summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2024-04-05conntrack-sync: T1244: Change name for option startup-resyncNataliia Solomko
2024-04-05conntrack-sync: T1244: Support for StartupResync in conntrackdNataliia Solomko
2024-03-26T6150: Fixed setting a static IP address by Radius in IPoEaapostoliuk
Fixed setting a static IP address by Radius in IPoE Allowing using named pools by default Allowed adding 'gateway-address' without named pool.
2024-03-14Merge pull request #3121 from natali-rs1985/T2998-equuleusDaniil Baturin
snmp: T2998: SNMP v3 oid "exclude" option fix
2024-03-13vrrp: T5504: Keepalived VRRP ability to set more than one peer-addressNataliia Solomko
2024-03-11snmp: T2998: SNMP v3 oid "exclude" option fixNataliia Solomko
2024-03-07conntrack-sync: T6057: Add ability to disable syslog for conntrackdNataliia Solomko
2024-02-16T5418: PPPoE allowed creating subnet started from any IPaapostoliuk
Added the possibility of creating subnet in PPPoE client's IP pools started from any IP.
2024-02-13rpki: T6004: add missing startup priorityChristian Breunig
(cherry picked from commit 4c2acb970c62478cf1139fcf66b0de341d46f7fc)
2024-02-01bfd: T5967: add minimum-ttl optionChristian Breunig
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254> (partially cherry-picked from 1f07dcbddfcfdbb9079936ec479c5633934dd547)
2024-01-09T1297: vrrp: backport VRRP GARP options to EquuleusNicolas Fort
2023-12-28ddclient: T5852: add missing priorityChristian Breunig
Running ddclient on a VLAN interface will fail during reboot as there is no discrete priority to tell that the dynamic DNS service needs to be started after the interfaces. (cherry picked from commit ef237a7555843226e9bf48e552ed5feb5df581f4)
2023-12-15 T5796:add command http-security-headersfett0
2023-11-23pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value. (cherry picked from commit ffd7339e2ea3eafdd97ac0763ca4a3913fe71bf3)
2023-11-20PAM: T5577: Optimized RADIUS PAM configzsdc
- Added system `radius` group - Added `mandatory` and `optional` modes for RADIUS - Improved PAM config for RADIUS New modes: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-11-06Merge pull request #2348 from c-po/t4269-cli-defaults-backportChristian Breunig
scripts: T4269: node.def generator should automatically add default values (backport)
2023-10-31bridge: T5670: add missing constraint on "member interface" nodeRobert Göhler
correct include filename extension
2023-10-31Merge pull request #2310 from sever-sever/T5586-eqDaniil Baturin
T5586: Disable by default SNMP for Keeplived VRRP service
2023-10-25bridge: T5670: add missing constraint on "member interface" nodeChristian Breunig
One could specify a bridge member of VXLAN1 interface, but it is not possible to create a VXLAN interface with the name of VXLAN1 - prohibited by VXLAN interface name validator. Add missing interface-name validator code (cherry picked from commit 45dc149e4e3c0c294deac6fd541bb027d2280ea1) (cherry picked from commit e619b23b8889543465b61eb00d5b0d3c8063ae95)
2023-10-08Merge pull request #2333 from sever-sever/T5213-eq1.3.4Daniil Baturin
T5213: Add accounting-interim-interval option for PPPoE-server
2023-10-08scripts: T4269: node.def generator should automatically add default valuesChristian Breunig
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help. (cherry picked from commit a68c9238111c6caee78bb28f8054b8f0cfa0e374)
2023-10-08pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280 (cherry picked from commit e062a8c11856f213983f5b41f50d4f9dbc0dde0f)
2023-10-03T5213: Add accounting-interim-interval option for PPPoE-serverViacheslav Hletenko
Add accounting-interim-interval option for PPPoE-server set service pppoe-server authentication radius accounting-interim-interval '60'
2023-09-26T5586: Disable by default SNMP for Keeplived VRRP serviceViacheslav Hletenko
AgentX does not work stable. From time to time we see the system service crashing/degrading if something is wrong with SNMP from util net-snmp. We should disable it by default and enable it only if configured. set high-availability vrrp snmp
2023-09-01container: T4353: capitalize ascii -> ASCIIChristian Breunig
(cherry picked from commit 8daf7f95d832550cc31ab22a65aabe969ecae813)
2023-09-01container: T578: fix XML build warning about 'Christian Breunig
2023-08-28T5428: fix DHCP address renewal/release when running in VRFChristian Breunig
2023-08-31Merge pull request #2181 from sever-sever/T738-eqChristian Breunig
T738: add CLI option for PowerDNS local-port
2023-08-31Merge pull request #2168 from sever-sever/T3546Christian Breunig
T3546: PPPoE-server add extended scripts for RADIUS attributes
2023-08-29T738: add CLI option for PowerDNS local-portViacheslav Hletenko
set service dns forwarding allow-from '192.0.2.0/24' set service dns forwarding listen-address '192.0.2.11' set service dns forwarding port '5353'
2023-08-25T4825: Add interface type vethViacheslav Hletenko
Add interface type veth (Virtual ethernet) One of the usecases it's interconnect different vrf's and default vrf via bridge set interfaces virtual-ethernet veth0 peer-name 'veth1010' set interfaces virtual-ethernet veth1010 address '10.0.0.10/24' set interfaces virtual-ethernet veth1010 peer-name 'veth0' set interfaces virtual-ethernet veth1010 vrf 'foo' set interfaces bridge br0 address '10.0.0.1/24' set interfaces bridge br0 member interface veth0 vyos@r1:~$ ping 10.0.0.10 count 1 PING 10.0.0.10 (10.0.0.10) 56(84) bytes of data. 64 bytes from 10.0.0.10: icmp_seq=1 ttl=64 time=0.082 ms
2023-08-25T3546: PPPoE-server add extended scripts for RADIUS attributesViacheslav Hletenko
Ability to get and parse RADIUS attributes via a shell script and then execute commands Ane of the usecases is to create a custom shaper with some smart Extended scripts receive from PPPoE daemon the following variables: $1 - Interface name $4 - Tunnel GW IP address $5 - Delegated IP address to the client $6 - Calling Station ID (MAC) if [ -f /run/accel-pppd/radattr.$1 ]; then true fi
2023-08-01T5329 : priority: tunnel config is committed before wireguardsrividya0208
(cherry picked from commit 3d5aba0775ff0d858d6c75d6aa37183be73c15aa)
2023-07-19sshguard: T5354: Add service ssh dynamic-protectionViacheslav Hletenko
Sshguard protects hosts from brute-force attacks It can inspect logs and block "bad" addresses by threshold Auto-generates own tables and rules for nftables, so they are not intercept with VyOS firewall rules. When service stops, all generated tables are deleted. set service ssh dynamic-protection set service ssh dynamic-protection allow-from '192.0.2.1' set service ssh dynamic-protection block-time '120' set service ssh dynamic-protection detect-time '1800' set service ssh dynamic-protection threshold '30'
2023-06-26vrrp: T5315: fix completion helperChristian Breunig
(cherry picked from commit 90c0c2c4c81cdbf2ec3f928499f3e1719bfd6f9a)
2023-06-26vrrp: T5315: add support to explicitly specify versionChristian Breunig
set high-availability vrrp group <name> version 2|3 (cherry picked from commit 6ca308182a7891e600a2e8749f7b12b566005576)
2023-05-11syslog: T2769: add VRF supportChristian Breunig
Allow syslog messages to be sent through a VRF (e.g. management). (cherry picked from commit 46d2bcdb0b500b4d1b9d973ab5b9ca3c6cf44e51)
2023-04-13Merge pull request #1952 from sever-sever/T4727Christian Breunig
T4727: Add RADIUS rate-limit attribute for vpn pptp
2023-04-11T4727: Add RADIUS rate-limit attribute for vpn pptpViacheslav Hletenko
Add rate-limit attribute, multiplier, vendor specific attribute for the [shaper] section
2023-04-11 T4939: backport VRRP startup delayfett0
2023-04-01container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry. (cherry picked from commit fe82d86d3e87cb8d92ebc9d0652c08e3dd79a12c)
2023-03-15T3083: Add service event-handlerViacheslav Hletenko
Event-handler allows executing a custom script when detects some configured "pattern regex" set service event-handler event first filter pattern '.*ssh2.*' set service event-handler event first script arguments '192.0.2.5' set service event-handler event first script environment interface value 'eth0' set service event-handler event first script path '/config/scripts/hello.sh' It is the backport from 1.4
2023-03-01T4967: xml: provide re-usable constraint for CLI host-name definitionsChristian Breunig
(cherry picked from commit d14a6814acb173cdc6df13212620f7da330434ed)
2023-03-01T4967: Allow setting container hostnameViacheslav Hletenko
Ability setting container hostname This host name is used as /etc/hostname set container name <tag> host-name 'mybox' (cherry picked from commit c68d73e6720a7df2b48df17ac7b9b4c906e0294c)
2023-03-01container: T4014: Add `command`, `arg` and `entrypoint` configuration ↵Zen3515
options for containers (cherry picked from commit 53aebddb4ca54b0cc4a296d6cc4c4d960c5f1d73)
2023-02-24macsec: T5008: Changed length of CKN to (2..64 hex-digits)aapostoliuk
Based on wpa_supplicant documentation. mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string (2..64 hex-digits) Changed allowable length of CKN from strong 64 hex-digits to the range (2..64 hex-digits)
2023-02-13Merge pull request #1813 from sever-sever/T4971-eqChristian Breunig
T4971: PPPoE server add named ip pool and attr Framed-Pool
2023-02-13Merge pull request #1812 from sever-sever/T1993-eqDaniil Baturin
T1993: PPPoE-server add section shaper and fwmark option
2023-02-12T4971: PPPoE server add named ip pool and attr Framed-PoolViacheslav Hletenko
Add a new feature to allow to use named pools Also it can be used with RADIUS attribute 'Framed-Pool' set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2023-02-12T4971: Add accel-ppp include client-ip-pool-nameViacheslav Hletenko
Add accel-ppp include client-ip-pool-name.xml.i Can be used in other accep-ppp CLI as "include"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 23:11:57 +0000