| Age | Commit message (Collapse) | Author |
|---|
|
|
|
stateful bridge firewall. This patch is needed because ARP and DHCP are marked as invalid connections. Also, add ehternet-type matcher in bridge firewall.
|
|
|
|
* Only matching flags and fields used by modern RFC2890 "extended GRE" -
this is backwards-compatible, but does not match all possible flags.
* There are no nftables helpers for the GRE key field, which is critical
to match individual tunnel sessions (more detail in the forum post)
* nft expression syntax is not flexible enough for multiple field
matches in a single rule and the key offset changes depending on flags.
* Thus, clumsy compromise in requiring an explicit match on the "checksum"
flag if a key is present, so we know where key will be. In most cases,
nobody uses the checksum, but assuming it to be off or automatically
adding a "not checksum" match unless told otherwise would be confusing
* The automatic "flags key" check when specifying a key doesn't have similar
validation, I added it first and it makes sense. I would still like
to find a workaround to the "checksum" offset problem.
* If we could add 2 rules from 1 config definition, we could match
both cases with appropriate offsets, but this would break existing
FW generation logic, logging, etc.
* Added a "test_gre_match" smoketest
|
|
new chains, priorities, and firewall groups
|
|
Commit 452068ce78 ("interfaces: T6592: moving an interface between VRF instances
failed") added a similar but more detailed implementation of get_vrf_table_id()
that was added in commit adeac78ed of this PR. Move to the common available
implementation.
|
|
* PBR can only target table IDs up to 200 and the previous PR to extend the
range was rejected
* PBR with this PR can now also target VRFs directly by name, working around
targeting problems for VRF table IDs outside the overlapping 100-200 range
* Validation ensures rules can't target both a table ID and a VRF name
(internally they are handled the same)
* Added a simple accessor (get_vrf_table_id) for runtime mapping a VRF name
to table ID, based on vyos.ifconfig.interface._set_vrf_ct_zone().
It does not replace that usage, as it deliberately does not handle non-VRF
interface lookups (would fail with a KeyError).
* Added route table ID lookup dict, global route table and VRF table defs
to vyos.defaults. Table ID references have been updated in code touched
by this PR.
* Added a simple smoketest to validate 'set vrf' usage in PBR rules
|
|
(#3616)
* Change ipsec match-ipsec/none to match-ipsec-in and match-none-in for
fw rules
* Add ipsec match-ipsec-out and match-none-out
* Change all the points where the match-ipsec.xml.i include was used
before, making sure the new includes (match-ipsec-in/out.xml.i) are
used appropriately. There were a handful of spots where match-ipsec.xml.i
had snuck back in for output hooked chains already
(the common-rule-* includes)
* Add the -out generators to rendered templates
* Heavy modification to firewall config validators:
* I needed to check for ipsec-in matches no matter how deeply nested
under an output-hook chain(via jump-target) - this always generates
an error.
* Ended up retrofitting the jump-targets validator from root chains
and for named custom chains. It checks for recursive loops and improper
IPsec matches.
* Added "test_ipsec_metadata_match" and "test_cyclic_jump_validation"
smoketests
|
|
|
|
<set table> option in policy route.
|
|
specified, in order to ensure same behavior as in Equuleus
|
|
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
|
|
|
|
|
|
required
|
|
T4839: firewall: Add dynamic address group in firewall configuration
|
|
appropiate commands to populate such groups using source and destination address of the packet.
|
|
|
|
<enable|disable> commands; log and state moved to new syntax.
|
|
(valid for interfaces and groups) in firewal, nat and nat66.
|
|
filter and in policy route.
|
|
|
|
T5217: Add firewall synproxy
|
|
|
|
Add ability to SYNPROXY connections
It is useful to protect against TCP SYN flood attacks and port-scanners
set firewall global-options syn-cookies 'enable'
set firewall ipv4 input filter rule 10 action 'synproxy'
set firewall ipv4 input filter rule 10 destination port '22'
set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1'
set firewall ipv4 input filter rule 10 protocol 'tcp'
set firewall ipv4 input filter rule 10 synproxy tcp mss '1460'
set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
|
|
`set firewall flowtable <name> interface <ifname>`
`set firewall flowtable <name> offload [software|hardware]`
`set firewall [ipv4|ipv6] forward filter rule N action offload`
`set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
|
|
should be added at the end of the rule, after all matchers and befora action. Also change 2 lines in policy_route smoketest, which suddenly wasn't working as expected
|
|
forward chain and few matchers. Should be extended in the future.
|
|
firewall cli
|
|
firewall ipv6 name ...> . Also fix some unexpected behaviour with geoip.
|
|
firewall smoketest
|
|
|
|
scripts and src firewall
|
|
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
was merged
|
|
|
|
|
|
|
|
|
|
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
|
|
firewall: T4612: Support arbitrary netmasks
|
|
so this new group can be used in inbound and outbound matcher
|
|
|
|
`fqdn` node
|
|
Add support for arbitrary netmasks on source/destination addresses in
firewall rules. This is particularly useful with DHCPv6-PD when the
delegated prefix changes periodically.
|
|
|
|
|
|
|
