| Age | Commit message (Collapse) | Author |
|---|
|
since it's not supported.
(cherry picked from commit 9d490ecf616eb9d019beee37a3802705c4109d9d)
|
|
(cherry picked from commit f2c6cb62521bf13a51225462e8d39ee184645de1)
|
|
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254>
* set protocols bfd profile <name> minimum-ttl <1-254>
(cherry picked from commit 1f07dcbddfcfdbb9079936ec479c5633934dd547)
|
|
QoS policy shaper-hfsc was not implemented after rewriting the
traffic-policy to qos policy. We had CLI but it does not use the
correct class. Add a basic implementation of policy shaper-hfsc.
Write the class `TrafficShaperHFS`
(cherry picked from commit f6b6ee636e34f98d336ee53599666afd1f395d78)
|
|
This is a combined backport for all accumulated changes done to the firewall
subsystem on the current branch.
|
|
Backport of the conntrack system from current branch.
(cherry picked from commit fd0bcaf12)
(cherry picked from commit 5acf5aced)
(cherry picked from commit 42ff4d8a7)
(cherry picked from commit 24a1a7059)
|
|
Renamed DPD action value from 'hold' to 'trap'
(cherry picked from commit 9f4aee5778eefa0a17d4795430d50e4a046e88b0)
|
|
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address>
set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
(cherry picked from commit 7349927908206fa83a7295d643f56950309efb4f)
|
|
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575>
set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
(cherry picked from commit d7e248ba514108461ca9d5875c0be077c80ceca7)
|
|
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp (backport #2777)
|
|
interface: T5550: Interface source-validation priority over global value (backport)
|
|
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp
services.
Added completionHelp to default-pool and next-pool.
Fixed verification in vpn l2tp config script.
(cherry picked from commit 4ffec67d04670192d9b722353cbaef04cb0ba129)
|
|
(cherry picked from commit f1411240c6b11ec400ac0f66eb71982259204317)
|
|
T5530: isis: Adding loop free alternate feature (backport #2263)
|
|
(cherry picked from commit 7a2b70bd73c8579a885348b93b8addfb20fb006c)
|
|
We have not seen the adoption of the https virtual-host CLI option.
What it did?
* Create multiple webservers each listening on a different IP/port
(but in the same VRF)
* All webservers shared one common document root
* All webservers shared the same SSL certificates
* All webservers could have had individual allow-client configurations
* API could be enabled for a particular virtual-host but was always enabled on
the default host
This configuration tried to provide a full webserver via the CLI but VyOS is a
router and the Webserver is there for an API or to serve files for a local-ui.
Changes
Remove support for virtual-hosts as it's an incomplete and thus mostly useless
"thing". Migrate all allow-client statements to one top-level allow statement.
(cherry picked from commit d0d3071e99eb65edb888c26ef2fdc9e038438887)
|
|
(cherry picked from commit 9ab6665c80c30bf446d94620fc9d85b052d48072)
|
|
The "idea" of this PR is to add new CLI nodes under the pki subsystem to
activate ACME for any given certificate.
vyos@vyos# set pki certificate NAME acme
Possible completions:
+ domain-name Domain Name
email Email address to associate with certificate
listen-address Local IPv4 addresses to listen on
rsa-key-size Size of the RSA key (default: 2048)
url Remote URL (default:
https://acme-v02.api.letsencrypt.org/directory)
Users choose if the CLI based custom certificates are used
set pki certificate EXAMPLE acme certificate <base64>
or if it should be generated via ACME.
The ACME server URL defaults to LetsEncrypt but can be changed to their staging
API for testing to not get blacklisted.
set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory
Certificate retrieval has a certbot --dry-run stage in verify() to see if it
can be generated.
After successful generation, the certificate is stored in under
/config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set
interfaces ethernet eth0 eapol certificate EXAMPLE) we call
vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the
base64 encoded certificate into the JSON data structure normally used when
using a certificate set by the CLI.
Using this "design" does not need any change to any other code referencing the
PKI system, as the base64 encoded certificate is already there.
certbot renewal will call the PKI python script to trigger dependency updates.
(cherry picked from commit b8db1a9d7baf91b70c1b735e58710f1e2bc9fc7a)
# Conflicts:
# debian/control
|
|
|
|
underscore and dot
(cherry picked from commit 82b4b2db8fda51df172210f470e5825b91e81de4)
|
|
Backports for Accel-PPP based serviced T5801, T5842 and T5688
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
(cherry picked from commit 09e0a2ca035ee39a68a510b28cc74560669d0420)
|
|
interfaces
Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can
not be used as source-interface for e.g. a tunnel.
The main reason is that these are dynamic interfaces which come and go from a
kernel point of view, thus it's not possible to bind an interface to them.
(cherry picked from commit 5062f5d313548d6ebb9c07fee6b6d6be25b8f8f0)
|
|
`include/firewall/rule-log-options.xml.i` is now more aptly renamed to
`include/firewall/log-options.xml.i`.
(cherry picked from commit 53a48f499ae9bcc2f657136bb7779b38aad1c242)
|
|
This file is a left over from previous refactoring and no longer
referenced anywhere in the interface definitions.
(cherry picked from commit f8f382b2195da8db8b730f107ffba16e67dac822)
|
|
(cherry picked from commit 7c40b70af9def9242b30d1fc949288d9da2bd027)
|
|
Rename chain level defaults log option from `enable-default-log` to
`default-log` for consistency.
(cherry picked from commit 245e758aa2ea8779186d0c92d79d33170d036992)
|
|
Shorten and simplify `system domain-search` config path from:
```
set system domain-search domain <domain1>
```
to:
```
set system domain-search <domain1>
```
This will shorten the path and also make consistent with `domain-search`
config in other places (like `dhcp-server`).
(cherry picked from commit f77bf573c608b6c09182e1bad4312c4dd1e5195e)
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
(cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
|
|
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
(cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
(cherry picked from commit 551f06218755076cde588c848c01ce5ca1bf5e6b)
|
|
(cherry picked from commit 5768bc2d56cc8aabd8d276a2afc30608c1bc9838)
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
(cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
(cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
(cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
|
|
included in <set firewall global-options state-policy> node.
|
|
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
(cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
|
|
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json`
for improved developer experience.
The `.gitattrbutes` settings are based on:
Git documentation (https://git-scm.com/docs/gitattributes#_effects)
GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings)
Community templates (https://github.com/gitattributes/gitattributes)
Since editor-agnostic line-ending specific settings are applied to
`.gitattributes`, they can be removed from `.vscode/settings.json`.
The global VSCode defaults have also been removed to avoid duplication.
(cherry picked from commit c30002208d392177cb1ffc1a5c714f7ad6d573b6)
|
|
T160: add NAT64 (backport #2578)
|
|
- Update the base (rebase)
- Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i
- Delete unwanted `write_json`, use `write_file` instead
- Remove unnecessary deleting of default values for tagNodes T2665
- Add smoketest
Example:
```
set interfaces ethernet eth0 address '192.168.122.14/24'
set interfaces ethernet eth0 address '192.168.122.10/24'
set interfaces ethernet eth2 address '2001:db8::1/64'
set nat64 source rule 100 source prefix '64:ff9b::/96'
set nat64 source rule 100 translation pool 10 address '192.168.122.10'
set nat64 source rule 100 translation pool 10 port '1-65535'
```
(cherry picked from commit 336bb5a071b59264679be4f4f9bedbdecdbe2834)
|
|
Signed-off-by: Joe Groocock <me@frebib.net>
(cherry picked from commit 7d49f7079f1129c2fadc7f38ceb230804d89e177)
# Conflicts:
# debian/control
|
|
|
|
As followup to interface definition change, remove XML snippets that
aren't used anymore. They were there because they were 'include'-ed
multiple times in the interface definition `dynamic-dns.xml.in`. Since
that's not the case anymore, they can be removed.
|
|
T5727: Use native URL validator instead of regex-based validator (backport #2467)
|
|
Replace regex-based URL validator with native validator from vyos-utils.
Also, move `include/url.xml.i` to `include/url-http-https.xml.i` to
reflect the fact that it is used only for HTTP(S) URLs.
(cherry picked from commit 64322b19d6968195a6dc7c82e7e22126072377f5)
|
|
Time interval in seconds to wait between DNS updates would be a bit
more intuitive as `interval` than `timeout`.
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
Refactor zone configuration to use shared XML snippet for all cases.
|
