Age | Commit message (Collapse) | Author |
|
set vpn openconnect network-settings split-dns <domain>
(cherry picked from commit e41685a2f56cca0a53b4f8c084f61a85cf561c80)
|
|
(cherry picked from commit 393355f7feaa921eba46b83d4f15ad4a5c37adab)
|
|
Ability to get MTU from DHCP-server and don't touch it per
any interface change if interface 'dhcp-options mtu' is
configured
(cherry picked from commit 29b0ee30bf2622a40ca3d17e3f6b9e94e5b62072)
|
|
snmp: T2763: Add protocol TCP for service SNMP
|
|
equuleus: Bond and Bridge interface fixes + new smoketests
|
|
Linux Kernel supports to specify the MII link monitoring frequency in
milliseconds. This determines how often the link state of each slave is
inspected for link failures. A value of zero disables MII link monitoring.
A value of 100 is a good starting point.
The default value is 100.
set interfaces bonding bond0 mii-mon-interval <n>
(cherry picked from commit 4315c8fa5bb090e2b7edd6bda205041623e2511d)
|
|
Ability to listen TCP port for service SNMP
set service snmp protocol tcp
|
|
webproxy: T4468: Fix regex for squidguard source-group 1.3
|
|
accel-ppp: T4373: T4507: Add options multiplier for shaper
|
|
ntp: T4456: support listening on specified interface (equuleus)
|
|
dns: T4509: Add dns64-prefix option (equuleus)
|
|
rfc6147: DNS Extensions for Network Address Translation
from IPv6 Clients to IPv4 Servers
set service dns forwarding dns64-prefix 2001:db8:aabb::/96
(cherry picked from commit 2bdf4798570222b57af2de2f0b443529abdc3feb)
|
|
Add rate-limit options: attribute, muptiplier and vendor
set service ipoe-server auth radius rate-limit attribute 'Mikrotik-Rate-Limit'
set service ipoe-server auth radius rate-limit enable
set service ipoe-server auth radius rate-limit multiplier '0.001'
set service ipoe-server auth radius rate-limit vendor 'Miktorik'
|
|
Multiplier option is required by some vendors for correct shaping
For RADIUS based rate-limits
edit service pppoe-server
set authentication radius rate-limit multiplier '0.001'
|
|
(cherry picked from commit b1db3de80b8b5f4e2dcbc6d687d342986345c4b2)
|
|
When clients only use DHCP for interface addressing we can not bind NTPd to
an address - as it will fail if the address changes. This commit adds support
to bind ntpd to a given interface in addition to a given address.
set system ntp interface <name>
(cherry picked from commit 6732df1edd632b56d3d02970939f51d05d4262e9)
|
|
Fix wrong behavior with priority by using tunnel interfaces
MPLS configuration must be applied after tunnel interfaces
as we use an addition sysctl option 'net.mpls.conf.tun0.input = 1'
which doesn't exist without a tunnel interface
Change priority:
299 protocols/mpls
380 interfaces/tunnel
To:
380 interfaces/tunnel
400 protocols/mpls
|
|
(cherry picked from commit fbd3bef2248de5785f96d2e7803a6811eee78710)
|
|
ipoe: T2580: Add pools and gateway options
|
|
The sla-id parameter of DHCPv6 prefix delegations is limited to 128. While this
is enough to use all /64 subnets of a /57 prefix, with a /56 prefix that is no
longer sufficient.
Increased sla-id length tp 65535 so one could delegate an entire /48.
(cherry picked from commit 283276d457a09c100416c0d4ffccd4f94ccd2540)
|
|
Add new feature to allow to use named pools
Can be used also with Radius attribute 'Framed-Pool'
set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
Add output Plugin "prometheus-client" for telegraf
set service monitoring telegraf prometheus-client xxx
|
|
(cherry picked from commit 0b466f7a54cfedaf53edec5f3d58676113ece391)
|
|
T4324, T4338, T4339 WWAN interface bugfixes
|
|
(cherry picked from commit a6c936997611de85dc73152297679d0b53095713)
|
|
(cherry picked from commit 175b0a082808955adba811f18424a126e798dd32)
|
|
(cherry picked from commit 671abc96ac607226e208ac94b87a33851c144945)
|
|
support"
|
|
(cherry picked from commit eaf4b60c9e7fa094d17b87b29bebaf81182ee7a1)
|
|
(cherry picked from commit 87ccafd06b897b63f847e6b47cf72b951b0ed223)
|
|
backport: T4515: T4219: policy local-route6 and inbound-interface support
|
|
After hardning the regex validator to be preceeded with ^ and ending with $
it was no longer possible to have a comma separated list as SSH ciphers. The
migrations cript is altered to migrate the previous comma separated list
to individual multi node entries - cipher and key-exchange always had been
multinodes - so this just re-arranges some values and does not break CLI
compatibility
(cherry picked from commit 61fa1c95164e4222e79b078b1a796f41397e0ee3)
|
|
(cherry picked from commit 0ec8927476e7d654d52df4c803a6694be0b1e9e2)
|
|
(cherry picked from commit be60d39332b753f5fe35101efe3463eebea2cb9d)
|
|
(cherry picked from commit faa63999ca1fe11cc25e8a241e75a451a53ffa26)
|
|
|
|
Adds support for `ip -6 rule` policy based routing.
Also, extends the existing ipv4 implemenation with a
`destination` key, which is translated as
`ip rule add to x.x.x.x/x` rules.
https://phabricator.vyos.net/T4151
|
|
|
|
This reverts commit e11a7ff1b2817cc8f4b595171fe82a43a209ebc2.
|
|
This reverts commit 72d7152f794cfe48821797d62865024c1843096e.
|
|
(cherry picked from commit d418cd36027aef5993122ec62419e8c66fe7a1ed)
|
|
VXLAN does support using multiple remotes but VyOS does not. Add the ability
to set multiple remotes and add their flood lists using "bridge" command.
(cherry picked from commit 0ecddff7cffa8900d351d5c15e32420f9d780c0b)
|
|
(cherry picked from commit 529af7898d062b42ac33e15bfdc62c14184e098f)
|
|
backport: T4515: T4219: policy local-route6 and inbound-interface support
|
|
|
|
Ability to set virtual_address on not vrrp-listen interface
Add ability don't track primary vrrp interface "exclude-vrrp-interface"
Add ability to set tracking (state UP/Down) on desired interfaces
For example eth0 is used for vrrp and we want to track another eth1
interface that not belong to any vrrp-group
set high-avail vrrp group WAN interface 'eth0'
set high-avail vrrp group WAN virtual-address 192.0.2.222/24 interface 'eth2'
set high-avail vrrp group WAN track exclude-vrrp-interface
set high-avail vrrp group WAN track interface 'eth1'
|
|
Adds support for `ip -6 rule` policy based routing.
Also, extends the existing ipv4 implemenation with a
`destination` key, which is translated as
`ip rule add to x.x.x.x/x` rules.
https://phabricator.vyos.net/T4151
|
|
(cherry picked from commit d96bab4e6da517f07133667834cd6f8bcfb5160f)
|
|
|
|
There is spelling mistake in "advertisement" of hello-time option's
completion help
(cherry picked from commit b10baca3c8663e7e56eb9abfb3c03ce576c34f1f)
|