summaryrefslogtreecommitdiff
path: root/python/vyos/configverify.py
AgeCommit message (Collapse)Author
2021-08-21vyos.configverify: use build-in functions for verify_interface_exists()Christian Poessinger
2021-08-11accel-ppp: T3731: eliminate service name from error messageChristian Poessinger
VyOS will automatically append the subsystem name (pppoe-server or sstp) when something goes wrong. No need to hardcode this into the error string a second time.
2021-07-20pki: eapol: T3642: Migrate EAPoL to use PKI configurationsarthurdev
2021-06-13pppoe: T3621: validate that both username and password are setChristian Poessinger
A validator is missing checking that if authentication is used on a PPPoE interface, both username and password are set. (cherry picked from commit 0361c3ac449f183476f7aee31439417d9f7f8012)
2021-05-24pseudo-ethernet: T3575: verify parent interface MTUChristian Poessinger
2021-05-23vyos.configverify: T3570: sub interface MTU must be less or equal to parent MTUSimon
2021-04-08protocols: T3464: proper handling of routing policy configurationChristian Poessinger
The introduction of key_mangling=('-', '_') when working with get_config_dict() caused more harm then good. This commit extends common helpers and adds new helpers when verifying the existence of route-maps, access-lists or prefix-lists.
2021-03-17vyos.configverify: T3344: verify_vrf() must handle "default" VRFChristian Poessinger
We can leak routes back to the default VRF, thus the check added by commit 9184dfb5 ("static: vrf: T3344: add target vrf verify()") must have a "bail out" option when one want's to leak routes into the default VRF.
2021-03-03tunnel: T2966: add ip6gretap encapsulation supportChristian Poessinger
2021-02-28tunnel: T3366: rename remote-ip to remoteChristian Poessinger
Streamline the CLI configuration where we try to use remote on other interfaces like vxlan, geneve.
2021-02-28tunnel: T3366: rename local-ip to source-addressChristian Poessinger
Streamline the CLI configuration where we try to use source-address when creating connections which are especially sourced from a discrete address.
2021-02-28tunnel: T3364: rename encapsulation mode "gre-bridge" to "gretap"Christian Poessinger
The following list shows the mapping of VyOS tunnel encapsulation modes to the corresponding Linux modes. VyOS Linux gre gre gre-bridge gretap ipip ipip ipip6 ipip6 ip6ip6 ip6ip6 ip6gre ip6gre sit sit Besides gre-bridge this is pretty consistent. As bridge interfaces are also called tap interfaces gre-bridge will be renamed to gretap to make the post-processing much easier. This means (in detail) that there are no more child classes of _Tunnel and there will be now one geneirc TunnelIf class handling all sorts of encapsulation.
2021-02-28vyos.ifconfig: T1579: remove calls to vyos.ifconfig.Interface.get_config()Christian Poessinger
Interface.get_config() was always a pure helper which exposed a "per interface type" dictionary which was then fed by the caller to create interfaces by iproute2 which required additional options during creation time. Such interfaces had been: * tunnel * vxlan * geneve * macsec * wifi * macvlan / pseudo-ethernet The code was always duplicated to convert from the VyOS CLI based get_config_dict() to a dict which can be used to feed iproute2. This path has been removed and we now always feed in the entire dictionary retrieved by get_config_dict() or in the interfaces case, it's high-level wrapper get_interface_dict() to the interface we wan't to create. This also adds the - personally long awaited - possibility to get rid of the derived tunnel classes for e.g. GRE, IPIP, IPIP6 and so on.
2021-02-04Merge pull request #620 from jack9603301/T3030Christian Poessinger
tunnel: T3030: Add erspan protocol support
2021-02-02vlan: T3018: vif/vif-s vlan id can not be re-usedChristian Poessinger
In the past it was possible to configure a vif-s interface and a vif interface both with the same VLAN ID. VyOS 1.2 reported a Kernel error: RTNETLINK answers: File exists Error creating VLAN device eth1.100 so this should not be possible at all in VyOS 1.3
2021-02-02tunnel: T3030: Modify the command line to streamline configuration (support ↵jack9603301
package type automatic detection)
2021-01-29vif-c: verify: T3269: fix configuration verificationBrandon Stepler
2021-01-24ospf(v3): T3236: T3244: adjust to route-map converted name (_ for -)Christian Poessinger
A hyphen in a route-map name will be converted to _, take care about this effect during validation.
2021-01-24ospf(v3): T3236: T3244: add verify() for used route-map existenceChristian Poessinger
2021-01-07vyos.configverify: provide generic helper to check for interface existenceChristian Poessinger
2021-01-06dhcpv6-pd: verify: T3193: detect conflict between auto-assigned and ↵Brandon Stepler
configured SLA-IDs "data/templates/dhcp-client/ipv6.tmpl" handles the auto-assigning of SLA-IDs on lines 39, 46, and 52.
2021-01-06dhcpv6-pd: verify: T3193: allow multiple auto-assigned SLA-IDsBrandon Stepler
"data/templates/dhcp-client/ipv6.tmpl" handles the auto-assigning of SLA-IDs on lines 39, 46, and 52.
2021-01-06dhcpv6-pd: verify: T3193: allow more than one VLAN interfaceBrandon Stepler
VLAN interfaces contain periods, which make them incompatible with dict_search().
2021-01-03mirror: add verify() check so we can not mirror back to our selfChristian Poessinger
2020-12-29ethernet: T1466: add EAPoL supportChristian Poessinger
2020-11-13T3060: Fixing a backwares check on dh lengthkroy
2020-11-13vyos.template: provide general is_ip(v4|v6) helpersChristian Poessinger
We had two places were the is_ip, is_ipv4 and is_ipv6 helpers had been defined. All places now have been converged into vyos.template as they are used both in the Jinja2 templates and also in our scripts.
2020-10-30openvpn: T2994: verify DH key lengthChristian Poessinger
2020-10-29verify: T2587: allow MTU < 1280 when IPv6 is disabled on an interfaceChristian Poessinger
2020-10-28vyos.util: T2995: rename vyos_dict_search() -> dict_search()Christian Poessinger
Renamed using snippet below: ---------------------------- for file in $(find . -name "*.py") do sed -i "s/vyos_dict_search/dict_search/" $file done
2020-10-05validate: ipv6: mtu: T2427: wireless interface MTU is not configurableChristian Poessinger
Commit 5db3d631 ("ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled on the interface") checked the "mtu" key for it's value and the test only passed if mtu was larger then the required 1280 bytes when IPv6 address have been configured on the link. wireless (WiFi) interfaces have no MTU node - thus this always resulted in a Python KeyError.
2020-10-04sstp: T2960: migrate to get_config_dict() and reusable templatesChristian Poessinger
2020-09-26ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled on the interfaceChristian Poessinger
Using an MTU less then the required 1280 bytes (as per RFC) on an interface where IPv6 is not explicitly disabled by: - set interfaces ethernet eth1 ipv6 address no-default-link-local - not having any other IPv6 address configured Will now trigger a commit error via verify() instead of raising FileNotFoundError!
2020-09-25ifconfig: T2912: add helper to verify interface min/max supported MTUChristian Poessinger
Currently the MTU size of an interface is only checked when entered via CLI but if the interface supportes the configured MTU at all is not verified at all. New helper functions get_min_mtu(), get_max_mtu() and verify_mtu() have been added to provide a central API for validation.
2020-09-24dhcpv6-pd: verify: T2923: interface is required where the prefix is assignedChristian Poessinger
When configuring DHCPv6-PD it is mandatory to also specify at least one interface where the newly delegated prefix will be used. Without this setting DHCPv6-PD makes no sense at all.
2020-09-22ifconfig: T2653: bond: bridge: ensure member interface is not a source-interfaceChristian Poessinger
As we already check that a bond/bridge member interface is not a member of any other bridge or bond, the check must be extended. We also need to ensure that the bond member interface is not used as a source-interface to pppoe, macsec, tunnel, pseudo-ethernet, vxlan interfaces.
2020-08-23T2755: convert jmespath.search() to vyos_dict_search() for performanceChristian Poessinger
2020-08-23vyos.configverify: T2677: extend verify_dhcpv6() for non duplicate sla-idsChristian Poessinger
2020-08-15vyos.configverify: no need to call .keys() when searching dictChristian Poessinger
2020-08-01ifconfig: T2752: fix string format in verify_interface_exists()Christian Poessinger
We do not have a formatted string here thus the "f" keyword is wrong and triggered an exception.
2020-07-25vyos.configverify: T2653: fix some formatting issuesChristian Poessinger
2020-07-25ethernet: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for ethernet based interfaces which also supports 802.1q, 802.1ad VLANs. This commit migrates the existing codebase for an ethernet based interfaces and implements the missing parts for VLANs. Adding or migrating other interfaces (e.g. bridge or bond) will become much easier as they must reuse the entire functionality - we now walk towards a single codepath. Thanks for all who made this combined effort possible! Signed-off-by: Christian Poessinger <christian@poessinger.com>
2020-07-01ifconfig: T2653: use better names for vyos.configverify functionsChristian Poessinger
2020-07-01ifconfig: T2653: move pppoe interface to get_config_dict()Christian Poessinger
2020-06-27ifconfig: T2653: add vyos.configverify.verify_source_interface() helperChristian Poessinger
2020-06-26ifconfig: T2653: add common vyos.configverify helpersChristian Poessinger
While moving towards a general interface abstraction based on get_config_dict() and the use of vyos.ifconfig.Interfaces().update() it also makes sense, to split out common verification code to a common util file - instead of duplicating the code, which is infact one of the main forces drivind this transition. vyos.configverify will hold common functions called via verify() from our src/conf_mode scripts so we do not need to copy/paste general verifications methods.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 20:41:47 +0000