| Age | Commit message (Collapse) | Author |
|---|
|
There are cloud environments available where the maximum supported ethernet
MTU is e.g. 1450 bytes, thus we clamp this to the adapters maximum MTU value
or 1500 bytes - whatever is lower.
(cherry picked from commit 8296cc727066e739c178918a91cfc11d20d26fe1)
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
(cherry picked from commit 274b2da242acd1f1f64ff1dee471e34295137c5f)
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
(cherry picked from commit 4c7c168fe970b807750a05ceb66b70c0d8652535)
|
|
T6192: allow binding SSH to multiple VRF instances (backport #3229)
|
|
The next evolutional step after adding get_config_dict(..., with_pki=True) is
to add a common verification function for the recurring task of validating SSL
certificate existance in e.g. EAPoL, OpenConnect, SSTP or HTTPS.
(cherry picked from commit 3b758d870449e92fece9e29c791b950b332e6e65)
|
|
Currently VyOS only supports binding a service to one individual VRF. It might
become handy to have the services (initially it will be VRF, NTP and SNMP) be
bound to multiple VRFs.
Changed VRF from leafNode to multi leafNode with defaultValue: default - which
is the name of the default VRF.
(cherry picked from commit e5af1f0905991103b12302892e6f0070bbb7b770)
|
|
(cherry picked from commit 5bb27f0c6220fd940b63cdd37a60c312c0ac3efd)
|
|
Extend the way how we determine if interfaces exist in VyOS. In the past we
only validated if the interface in question really exists at the OS level.
This has some drawbacks as services (like OSPF or OSPFv3) can also handle
interfaces dynamically which appear or leaf the OS.
This commit not only checks for OS interfaces but also if the interface in
question was configured at the CLI level, this is proof enough to pass the
check. If it does not exist at the CLI level, we continue searching it it's
maybe a Kernel interface - useful for container networks.
In addition we can now not only raise() an error but simply show a warning if
an interface does not exist.
(cherry picked from commit f7250ecf1d119f14d72f99ee379deaaae0790f0e)
|
|
This uses a more common pattern froma base class while the original code from
0a1c9bc38 ("T5791: DNS dynamic exclude check for dynamic interfaces PPPoE") is
still retained.
(cherry picked from commit e5ce4222c6e9b24d276625678db7339ada0c54ef)
|
|
interfaces
Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can
not be used as source-interface for e.g. a tunnel.
The main reason is that these are dynamic interfaces which come and go from a
kernel point of view, thus it's not possible to bind an interface to them.
(cherry picked from commit 5062f5d313548d6ebb9c07fee6b6d6be25b8f8f0)
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
(cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
|
|
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
The original implementation of defaults, and workaround required, would
leave an entry {'dhcpv6_options': {'pd': {}}} in the interface_dict.
|
|
Some interface drivers don't support/provide min_mtu and max_mtu values
For example VyOS in docker container with 'veth' driver on some
platforms
As a workarund add default values for min/max MTU for calculations
and pass function "verify_mtu(config)"
|
|
If 'client_ip_pool' not exists in config we cannot search it
in the dictionary
dict_search_recursive(config, 'gateway_address', ['client_ip_pool', 'name'])
Add check
|
|
sstp-client
|
|
Add a new feature to allow to use named pools
Also it can be used with RADIUS attribute 'Framed-Pool'
set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
We check if local_users is None
Check also and empty dict
{'access_concentrator': 'vyos-ac',
'authentication': {'local_users': {},
|
|
In addition to the rewrite to make use of get_config_dict() the CLI is
slightly adjusted as specified in T4703.
* Rename vlan-id and vlan-range to simply vlan
* Rename network-mode to simply mode
* Re-use existing common Jinja2 template for Accel-PPP which are shared
with PPPoE and SSTP server.
* Retrieve default values via defaultValue XML node
|
|
A macsec interface requires a dedicated source interface, it can not be
shared with another macsec or a pseudo-ethernet interface.
set interfaces macsec macsec10 address '192.168.2.1/30'
set interfaces macsec macsec10 security cipher 'gcm-aes-256'
set interfaces macsec macsec10 security encrypt
set interfaces macsec macsec10 security mka cak '232e44b7fda6f8e2d88a07bf78a7aff4232e44b7fda6f8e2d88a07bf78a7aff4'
set interfaces macsec macsec10 security mka ckn '09924585a6f3010208cf5222ef24c821405b0e34f4b4f63b1f0ced474b9bb6e6'
set interfaces macsec macsec10 source-interface 'eth1'
commit
set interfaces pseudo-ethernet peth0 source-interface eth1
commit
Reuslts in
FileNotFoundError: [Errno 2] failed to run command: ip link add peth0 link eth1 type macvlan mode private
returned:
exit code: 2
noteworthy:
cmd 'ip link add peth0 link eth1 type macvlan mode private'
returned (out):
returned (err):
RTNETLINK answers: Device or resource busy
[[interfaces pseudo-ethernet peth0]] failed
Commit failed
|
|
on error
|
|
We should not print the entire dictionary - we only need the bridge interface
name:
Bug:
Cannot assign address to interface "eth1" as it is a member of bridge
"{'br0': {'allowed_vlan': ['5-50', '101'], 'native_vlan': '101'}}"!
Fixed:
Cannot assign address to interface "eth1" as it is a member of bridge
"br0"!
|
|
|
|
Fix logic for verify traffic-policy in def verify_mirror_redirect
It checks just "traffic_policy.in" and should also checks if
'mirror' or 'redirect' exists in config
|
|
|
|
|
|
|
|
|
|
|
|
This commit fixes a small typo where the client cert name was being used
to index the CA configuration dict.
Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
|
|
(cherry picked from commit c1015d8ce0013719eb898b60b14ffec192b8141c)
|
|
|
|
This commit also extends the smoketest to verify that the exception for this
error is raised.
|
|
|
|
VyOS will automatically append the subsystem name (pppoe-server or sstp) when
something goes wrong. No need to hardcode this into the error string a second
time.
|
|
|
|
A validator is missing checking that if authentication is used on a PPPoE
interface, both username and password are set.
(cherry picked from commit 0361c3ac449f183476f7aee31439417d9f7f8012)
|
|
|
|
|
|
The introduction of key_mangling=('-', '_') when working with get_config_dict()
caused more harm then good. This commit extends common helpers and adds new
helpers when verifying the existence of route-maps, access-lists or prefix-lists.
|
|
We can leak routes back to the default VRF, thus the check added by commit
9184dfb5 ("static: vrf: T3344: add target vrf verify()") must have a "bail out"
option when one want's to leak routes into the default VRF.
|
|
|
|
Streamline the CLI configuration where we try to use remote on other interfaces
like vxlan, geneve.
|
|
Streamline the CLI configuration where we try to use source-address when
creating connections which are especially sourced from a discrete address.
|
|
The following list shows the mapping of VyOS tunnel encapsulation modes to the
corresponding Linux modes.
VyOS Linux
gre gre
gre-bridge gretap
ipip ipip
ipip6 ipip6
ip6ip6 ip6ip6
ip6gre ip6gre
sit sit
Besides gre-bridge this is pretty consistent. As bridge interfaces are also
called tap interfaces gre-bridge will be renamed to gretap to make the
post-processing much easier.
This means (in detail) that there are no more child classes of _Tunnel and
there will be now one geneirc TunnelIf class handling all sorts of encapsulation.
|
|
Interface.get_config() was always a pure helper which exposed a "per interface
type" dictionary which was then fed by the caller to create interfaces by
iproute2 which required additional options during creation time.
Such interfaces had been:
* tunnel
* vxlan
* geneve
* macsec
* wifi
* macvlan / pseudo-ethernet
The code was always duplicated to convert from the VyOS CLI based get_config_dict()
to a dict which can be used to feed iproute2.
This path has been removed and we now always feed in the entire dictionary
retrieved by get_config_dict() or in the interfaces case, it's high-level wrapper
get_interface_dict() to the interface we wan't to create.
This also adds the - personally long awaited - possibility to get rid of the
derived tunnel classes for e.g. GRE, IPIP, IPIP6 and so on.
|
|
tunnel: T3030: Add erspan protocol support
|
|
In the past it was possible to configure a vif-s interface and a vif interface
both with the same VLAN ID. VyOS 1.2 reported a Kernel error:
RTNETLINK answers: File exists
Error creating VLAN device eth1.100
so this should not be possible at all in VyOS 1.3
|
|
package type automatic detection)
|
