summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2019-06-28[IPoE] config structure improvedhagbard
* fixed minor issues * fixed lower function for mac addresses if user capitalized it (local mode only) * added some checks to verify() * cli ip-address checks on input
2019-06-27[IPoE] T989 - IPoE implementationhagbard
* chap-secrets file generation * noauth in accel config as option * local auth with csid implemented * radius implementation * shaper per user implemented * op comands for stats
2019-06-22bfd: T1183: move "multiplier" configuration node to "interval multiplier"Christian Poessinger
2019-06-22bfd: T1183: add rx/tx interval configurationChristian Poessinger
vyos@vyos# show protocols bfd { peer 1.1.1.1 { interval { receive 400 transmit 300 } } }
2019-06-22bfd: T1183: add support to configure detection multiplierChristian Poessinger
Configures the detection multiplier to determine packet loss. The remote transmission interval will be multiplied by this value to determine the connection loss detection timer. The default value is 3. Example: when the local system has detect-multiplier 3 and the remote system has transmission interval 300, the local system will detect failures only after 900 milliseconds without receiving packets.
2019-06-22bfd: T1183: adjust CLI syntax for source address/interfaceChristian Poessinger
Place address/interface under new source node. vyis@vyos# show protocols bfd peer 1.1.1.1 { source { address 1.2.3.4 interface eth0.201 } }
2019-06-22bfd: T1183: add support for multihopChristian Poessinger
multihop tells the BFD daemon that we should expect packets with TTL less than 254 (because it will take more than one hop) and to listen on the multihop port (4784). When using multi-hop mode echo-mode will not work (see RFC 5883 section 3).
2019-06-22bfd: T1183: initial CLI implementationChristian Poessinger
vyos@vyos# show protocols bfd peer 172.18.202.10 { local-address 172.18.201.10 local-interface eth0.201 shutdown } peer 172.18.202.12 { shutdown }
2019-06-19[wireguard] T1425 - assign a /31 address on Wireguard interfacehagbard
- added a validator for checking if the address is any cidr noted address
2019-06-18[pppoe-server] T1452 - add vendor option to shaperhagbard
2019-06-16T1439: remove beginning and end anchors, they are implied with re.fullmatchJernej Jakob
2019-06-16T1439: move DUID validator to regexJernej Jakob
2019-06-16T1439: add dhcpv6-client-id validatorJernej Jakob
2019-06-16dhcpv6-server: Add name constraint, clarify help, fix typosJernej Jakob
2019-04-26[pppoe-server] adding CIDR based prefixes as client-ip-pool optionhagbard
2019-04-23[pppoe-server] - fixed default RADIUS attribute Filter-Idhagbard
2019-04-21[firewall] T314: add firewall options for MSS clampingChristian Poessinger
* clamp MSS IPv4 set firewall options interface pppoe0 adjust-mss '1452' * clamp MSS IPv6 set firewall options interface pppoe0 adjust-mss6 '1452' * disable entire rule set firewall options interface pppoe0 disable Output ------ $ sudo iptables-save -t mangle # Generated by iptables-save v1.4.21 on Sun Apr 21 12:56:25 2019 *mangle :PREROUTING ACCEPT [1217:439885] :INPUT ACCEPT [290:52459] :FORWARD ACCEPT [920:375774] :OUTPUT ACCEPT [301:100053] :POSTROUTING ACCEPT [1221:475827] :VYOS_FW_OPTIONS - [0:0] -A FORWARD -j VYOS_FW_OPTIONS -A VYOS_FW_OPTIONS -o pppoe0 -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss 1452 COMMIT Completed on Sun Apr 21 12:56:25 2019 (cherry picked from commit 476aa4c3a561ea0ef0bf9b4c26ec8b78d18a5d02)
2019-04-20Revert "[hostname] T1336: trailing dots in system domain-name are invalid"Christian Poessinger
This reverts commit 05c539ea5595790b297904569cbe13089ce79e18.
2019-04-20[hostname] T1336: trailing dots in system domain-name are invalidChristian Poessinger
Debian/Systemd provides hostnamectl which disabllows setting a FQDN when there is a trailing (.) in the provided hostname. Extend regex when setting "system domain-name" that there can't be a trailing (.). Provide migration script for current installations to remove the dot.
2019-04-18[pppoe-server] - typo correctedhagbard
2019-04-18[pppoe-server] T1341 - Adding rate-limiter for pppoe server usershagbard
- RADIUS shaper settings
2019-04-18[pppoe-server] T1341 - Adding rate-limiter for pppoe server usershagbard
- implementation for locally definied users
2019-04-03[dhcpv6-relay] T1322: support multiple upstream serversChristian Poessinger
Add support for relaying a DHCPv6 packet to multiple servers on one upstream interface.
2019-03-11[arp] - T1288: python implemtation of 'set protocols static arp'hagbard
2019-03-08T103: [dhcp-server] add support to configure host declarative namesChristian Poessinger
2019-03-07[rsyslog] T1282 - Configure VyOS to send syslog messages to remote syslog ↵hagbard
using fully-qualified domain name
2019-03-06[pptp] added command completion and regex to check user inputhagbard
2019-03-06[pptp] adding mppe interface menuhagbard
2019-03-06Merge remote-tracking branch 'upstream/current' into currenthagbard
2019-03-06[dhcp-relay] add completion helper to relay-agents-packetsChristian Poessinger
2019-03-05T833: accel-ppp: pptp implementationhagbard
2019-02-21Fixes: T1257: implement 'set system static-host-mapping' in host_name.py and ↵hagbard
remove old function calls
2019-02-14T1174: migrate local hostname/DNS handling to vyos-1xChristian Poessinger
2019-02-11IP validation for allowed ip corrected.hagbard
2019-02-09fixes T1238 - Wireguard allows invalid IP'shagbard
2019-02-04description text changed back for interface disablehagbard
2019-02-04enhancement: T1225 - wireguard implement 'set int wireguard wg0 peer name ↵hagbard
disable' to disable single peers
2019-01-30dynamic-dns: add completion list for service providersChristian Poessinger
2019-01-12T1041: make upstream DNS server optionalChristian Poessinger
The name-server option under "service dns-forwarding" was never mandatory so users never needed to specify an upstream server. With the recent switch to PowerDNS recursor in VyOS 1.2.0 we will act as a full DNS recursor when there is no upstream DNS server configured.
2018-12-16Revert "T1087: Firewall on Wireguard Interface implementation"Daniil Baturin
This reverts commit 51f61991092a163f680e4ec8f122e73f4074ddf9. It's not how it's done, those templates are generated by a script in vyatta-cfg-firewall. If we are planning a firewall overhaul in 1.3.x, there's no reason to transplant the old approach to new code.
2018-12-11T1087: Firewall on Wireguard Interface implementationhagbard
2018-12-09T1091: extend DNS forwarding/DNSSEC completion help textChristian Poessinger
2018-12-09T1091: add DNS forwarding completion helpers for DNSSECChristian Poessinger
2018-11-30Fixes: T1061: Wireguard: Missing option to administrativly shutdown interfacehagbard
2018-11-26T835: improve help text for PPPoE CLI.Daniil Baturin
2018-11-23T835: adding description to ppp-optionshagbard
2018-11-19T835: migration script for radius' secret vs. key, rolled back thehagbard
change to 'mode local|radius'
2018-11-18T835: adding default pado delay and mode autocompletehagbard
2018-11-17T1018: remove obsoleted 'dynamic' option from NTPChristian Poessinger
Increase NTP config version from 0 to 1. For more information see [1]. ntpd: Warning: the "dynamic" keyword has been obsoleted and will be removed in the next release [1]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=553976
2018-11-14Fixes: T940 adding immark to syslog optionshagbard
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 01:12:41 +0000