from commit c30002208d392177cb1ffc1a5c714f7ad6d573b6)
2023-12-08Merge pull request #2581 from vyos/mergify/bp/sagitta/pr-2578Viacheslav Hletenko
T160: add NAT64 (backport #2578)
2023-12-07T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ``` (cherry picked from commit 336bb5a071b59264679be4f4f9bedbdecdbe2834)
2023-12-07nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net> (cherry picked from commit 7d49f7079f1129c2fadc7f38ceb230804d89e177) # Conflicts: # debian/control
2023-12-05ddclient: T5791: Migration script for dynamic dns config path changeIndrajit Raychaudhuri
2023-12-05ddclient: T5791: Remove XML includes that aren't used anymoreIndrajit Raychaudhuri
As followup to interface definition change, remove XML snippets that aren't used anymore. They were there because they were 'include'-ed multiple times in the interface definition `dynamic-dns.xml.in`. Since that's not the case anymore, they can be removed.
2023-12-01Merge pull request #2557 from vyos/mergify/bp/sagitta/pr-2467Christian Breunig
T5727: Use native URL validator instead of regex-based validator (backport #2467)
2023-12-01T5727: Use native URL validator instead of regex-based validatorIndrajit Raychaudhuri
Replace regex-based URL validator with native validator from vyos-utils. Also, move `include/url.xml.i` to `include/url-http-https.xml.i` to reflect the fact that it is used only for HTTP(S) URLs. (cherry picked from commit 64322b19d6968195a6dc7c82e7e22126072377f5)
2023-11-30ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Refactor zone configurationIndrajit Raychaudhuri
Refactor zone configuration to use shared XML snippet for all cases.
2023-11-30ddclient: T5612: Relax hostname validation for apex and wildcard entryIndrajit Raychaudhuri
Some porvides (like 'namecheap') allow to use '@' or '*' as hostname prefix for apex and wildcard records. This commit relaxes the hostname validation to allow these prefixes.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-22Merge pull request #2517 from nicolas-fort/T5419-FT-SagittaDaniil Baturin
T5419: firewall: backport firewall flowtable to Sagitta.
2023-11-22Merge pull request #2510 from vyos/mergify/bp/sagitta/pr-2506Daniil Baturin
dhcp-client: T5760: add CLI option to pass user-class parameter (backport #2506)
2023-11-21T5419: firewall: backport firewall flowtable to Sagitta.Nicolas Fort
2023-11-21Merge pull request #2512 from zdc/T5577-sagittaChristian Breunig
PAM: T5577: Backported PAM settings from circinus
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy. (cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
2023-11-20RADIUS: T5577: Added `mandatory` and `optional` modes for RADIUSzsdc
In CLI we can choose authentication logic: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-20dhcp-client: T5760: add CLI option to pass user-class parameterChristian Breunig
Example: set interfaces ethernet eth0 dhcp-options user-class VyOS or set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53 (cherry picked from commit 260645d0c6ff078cc89601f3a586195902f9c18e)
2023-11-20dhcp-client: T5760: add constraints for dhclient string optionsChristian Breunig
The string data type specifies either an NVT ASCII string enclosed in double quotes, or a series of octets specified in hexadecimal, separated by colons. For example: set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO or set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f As of now there was no input validation performed. (cherry picked from commit bed1cd01904ef89b5d31bd47de0f230214900f16)
2023-11-19Merge pull request #2498 from nicolas-fort/T4072-sagittaChristian Breunig
T4072: firewall: backport bridge firewall to sagitta
2023-11-16T4072: firewall: backport bridge firewall to sagittaNicolas Fort
2023-11-16xml: T5738: re-use "disable" building blockChristian Breunig
(cherry picked from commit 019723aaa4217403f1fcbcd636f573ea403f909c)
2023-11-15pim: T5733: incorporate feedback from peer reviewChristian Breunig
(cherry picked from commit 64b4cfc71d402222fd6b034336b3588b5986ba24)
2023-11-15pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c) # Conflicts: # data/templates/frr/pim6d.frr.j2 # interface-definitions/protocols-pim6.xml.in # smoketest/scripts/cli/test_protocols_pim6.py # src/conf_mode/protocols_pim6.py
2023-11-15pim: T5733: fix CLI level of global PIM commandsChristian Breunig
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-15pim: T5733: split out XML definitions to be re-used by pim6Christian Breunig
(cherry picked from commit c5e2c25f8968c0f06a9e4e992decc46a4f690868)
2023-11-15Merge pull request #2484 from vyos/mergify/bp/sagitta/pr-2479Christian Breunig
xml: T5738: add source-address-ipv4-ipv6-multi building block (backport #2479)
2023-11-14xml: T5738: add source-address-ipv4-ipv6-multi building blockChristian Breunig
(cherry picked from commit dccca4307339d13e5c3ae78058194baf2fd04002)
2023-11-14T5729: T5590: T5616: backport to sagita fwall marks, fix on firewall logs ↵Nicolas Fort
parsing, and migration to valueless node for log and state matchers
2023-11-06bgp: T5698: add support for EVPN MultihomingChristian Breunig
(cherry picked from commit 1d67620e656766731ad6825fd8961140eb50d8a7)
2023-11-03Merge pull request #2429 from vyos/mergify/bp/sagitta/pr-2423Viacheslav Hletenko
T4726: Remove accel-ppp RADIUS vendor validators (backport #2423)
2023-11-02T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessionsViacheslav Hletenko
Add `max-starting` option: [common] max-starting=N Specifies maximum concurrent session attempts which server may processed set service pppoe-server max-concurrent-sessions '30' Useful to prevent high CPU utilization and compat execution scripts per time. (cherry picked from commit 47645f9d0243ce48a473ab7f8cdbd22c19f69f28)
2023-11-02T4726: Remove accel-ppp RADIUS vendor validatorsViacheslav Hletenko
The vendor name could contain Uppercase or lowercase symbols and not rely on the dictionary name but on dictionary value / # cat /usr/share/freeradius/dictionary.cisco | grep -i vendor VENDOR Cisco 9 Another example VENDOR Alcatel-IPD 6527 This way if we use `vendor=cisco` instead of `vendor=Cisco` it will not work at all Delete vendor validators (cherry picked from commit bbc7cabc6be0d5f8629724e9b0025e425168e1a8)
2023-11-01T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher ↵Nicolas Fort
firewal, nat and nat66. (cherry picked from commit 51abbc0f1b2ccf4785cf7f29f1fe6f4af6007ee6)
2023-10-23T5637: Firewall: add new rule at the end of base chains for default-actions. ↵Nicolas Fort
This enables logs capabilities for default-action in base chains.
2023-10-22Merge branch 'sagitta' into mergify/bp/sagitta/pr-2386Christian Breunig
2023-10-22bonding: T5254: Fixed changing ethernet when it is a bond memberaapostoliuk
If ethernet interface is a bond memeber: 1. Allow for changing only specific parameters which are specified in EthernetIf.get_bond_member_allowed_options function. 2. Added inheritable parameters from bond interface to ethernet interface which are scpecified in BondIf.get_inherit_bond_options. Users can change inheritable options under ethernet interface but in commit it will be copied from bond interface. 3. All other parameters are denied for changing. Added migration script. It deletes all denied parameters under ethernet interface if it is a bond member. (cherry picked from commit aa0282ceb379df1ab3cc93e4bd019134d37f0d89)
2023-10-22vxlan: T5671: change port to IANA assigned default portChristian Breunig
Currently VyOS VXLAN implementation uses the Linux assigned port 8472 that predates the IANA assignment. As Most other vendors use the IANA assigned port, follow this guideline and use the new default port 4789. Existing configuration not defining an explicit port number will be migrated to the old default port number of 8472, keeping existing configurations work! (cherry picked from commit 6db8d3ded19f652b99231be0d705d76b598ac72a) # Conflicts: # interface-definitions/include/version/interfaces-version.xml.i
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 07:22:47 +0000