| Age | Commit message (Collapse) | Author |
|---|
|
features
|
|
underscore and dot
|
|
|
|
|
|
interfaces
Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can
not be used as source-interface for e.g. a tunnel.
The main reason is that these are dynamic interfaces which come and go from a
kernel point of view, thus it's not possible to bind an interface to them.
|
|
We will use _ as CLI level divider. The XML definition filename and also
the Python helper should match the CLI node.
Example:
set interfaces ethernet -> interfaces_ethernet.xml.in
set interfaces bond -> interfaces_bond.xml.in
set service dhcp-server -> service_dhcp-server-xml.in
|
|
|
|
Shorten and simplify `system domain-search` config path from:
```
set system domain-search domain <domain1>
```
to:
```
set system domain-search <domain1>
```
This will shorten the path and also make consistent with `domain-search`
config in other places (like `dhcp-server`).
|
|
Running ddclient on a VLAN interface will fail during reboot as there is no
discrete priority to tell that the dynamic DNS service needs to be started
after the interfaces.
|
|
T5801: Rewritten L2TP to get_config_dict
|
|
T5842: Rewritten PPTP to get_config_dict
|
|
dhcp: T3316: Support hostname, DUID and MAC address in reservation
|
|
Rewritten PPTP to get_config_dict
Fixed 'dynamic-author' commands. These commands did not create
anything in accel-ppp config.
|
|
`include/firewall/rule-log-options.xml.i` is now more aptly renamed to
`include/firewall/log-options.xml.i`.
|
|
This file is a left over from previous refactoring and no longer
referenced anywhere in the interface definitions.
|
|
|
|
Rename chain level defaults log option from `enable-default-log` to
`default-log` for consistency.
|
|
|
|
T160: NAT64 add match firewall mark feature
|
|
Match mark allows to use firewall marks of packet to use
a specific pool
Example of instance config /run/jool/instance-100.json
```
...
"pool4": [
{
"protocol": "TCP",
"prefix": "192.0.2.10",
"port range": "1-65535",
"mark": 23
},
...
```
|
|
|
|
|
|
Reinstate support for hostname in DHCP reservation. Having `hostname` in
allows for server-side assignment of hostname. This is useful for static
lookup of hostname.
Ensure that hostname is a valid FQDN (doesn't have underscore, etc.)
Additionally, support using either of DUID or MAC address for
reservation. While MAC address is typically used for IPv4, and DUID is
typically used for IPv6, either of them can be used in IPv4 and IPv6
reservations in Kea.
|
|
srv6: T591: enable SR enabled packet processing on defined interfaces
|
|
T2898: add ndp-proxy service
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
|
|
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
|
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
|
|
ddclient: T5144,T5791: Fix migration to avoid config name conflict
|
|
OCserv manual recommended HTTP headers tobe included in the configuration.
(cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
|
|
frr: T4020: add option to define number of open file descriptors
|
|
This allows the operator to control the number of open file descriptors each
daemon is allowed to start with. The current assumed value on most operating
systems is 1024.
If the operator plans to run bgp with several thousands of peers then this is
where we would modify FRR to allow this to happen.
set system frr descriptors <n>
|
|
|
|
T4163: Add BGP Monitoring Protocol BMP feature
|
|
T5798: load-balancing revese-proxy add multiple SSL certificates
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
|
|
Enforce constraint on Dynamic DNS service name to be alphanumeric
(including hyphens and underscores).
|
|
VyOS CLI
set protocols segment-routing srv6 locator bar prefix '2001:b::/64'
set protocols segment-routing srv6 locator foo behavior-usid
set protocols segment-routing srv6 locator foo prefix '2001:a::/64'
Will generate in FRR
segment-routing
srv6
locators
locator bar
prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16
exit
!
locator foo
prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16
behavior usid
exit
!
exit
!
exit
!
exit
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
|
|
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
|
|
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json`
for improved developer experience.
The `.gitattrbutes` settings are based on:
Git documentation (https://git-scm.com/docs/gitattributes#_effects)
GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings)
Community templates (https://github.com/gitattributes/gitattributes)
Since editor-agnostic line-ending specific settings are applied to
`.gitattributes`, they can be removed from `.vscode/settings.json`.
The global VSCode defaults have also been removed to avoid duplication.
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
|
|
|
|
|
|
|
|
T5775: firewall: re-add state-policy to firewall. These commands are …
|
|
- Update the base (rebase)
- Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i
- Delete unwanted `write_json`, use `write_file` instead
- Remove unnecessary deleting of default values for tagNodes T2665
- Add smoketest
Example:
```
set interfaces ethernet eth0 address '192.168.122.14/24'
set interfaces ethernet eth0 address '192.168.122.10/24'
set interfaces ethernet eth2 address '2001:db8::1/64'
set nat64 source rule 100 source prefix '64:ff9b::/96'
set nat64 source rule 100 translation pool 10 address '192.168.122.10'
set nat64 source rule 100 translation pool 10 port '1-65535'
```
|
