summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig/interface.py
AgeCommit message (Collapse)Author
2021-07-25ifconfig: backport ifconfig framework from 1.4 to support new tunnel optionsChristian Poessinger
It is easier to backport the entire vyos.ifconfig library from 1.4 instead of backporting single pieces which are required to add new feature to the tunnel interface section. In addition that both libraries are now back in sync it will become much easier to backport any other new feature introduced in VyOS 1.4!
2021-07-02conntrack-sync: T3535: Rewrite conf and op modes to XML python styleViacheslav
2021-05-15vyos.ifconfig: T3532: re-create Q-in-Q interface on protocol changeChristian Poessinger
It is not possible to change the VLAN encapsulation protocol "on-the-fly". For this "quirk" we need to actively delete and re-create the VIF-S interface. (cherry picked from commit cd504035015dca62149b57bc07d8e002bd8723b1)
2021-04-05vrf: vlan: T3438: do not automatically delete upper interfaceChristian Poessinger
Removing a VLAN (VIF) interface from the CLI always deleted all interfaces the kernel listed as "upper" in the /sys/class/net folder. This had the drawback that when deleting a VIF, also the VRF interface was simply deleted - killing all VRF related services. (cherry picked from commit 6458f91735412fb2e6e7e37f7b3e6ca587a5a235)
2021-03-19dhcp: T3300: add DHCP default route distanceBrandon Stepler
(cherry picked from commit dd2eb5e5686655c996ae95285b8ad7eb73d63d0b)
2021-03-14xdp: T2666: remove entire XDP code for 1.3 LTS imageChristian Poessinger
This is an extension to commit 801c5235 ("xdp: T2666: disable this highly experimental feature in 1.3 LTS") by dropping all XDP references in the equuleus codebase.
2021-02-28vif: T3349: use fixed ordering when enabling parent and child interfaceChristian Poessinger
When a VIF/VLAN interface is placed in admin down state but the lower interface, serving the vlan, is moved from admin down -> admin up, all its vlan interfaces will be placed in admin up state, too. This is bad as a VLAN interface will become admin up even if its specified as admin down after a reboot. To reproduce: set interfaces ethernet eth1 vif 20 disable set interfaces ethernet eth1 disable commit delete interfaces ethernet eth1 disable commit Now check the interface state and it returns UP,LOWER_UP 7: eth1.20@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:50:56:b3:09:07 brd ff:ff:ff:ff:ff:ff inet6 fe80::250:56ff:feb3:907/64 scope link valid_lft forever preferred_lft forever (cherry picked from commit 49bc3f1e3ff8416908fc986bb60b444a75a1722d)
2021-02-22vyos.ifconfig: extend debug option to print input dictChristian Poessinger
(cherry picked from commit a3e11ace758f447ddbbabd31d4903b3f71baa0b8)
2021-01-28dhcpv6: T3262: don't run DHCPv6 client when only dhcpv6-options is configuredBrandon Stepler
If dhcpv6-options is configured without requesting a DHCPv6 address or PD, the dhcpv6pd variable is assigned an empty dict. (cherry picked from commit d7d916f74e7d3b3b1fc85336f24f91af66b1e2a8)
2021-01-13ifconfig: T2653: return empty string when there is no interface descriptionChristian Poessinger
After switching to iproute2 in commit 92f36735 ("ifconfig: T2653: use iproute2 commands for alias, mac and mtu set()/get()" it is necessary to return an empty string as iproute2 returns None. (cherry picked from commit ea1be032e98fd1634e71d3c2d61b3e93bff841de)
2021-01-12ifconfig: T2653: use iproute2 commands for alias, mac and mtu set()/get()Christian Poessinger
(cherry picked from commit 92f3673538e0328488c14c90c8acf7ea6b2141ba)
2021-01-06ifconfig.interface: use Python3 f-ormat stringChristian Poessinger
2021-01-04mirror: T3089: bugfix is_mirror_intf code pathChristian Poessinger
2021-01-03mirror: T3089: remove redundant code pathsChristian Poessinger
- remove redundant code paths apply_mirror() / apply_mirror_of_monitor() - have single source available
2020-12-26mirror: T3150: When configuring QOS, the setting procedure of port mirroring ↵jack9603301
is wrong In e8957b5, we used json to parse the `tc qdisc` filter to determine whether it needs to be deleted (reduction of exception mechanism), but now we find that the json output by this command will output unparsed json in some cases, so We have to go back to the processing of the exception mechanism
2020-12-23xdp: T2666: move CLI node to "interfaces ethernet <eth> xdp"Christian Poessinger
2020-12-20Revert "dhcpv6: T3134: add missing duid support"Christian Poessinger
This reverts commit 9541355433e202fade4692851bffa33ba9d48f44.
2020-12-20dhcpv6: T3134: add missing duid supportChristian Poessinger
2020-12-14interface: mirror: T3089: Improve logic to reduce unnecessary lines of codejack9603301
2020-12-13interfaces: mirror: T3089: Fix the dependency problem between interfacesjack9603301
Since the dependency problem has not been solved before, if the monitoring interface does not exist when the mirror rule is created, the execution will be abnormal
2020-12-13interfaces: T3114: Modify the logic of the second addition to complete the ↵jack9603301
setting and streamline the code
2020-12-13interfaces: T3114: Improve VLAN ID setting logic in `bridge`jack9603301
2020-12-13interfaces: T3114: When the VLAN aware option is not detected, the setting ↵jack9603301
of `bridge` should not be overwritten
2020-12-13interfaces: T3114: Improve the processing of enabling logic for ↵jack9603301
`vlan_filter` to avoid redundant paths
2020-12-13interfaces: T3114: Remove some redundant codejack9603301
2020-12-13interfaces: T3114: Fix VLAN-aware bridge setting failurejack9603301
2020-12-08Merge pull request #633 from jack9603301/T3089Christian Poessinger
mirror: T3089: support two-way traffic mirroring
2020-12-08mirror: T3089: support two-way traffic mirroringjack9603301
2020-12-07vyos.ifconfig: T1579: keep IPv6 link-local address on reconfiguration #2Christian Poessinger
This is the second attempt after commit d247736f ("vyos.ifconfig: T1579: do not remove IPv6 link-local address on reconfiguration"). We only clean out link-local IPv6 addresses left over after an interface MAC change.
2020-12-06Revert "vyos.ifconfig: T1579: do not remove IPv6 link-local address on ↵Christian Poessinger
reconfiguration" This reverts commit d247736f67cc056062b75a4215a031bebcfee2ee. We need to clean link-local IPv6 addresses on link reconfiguration to also drop no longer existing link-local addresse son MAC address change.
2020-12-06vyos.ifconfig: T1579: do not remove IPv6 link-local address on reconfigurationChristian Poessinger
2020-12-04vyos.ifconfig: T1579: migrate "ip source-validation" option from ↵Christian Poessinger
vyatta-cfg-quagga
2020-12-03interface: T3089: Migrate port mirroring to vyos-1xjack9603301
2020-11-27vyos.template: T2720: always enable Jinja2 trim_blocks featureChristian Poessinger
2020-11-19ifconfig: T1405: ensure MAC address is configured firstChristian Poessinger
The MAC address is changed after we have set an IP address on the interface or started dhclient. This will cause some users to receive the wrong IP address on device startup. Change to order of how parameters are set in the system. The interface MAC address is now configured first.
2020-11-13vyos.template: provide general is_ip(v4|v6) helpersChristian Poessinger
We had two places were the is_ip, is_ipv4 and is_ipv6 helpers had been defined. All places now have been converged into vyos.template as they are used both in the Jinja2 templates and also in our scripts.
2020-10-28vyos.util: T2995: rename vyos_dict_search() -> dict_search()Christian Poessinger
Renamed using snippet below: ---------------------------- for file in $(find . -name "*.py") do sed -i "s/vyos_dict_search/dict_search/" $file done
2020-10-18ifconfig: T2985: remove no longer available vyos.ifconfig.stp includeChristian Poessinger
almost every interface can be part of a bridge thus the code for changing STP cost is best part of the Interface() base class itself. Commit b5ef10cf ("ifconfig: T2985: support on demand bridge creation") implemented this change but the STP file was not removed on the test devices causing tests to pass.
2020-10-17ifconfig: T2985: support on demand bridge creationChristian Poessinger
The current implementation for bridge based interfaces has an issue which is caused by priority inheritance. We always assumed that the bridge interface will be created last, but this may not be true in all cases, where some interfaces will be created "on demand" - e.g. OpenVPN or late (VXLAN, GENEVE). As we already have a bunch of verify steps in place we should not see a bridge interface leak to the underlaying infrastructure code. This means, whenever an interface will be member of a bridge, and the bridge does yet not exist, we will create it in advance in the interface context, as the bridge code will be run in the same commit but maybe sooner or later. This will also be the solution for T2924.
2020-10-17sysctl-forwarding: T752: Add disable forwarding for ipv4sever-sever
2020-09-25ifconfig: T2912: add helper to verify interface min/max supported MTUChristian Poessinger
Currently the MTU size of an interface is only checked when entered via CLI but if the interface supportes the configured MTU at all is not verified at all. New helper functions get_min_mtu(), get_max_mtu() and verify_mtu() have been added to provide a central API for validation.
2020-09-25ifconfig: T2653: get_mtu() should return int() for easier comparisonChristian Poessinger
2020-09-25ifconfig: T2912: add helper to retrieve interface min/max supported MTUChristian Poessinger
>>> from vyos.ifconfig import Interface >>> tmp=Interface('eth0') >>> tmp.get_min_mtu() 60 >>> tmp.get_max_mtu() 9000
2020-09-20ifconfig: T2653: remove duplicates of get_config()Christian Poessinger
A lot of derived classes from Interface implemented their own get_config() method which more or less was the same everywhere. We also hat different qualifiers like @staticmethod or @classmethod. This is now changed to only have the @classmethod in Interface base class which will return the necessary dictionary keys for the required interfaces. This change is a mid reduction in lines of code which is always a very nice thing!
2020-09-20vif-s: ifconfig: T2903: use explicit VLAN protocol over raw numbersChristian Poessinger
In the past we had to provide the ethertype value used for the VLAN protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q). This should be changed to a more user friendly CLI node (protocol over ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in presenting RAW information from the ethernet header to the user. Also iproute2 calls it protocol which makes way more sense over the "raw" value.
2020-09-19ifconfig: T2653: cleanup VLAN interface commentsChristian Poessinger
2020-09-19ifconfig: T2653: convert VLAN interfaces do discrete classChristian Poessinger
Instead of using an Adapter pattern to make interfaces VLAN-aware, create a derived class named VLANIf to represent a VLAN. This change was necessary to eliminate mixed code in Interfaces class which was VLAN - free, but recently gained some VLAN specific code for set_admin_state(). In addition this "autoresolves" the issue in T2894 as a bond vlan interface will no longer change the lower interface.
2020-09-13ifconfig: T2863: only use IPv6 link-local address if interface has MAC addressChristian Poessinger
With VyOS 1.2 the default WireGuard behavior is used. This means that when a WireGuard interface is added to the system, there is no "MAC" address - also there is no IPv6 link-local address assigned by the Kernel to this particular interface. With implementation of T2653 all interfaces now receive an IPv6 address - which is also valid for WireGuard interfaces - unfortunately this logic relies on the interface MAC address - and as there is none, the link-local address will be always the same. The logic behind is coded here [1]. We generate an IPv6 link-local address even when there is no "MAC" address. The behavior/functionality (as with VyOS 1.2) must be restored to not have a link-local IPv6 address at all. Any user can add any IPv6 link-local address manually by issuing: set interfaces wireguard wg01 address fe80::ff:1/64. Change vyos.ifconfig.add_ipv6_eui64_address to only add the EUI64-based link-local address if a MAC address is available. [1] https://github.com/vyos/vyos-1x/blob/3077158391ceee4ce04c27dec33f629529727c36/python/vyos/ifconfig/interface.py#L468
2020-08-31T2636: remove workarounds for get_config_dict()Christian Poessinger
Now that b40c52682a256 ("config: T2636: get_config_dict() returns a list on multi node by default") is implemented the workarounds can be removed.
2020-08-23T2755: convert jmespath.search() to vyos_dict_search() for performanceChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 05:15:10 +0000