summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2023-12-21dhcp: T3316: Apply migration for valid hostname, and identifier (DUID)Indrajit Raychaudhuri
2023-12-21dhcp: T3316: Support hostname, DUID and MAC address in reservationIndrajit Raychaudhuri
Reinstate support for hostname in DHCP reservation. Having `hostname` in allows for server-side assignment of hostname. This is useful for static lookup of hostname. Ensure that hostname is a valid FQDN (doesn't have underscore, etc.) Additionally, support using either of DUID or MAC address for reservation. While MAC address is typically used for IPv4, and DUID is typically used for IPv6, either of them can be used in IPv4 and IPv6 reservations in Kea.
2023-12-21Merge pull request #2663 from c-po/srv6-part2Christian Breunig
srv6: T591: enable SR enabled packet processing on defined interfaces
2023-12-21Merge pull request #2665 from c-po/ndp-proxyChristian Breunig
T2898: add ndp-proxy service
2023-12-21dhcp: T5846: Ensure DUID regex range is boundIndrajit Raychaudhuri
The DUID regex was missing a lower bound, which could cause it not to match when it should. We have to specify the lower bound explicitly as 0 to keep the regex behavior similar to that in Python (in Python, omitting the lower bound is equivalent to specifying 0).
2023-12-21dhcp: T5846: Fix include pathIndrajit Raychaudhuri
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition.
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-20srv6: T591: enable SR enabled packet processing on defined interfacesChristian Breunig
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be processed or not. This is done using /proc/sys/net/conf/<iface>/seg6_* variables: seg6_enabled - BOOL Accept or drop SR-enabled IPv6 packets on this interface. Relevant packets are those with SRH present and DA = local. 0 - disabled (default) not 0 - enabled Or the VyOS CLI command: * set protocols segment-routing interface eth0 srv6
2023-12-20T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP
2023-12-16Merge pull request #2617 from indrajitr/ddclient-improvement-round-3-2023-12-11Christian Breunig
ddclient: T5144,T5791: Fix migration to avoid config name conflict
2023-12-16ocserv: T5796: add CLI knob "http-security-headers"fett0
OCserv manual recommended HTTP headers tobe included in the configuration. (cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-15firewall: T4502: add ofload to firewall table actionsGurliGebis
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-13ddclient: T5791: Enforce alphanumeric constraint on service nameIndrajit Raychaudhuri
Enforce constraint on Dynamic DNS service name to be alphanumeric (including hyphens and underscores).
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication.
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08dhcp: T3316: Add time-zone node for options 100 and 101sarthurdev
2023-12-08dhcp: T3316: Add captive portal v4/v6 optionssarthurdev
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
2023-12-07Merge pull request #2539 from nicolas-fort/T5775Daniil Baturin
T5775: firewall: re-add state-policy to firewall. These commands are …
2023-12-06T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ```
2023-12-06nat64: T160: Implement Jool-based NAT64 translatorJoe Groocock
Signed-off-by: Joe Groocock <me@frebib.net>
2023-12-05Merge pull request #2574 from nicolas-fort/T5779Daniil Baturin
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
2023-12-05T5779: conntrack: Apply fixes to <set system conntrack timeout custom>. ↵Nicolas Fort
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
2023-12-04Merge pull request #2501 from aapostoliuk/T5688-currentChristian Breunig
accel-ppp: T5688: Standardized pool configuration in accel-ppp
2023-12-04accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different.
2023-12-01Merge pull request #2554 from indrajitr/ddclient-update-20231128Christian Breunig
ddclient: T5791: Update dynamic dns configuration path for consistency
2023-12-01Merge pull request #2547 from aapostoliuk/T4704-circinusChristian Breunig
policy: T4704: Allowed to set metric (MED) to (+/-)rtt
2023-11-30ddclient: T5791: Migration script for dynamic dns config path changeIndrajit Raychaudhuri
2023-11-30ddclient: T5791: Remove XML includes that aren't used anymoreIndrajit Raychaudhuri
As followup to interface definition change, remove XML snippets that aren't used anymore. They were there because they were 'include'-ed multiple times in the interface definition `dynamic-dns.xml.in`. Since that's not the case anymore, they can be removed.
2023-11-30ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-11-30policy: T4704: Allowed to set metric (MED) to (+/-)rttaapostoliuk
Allowed to set metric (MED) to (+/-)rtt in the route-map.
2023-11-26http-api: T5782: use single config-mode script for https and http-apiJohn Estabrook
2023-11-24T5775: firewall: re-add state-policy to firewall. These commands are now ↵Nicolas Fort
included in <set firewall global-options state-policy> node.
2023-11-22Merge pull request #2528 from nicolas-fort/T5637-Extend-bridgeChristian Breunig
T5637: firewall: extend rule for default-action to firewall bridge
2023-11-22Merge pull request #2527 from c-po/t5630-mru-part-2Christian Breunig
pppoe: T5630: make MRU default to MTU if unspecified
2023-11-22T5637: firewall: extend rule for default-action to firewall bridge, in order ↵Nicolas Fort
to be able to catch logs using separte rule for default-action
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value.
2023-11-22vxlan: T5759: change default MTU from 1450 -> 1500 bytesChristian Breunig
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN interfaces using iproute2 the MTU differs depending on the creation syntax: ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \ ttl 16 nolearning vnifilter local 172.16.33.201 ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0 ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0 132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000 link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff 133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000 link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff 134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments as ethernet bridges with MTU < 1500 bytes are less fun. Increase default MTU to 1500 bytes. Migrate old configurations to use 1450 bytes if not specified otherwise on the CLI.
2023-11-22Merge pull request #2499 from c-po/t5753-vxlan-vnifilterChristian Breunig
vxlan: T5753: add support for VNI filtering
2023-11-21http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components.
2023-11-20Merge pull request #2508 from c-po/t5762-https-api-socketDaniil Baturin
http: T5762: api: make API socket backend communication the one and only default
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 00:07:19 +0000