summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig
AgeCommit message (Collapse)Author
2021-08-22vyos.ifconfig: provide generic get_mac_synthetic() methodChristian Poessinger
WireGuard, Tunnel and also PPPoE all need a ways to calculate a synthetic MAC address used for the EUI64 link-local addresses. Instead of copying the code from Tunnel to WireGuard to PPPoE, use a generic implementation. (cherry picked from commit b7d30137b17da49ed5099d4d96659b363fc7bcc9)
2021-08-22vyos.ifconfig: bridge: remove missleading comment in update()Christian Poessinger
(cherry picked from commit e1debb1b57a445fa2357f7dbb5b3f04383f8b1e3)
2021-07-31l2tpv3: T1594: Fix timeout before set l2tpv3 interfaceViacheslav
In some cases, we need to wait until local address is assigned. And only then l2tpv3 tunnel can be configured. For example when ipv6 address is in "tentative" state or we wait for some routing daemon/route for a remote address.
2021-07-27Revert "ifconfig: drop unused classes for pppoe and vti"Christian Poessinger
This reverts commit e4d697b1d3aad0cb8e81f4c36bcaa4c089195f43. We need those classes for the operational level "show interfaces" command.
2021-07-25ifconfig: backport ifconfig framework from 1.4 to support new tunnel optionsChristian Poessinger
It is easier to backport the entire vyos.ifconfig library from 1.4 instead of backporting single pieces which are required to add new feature to the tunnel interface section. In addition that both libraries are now back in sync it will become much easier to backport any other new feature introduced in VyOS 1.4!
2021-07-25ifconfig: drop unused classes for pppoe and vtiChristian Poessinger
PPPoE uses an entire different approach to setup the interface and VTI is still implemented using the old node.def definitions from vyatta-cfg-system.
2021-07-21VXLAN: T3683: Fix for ipv6 source-interface optionViacheslav
2021-07-20ifconfig: tunnel: T3691: add missing GRETAP key supportChristian Poessinger
2021-07-13T3663: fixed in the inotify-based vrrp script.Daniil Baturin
2021-07-13T3663: use inotify-based watching in "show vrrp".Daniil Baturin
2021-07-02conntrack-sync: T3535: Rewrite conf and op modes to XML python styleViacheslav
2021-06-19ethernet: T3633: Add LRO offloadViacheslav
(cherry picked from commit 4b2fef88644bb75dadbe33b9638a4150def7e14f)
2021-06-13wwan: T3620: rename "wirelessmodem wlm" interfaces to new wwan interface treeChristian Poessinger
(cherry picked from commit c2a1c071e7d0a9ca754d7f5016eed7db188b3d1a)
2021-05-15vyos.ifconfig: T3532: re-create Q-in-Q interface on protocol changeChristian Poessinger
It is not possible to change the VLAN encapsulation protocol "on-the-fly". For this "quirk" we need to actively delete and re-create the VIF-S interface. (cherry picked from commit cd504035015dca62149b57bc07d8e002bd8723b1)
2021-05-13bonding: T3543: add support to configure lacp-rate (slow or fast)Christian Poessinger
Option specifying the rate in which we'll ask our link partner to transmit LACPDU packets in 802.3ad mode. set interfaces bonding bond0 lacp-rate <slow|fast> slow: Request partner to transmit LACPDUs every 30 seconds (default) fast: Request partner to transmit LACPDUs every 1 second (cherry picked from commit 8e392a3dbc16f7b80a979f7b4e9c11408d700e6f)
2021-04-25tunnel: T3468: add interfaces to completion helper for bridgeChristian Poessinger
(cherry-picked from commit efa744c63b388773a4ea76d0f690042ec1689159)
2021-04-05vrf: vlan: T3438: do not automatically delete upper interfaceChristian Poessinger
Removing a VLAN (VIF) interface from the CLI always deleted all interfaces the kernel listed as "upper" in the /sys/class/net folder. This had the drawback that when deleting a VIF, also the VRF interface was simply deleted - killing all VRF related services. (cherry picked from commit 6458f91735412fb2e6e7e37f7b3e6ca587a5a235)
2021-03-19dhcp: T3300: add DHCP default route distanceBrandon Stepler
(cherry picked from commit dd2eb5e5686655c996ae95285b8ad7eb73d63d0b)
2021-03-14xdp: T2666: remove entire XDP code for 1.3 LTS imageChristian Poessinger
This is an extension to commit 801c5235 ("xdp: T2666: disable this highly experimental feature in 1.3 LTS") by dropping all XDP references in the equuleus codebase.
2021-03-07vxlan: T3319: use default ttl of 16Christian Poessinger
VyOS 1.2 had a default ttl of 16 hardcoded to the node.def file [1], so until this is handled via a migration script we have to obey that particular setting. [1]: https://github.com/vyos/vyatta-cfg-system/blob/crux/templates/interfaces/vxlan/node.def#L23
2021-02-28vif: T3349: use fixed ordering when enabling parent and child interfaceChristian Poessinger
When a VIF/VLAN interface is placed in admin down state but the lower interface, serving the vlan, is moved from admin down -> admin up, all its vlan interfaces will be placed in admin up state, too. This is bad as a VLAN interface will become admin up even if its specified as admin down after a reboot. To reproduce: set interfaces ethernet eth1 vif 20 disable set interfaces ethernet eth1 disable commit delete interfaces ethernet eth1 disable commit Now check the interface state and it returns UP,LOWER_UP 7: eth1.20@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:50:56:b3:09:07 brd ff:ff:ff:ff:ff:ff inet6 fe80::250:56ff:feb3:907/64 scope link valid_lft forever preferred_lft forever (cherry picked from commit 49bc3f1e3ff8416908fc986bb60b444a75a1722d)
2021-02-22vyos.ifconfig: extend debug option to print input dictChristian Poessinger
(cherry picked from commit a3e11ace758f447ddbbabd31d4903b3f71baa0b8)
2021-01-28dhcpv6: T3262: don't run DHCPv6 client when only dhcpv6-options is configuredBrandon Stepler
If dhcpv6-options is configured without requesting a DHCPv6 address or PD, the dhcpv6pd variable is assigned an empty dict. (cherry picked from commit d7d916f74e7d3b3b1fc85336f24f91af66b1e2a8)
2021-01-13ifconfig: T2653: return empty string when there is no interface descriptionChristian Poessinger
After switching to iproute2 in commit 92f36735 ("ifconfig: T2653: use iproute2 commands for alias, mac and mtu set()/get()" it is necessary to return an empty string as iproute2 returns None. (cherry picked from commit ea1be032e98fd1634e71d3c2d61b3e93bff841de)
2021-01-12ifconfig: T2653: use iproute2 commands for alias, mac and mtu set()/get()Christian Poessinger
(cherry picked from commit 92f3673538e0328488c14c90c8acf7ea6b2141ba)
2021-01-12tunnel: T3205: bugfix gre-bridge interfacesChristian Poessinger
(cherry picked from commit 138e7a95c21fb2928182847693e366644be6e945)
2021-01-06ifconfig.interface: use Python3 f-ormat stringChristian Poessinger
2021-01-04mirror: T3089: bugfix is_mirror_intf code pathChristian Poessinger
2021-01-03mirror: T3089: remove redundant code pathsChristian Poessinger
- remove redundant code paths apply_mirror() / apply_mirror_of_monitor() - have single source available
2021-01-02ethernet: T3171: always use full CPU enable bitmask over computational maskChristian Poessinger
The Linux Kernel supports enabling more cores for RPS then we actually have. It does internal clipping/validation so there is no need for us to calculate the specifc enable mask we can simply throw "all -1" at the Kernel.
2021-01-02ifconfig: ethernet: fixup line breaksChristian Poessinger
2021-01-01ethernet: T3171: add CLI option to enable RPS (Receive Packet Steering)Christian Poessinger
set interfaces ethernet <interface> offload rps
2020-12-26mirror: T3150: When configuring QOS, the setting procedure of port mirroring ↵jack9603301
is wrong In e8957b5, we used json to parse the `tc qdisc` filter to determine whether it needs to be deleted (reduction of exception mechanism), but now we find that the json output by this command will output unparsed json in some cases, so We have to go back to the processing of the exception mechanism
2020-12-23xdp: T2666: move CLI node to "interfaces ethernet <eth> xdp"Christian Poessinger
2020-12-20ethernet: T3140: remove debug codeChristian Poessinger
2020-12-20Revert "dhcpv6: T3134: add missing duid support"Christian Poessinger
This reverts commit 9541355433e202fade4692851bffa33ba9d48f44.
2020-12-20ethernet: T3140: relax "ethernet offload-options" CLI definitionChristian Poessinger
Migrate from ethernet eth1 { offload-options { generic-receive on generic-segmentation on scatter-gather on tcp-segmentation on udp-fragmentation on } } to ethernet eth1 { offload { ufo tso sg gso gro } }
2020-12-20wifi: T2875: support bridging of wireless AP interfaceChristian Poessinger
2020-12-20dhcpv6: T3134: add missing duid supportChristian Poessinger
2020-12-19xdp: T2666: switch to example code provided by xdp-tutorialChristian Poessinger
2020-12-17ifconfig: T2653: switch to Python3 f(ormatted) stringsChristian Poessinger
2020-12-17xdp: T2666: use generic "xdp" option when loadingChristian Poessinger
Using 'xdp' will automatically decide if the driver supports 'xdpdrv' or only 'xdpgeneric'. A user later sees which driver is actually in use by calling 'ip a' or 'show interfaces ethernet'.
2020-12-17xdp: T2666: initial XDP (generic mode) forwarding supportChristian Poessinger
The CLI command 'set interfaces ethernet <interface> offload-options xdp" enables the XDP generic mode on the given interface. vyos@vyos:~$ show interfaces ethernet eth1 eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 xdpgeneric/id:151 qdisc mq state DOWN group default qlen 1000 link/ether 00:50:56:bf:ef:aa brd ff:ff:ff:ff:ff:ff inet6 fe80::250:56ff:febf:efaa/64 scope link tentative valid_lft forever preferred_lft forever Description: fooa XDP code is thankfully copied from [1], thank you for this nice tutorial. NOTE: this is an experimental feature which might break your forwarding/filtering. [1]: https://medium.com/swlh/building-a-xdp-express-data-path-based-peering-router-20db4995da66
2020-12-14interface: mirror: T3089: Improve logic to reduce unnecessary lines of codejack9603301
2020-12-13interfaces: mirror: T3089: Fix the dependency problem between interfacesjack9603301
Since the dependency problem has not been solved before, if the monitoring interface does not exist when the mirror rule is created, the execution will be abnormal
2020-12-13interfaces: T3114: Modify the logic of the second addition to complete the ↵jack9603301
setting and streamline the code
2020-12-13interfaces: T3114: Improve VLAN ID setting logic in `bridge`jack9603301
2020-12-13interfaces: T3114: When the VLAN aware option is not detected, the setting ↵jack9603301
of `bridge` should not be overwritten
2020-12-13interfaces: T3114: Improve the processing of enabling logic for ↵jack9603301
`vlan_filter` to avoid redundant paths
2020-12-13interfaces: T3114: Remove some redundant codejack9603301
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 15:25:51 +0000