| Age | Commit message (Collapse) | Author |
|---|
|
T6630: ntp: support hardware timestamp offload and other mechanisms to improve accuracy
|
|
|
|
|
|
|
|
|
|
|
|
There is no input CLI validation on the interface name passed to the LLDP
service.
|
|
syslog: T5367: add format option to include timezone in message
|
|
|
|
Add CLI option to include the systems timezone in the syslog message sent to
a collector. This can be enabled using:
set system syslog host <hostname> format include-timezone
|
|
T6703: Adds option to configure AMD pstate driver
|
|
openfabric: T6652: Add support for OpenFabric protocol
|
|
pppoe-server: T6685: Add options to accept any and blank service names
|
|
|
|
T6701: Added ability to disable the container DNS plugin
|
|
|
|
|
|
|
|
T6679: add group option for nat66
|
|
T6693: wireless: Enable WiFi-6 (802.11ax) for 2.4GHz AccessPoints
|
|
Add ability to set the container network with a disable-dns setting to disable
the DNS plugin that is on be default.
set container network <network> no-name-server
|
|
|
|
|
|
OpenFabric is a routing protocol providing link-state routing with efficient flooding for topologies like spine-leaf networks.
FRR implements OpenFabric in a daemon called fabricd
|
|
|
|
T6647: firewall. Introduce patch for accepting invalid ARP and DHCP
|
|
stateful bridge firewall. This patch is needed because ARP and DHCP are marked as invalid connections. Also, add ehternet-type matcher in bridge firewall.
|
|
|
|
T6183: interfaces openvpn: suppport specifying IP protocol version
|
|
ipoe_server: T6649: Accel-ppp separate vlan-mon from listen interfaces
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPENVPN: T6555: add server-bridge options in mode server
|
|
* Only matching flags and fields used by modern RFC2890 "extended GRE" -
this is backwards-compatible, but does not match all possible flags.
* There are no nftables helpers for the GRE key field, which is critical
to match individual tunnel sessions (more detail in the forum post)
* nft expression syntax is not flexible enough for multiple field
matches in a single rule and the key offset changes depending on flags.
* Thus, clumsy compromise in requiring an explicit match on the "checksum"
flag if a key is present, so we know where key will be. In most cases,
nobody uses the checksum, but assuming it to be off or automatically
adding a "not checksum" match unless told otherwise would be confusing
* The automatic "flags key" check when specifying a key doesn't have similar
validation, I added it first and it makes sense. I would still like
to find a workaround to the "checksum" offset problem.
* If we could add 2 rules from 1 config definition, we could match
both cases with appropriate offsets, but this would break existing
FW generation logic, logging, etc.
* Added a "test_gre_match" smoketest
|
|
|
|
prerouting chain; re introduce <set vrf> in policy; change global options for passing traffic to IPvX firewall; update smoketest
|
|
enabling/disabling sending traffic from bridge layer to ipvX layer
|
|
new chains, priorities, and firewall groups
|
|
T5873: ipsec remote access VPN: support VTI interfaces.
|
|
|
|
To start the service under VRF requires starting under User=root
otherwise it had issues with cgroups
|
|
* PBR can only target table IDs up to 200 and the previous PR to extend the
range was rejected
* PBR with this PR can now also target VRFs directly by name, working around
targeting problems for VRF table IDs outside the overlapping 100-200 range
* Validation ensures rules can't target both a table ID and a VRF name
(internally they are handled the same)
* Added a simple accessor (get_vrf_table_id) for runtime mapping a VRF name
to table ID, based on vyos.ifconfig.interface._set_vrf_ct_zone().
It does not replace that usage, as it deliberately does not handle non-VRF
interface lookups (would fail with a KeyError).
* Added route table ID lookup dict, global route table and VRF table defs
to vyos.defaults. Table ID references have been updated in code touched
by this PR.
* Added a simple smoketest to validate 'set vrf' usage in PBR rules
|
|
T6362: Create conntrack logger daemon
|
|
OpenVPN CLI-option: T6571: rename ncp-ciphers with data-ciphers
|
|
(#3616)
* Change ipsec match-ipsec/none to match-ipsec-in and match-none-in for
fw rules
* Add ipsec match-ipsec-out and match-none-out
* Change all the points where the match-ipsec.xml.i include was used
before, making sure the new includes (match-ipsec-in/out.xml.i) are
used appropriately. There were a handful of spots where match-ipsec.xml.i
had snuck back in for output hooked chains already
(the common-rule-* includes)
* Add the -out generators to rendered templates
* Heavy modification to firewall config validators:
* I needed to check for ipsec-in matches no matter how deeply nested
under an output-hook chain(via jump-target) - this always generates
an error.
* Ended up retrofitting the jump-targets validator from root chains
and for named custom chains. It checks for recursive loops and improper
IPsec matches.
* Added "test_ipsec_metadata_match" and "test_cyclic_jump_validation"
smoketests
|
|
|
