summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig
AgeCommit message (Collapse)Author
2023-04-15vyos.ifconfig: T2104: support adding and removing VLANs in one call.Christian Breunig
VLANIf('eth0.10').remove() will create and remove the VLAN in one command. Thus one can ensure when calling remove() on a VLAN it will always succeed.
2023-03-28interfaces: T4885: fix Perl to Python rewrite of clear/reset_countersJohn Estabrook
2023-02-25tunnel: T5034: migrate "multicast enable" CLI node to enable-multicastChristian Breunig
Tunnel interface multicast settings can be "enabled or disabled". As we prefer valueless nodes, and the linux kernel default is "disabled" we should add a set interfaces tunnel tunXX enable-multicast command
2023-02-20T5007: Fix multicast implementation for the tunnel interfacesViacheslav Hletenko
Multicast has not been implemented for the tunnel interfaces. We have only configuration CLI commands that do anything. Fix it. ip link set dev <tag> multicast on ip link set dev <tag> multicast off
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-09vyos.ifconfig: T1579: improve source-validation warningChristian Breunig
Inform user about the interface where the warning occured.
2023-01-17ifb: T4938: add Python implementation for input function block interfacesChristian Breunig
2023-01-13ethernet: rps: T4928: adjust to Kernel ABI changes #2Christian Breunig
Fix ValueError: Unknown format code 'x' for object of type 'str' added in commit c0ffb8ba4e663 ("ethernet: rps: T4928: adjust to Kernel ABI changes").
2023-01-12ethernet: rps: T4928: adjust to Kernel ABI changesChristian Breunig
In the past we could simply set all bits for all CPUs even if they did not exist. With 6.1.y Kernel series this is no longer possible and the input data is validated against the available number of CPUs.
2022-12-11sstp: T4384: initial implementation of SSTP client CLIChristian Poessinger
vyos@vyos# show interfaces sstpc sstpc sstpc10 { authentication { password vyos user vyos } server sstp.vyos.net ssl { ca-certificate VyOS-CA } }
2022-11-24Merge branch 'T4825' of https://github.com/sever-sever/vyos-1x into t4825-vethChristian Poessinger
* 'T4825' of https://github.com/sever-sever/vyos-1x: T4825: Add basic smoketest for veth interfaces T4825: Add interface type veth
2022-11-24T4825: Add interface type vethViacheslav Hletenko
Add interface type veth (Virtual ethernet) One of the usecases it's interconnect different vrf's and default vrf via bridge set interfaces virtual-ethernet veth0 peer-name 'veth1010' set interfaces virtual-ethernet veth1010 address '10.0.0.10/24' set interfaces virtual-ethernet veth1010 peer-name 'veth0' set interfaces virtual-ethernet veth1010 vrf 'foo' set interfaces bridge br0 address '10.0.0.1/24' set interfaces bridge br0 member interface veth0
2022-11-20macvlan: pseudo-ethernet: T2104: _create() should place interface in A/D stateChristian Poessinger
2022-09-26ethernet: T4689: support asymetric RFS configuration on multiple interfacesChristian Poessinger
The initial implementation from commit ac4e07f9 ("rfs: T4689: Support RFS (Receive Flow Steering)") always adjusted the global rps_sock_flow_entries configuration. So if RFS was enabled for one NIC but not the other - it did not work. According to the documentation: RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on by default for SMP). The functionality remains disabled until explicitly configured. The number of entries in the global flow table is set through: /proc/sys/net/core/rps_sock_flow_entries The number of entries in the per-queue flow table are set through: /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt Both of these need to be set before RFS is enabled for a receive queue. Values for both are rounded up to the nearest power of two. The suggested flow count depends on the expected number of active connections at any given time, which may be significantly less than the number of open connections. We have found that a value of 32768 for rps_sock_flow_entries works fairly well on a moderately loaded server. This commit sets rps_sock_flow_entries via sysctl on bootup leafing the RFS configuration to the interface level.
2022-09-25wireguard: ifconfig: T2653: move Config() import to be local to consumerChristian Poessinger
2022-09-25wireguard: ifconfig: T2653: use NamedTemporaryFile() when dealing with ↵Christian Poessinger
private key This prevents habing any leftover private-key files in /tmp directory.
2022-09-24ethernet: T3171: enable RPS (Receive Packet Steering) for all RX queuesChristian Poessinger
The initial implementation in commit 9fb9e5cade ("ethernet: T3171: add CLI option to enable RPS (Receive Packet Steering)" only changed the CPU affinity for RX queue 0. This commit takes all RX queues into account.
2022-09-17wireguard: T4702: actively revoke peer if it gets disabledChristian Poessinger
When any configured peer is set to `disable` while the Wireguard tunnel is up and running it does not get actively revoked and removed. This poses a security risk as connections keep beeing alive. Whenever any parameter of a peer changes we actively remove the peer and fully recreate it on the fly.
2022-09-15ethernet: rfs: T4689: remove redundant codeChristian Poessinger
2022-09-15rfs: T4689: Support RFS(Receive Flow Steering)jack9603301
2022-09-12Revert "rfs: T4689: Support RFS(Receive Flow Steering)"Christian Poessinger
This reverts commit 53355271a2864d844daca89a064c21e514e10adb.
2022-09-12rfs: T4689: Support RFS(Receive Flow Steering)jack9603301
2022-09-02bonding: T4668: fix live bonding member add or removeinitramfs
Fixes several bugs around bonding member interface states not matching the committed configuration, including: - Disabled removed interfaces coming back up - Newly added disabled interfaces not staying down - Newly added interfaces not showing up in the bond
2022-08-29ethernet: T4653: bugfix copy-paste when processing NIC offloadingChristian Poessinger
Commit 31169fa8a763e ("vyos.ifconfig: T3619: only set offloading options if supported by NIC") added the new implementation which handles NIC offloading. Unfortunately every single implementation was copied from "gro" which resulted in a change to gro for each offloading option - thus options like lro, sg, tso had no effect at all. It all comes down to copy/paste errors ... one way or another.
2022-08-27pppoe: T4648: do not install IPv6 default route from RA is no-default-route ↵Christian Poessinger
is set Adds a sysctl parameter to ignore the default router obtained from router advertisements when pppoe no-default-route is set.
2022-08-25ifconfig: T2223: add vlan switch for Section.interfaces()Christian Poessinger
Sometimes we are only interested in the parent interfaces without any VLAN subinterfaces. Extend the API with a vlan argument that defaults to True to keep the current behavior in place.
2022-08-22bridge: T4632: vlan aware bridge lacks CPU forwardingChristian Poessinger
The VLAN aware bridge was forwarding traffic between member ports, but traffic destined torwards the CPU was dropped. This resulted in a gateway not reachable or DHCP leases that could not be handed out. Tested via: VyOS set interfaces bridge br0 enable-vlan set interfaces bridge br0 member interface eth1 allowed-vlan '10' set interfaces bridge br0 member interface eth1 allowed-vlan '20' set interfaces bridge br0 member interface eth1 allowed-vlan '30' set interfaces bridge br0 member interface eth1 allowed-vlan '40' set interfaces bridge br0 member interface eth1 native-vlan '40' set interfaces bridge br0 member interface eth2 allowed-vlan '30' set interfaces bridge br0 member interface eth2 allowed-vlan '20' set interfaces bridge br0 member interface eth2 allowed-vlan '10' set interfaces bridge br0 member interface eth2 allowed-vlan '40' set interfaces bridge br0 vif 10 address '10.0.10.1/24' set interfaces bridge br0 vif 20 address '10.0.20.1/24' set interfaces bridge br0 vif 30 address '10.0.30.1/24' set interfaces bridge br0 vif 40 address '10.0.40.1/24' Arista vEOS vlan 10,20,30,40 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 interface Vlan10 ip address 10.0.10.2/24 interface Vlan20 ip address 10.0.20.2/24 interface Vlan30 ip address 10.0.30.2/24 interface Vlan40 ip address 10.0.40.2/24 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk spanning-tree portfast Cisco vIOS interface GigabitEthernet0/0 ip address 10.0.40.3 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 10.0.10.3 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 10.0.20.3 255.255.255.0 ! interface GigabitEthernet0/0.30 encapsulation dot1Q 30 ip address 10.0.30.3 255.255.255.0 !
2022-08-01mtu: T4572: Add DHCP-option MTU to get values from DHCP-serverViacheslav Hletenko
Ability to get MTU from DHCP-server and don't touch it per any interface change if interface 'dhcp-options mtu' is configured
2022-07-30bridge: T4579: cleanup interface dict (remove empty keys)Christian Poessinger
2022-07-30bridge: T4579: remove duplicate code path already handled by base classChristian Poessinger
Interface() base class already takes care about VLAN creation/removal of newly added or no longer required interfaces. No need to code this logic again.
2022-07-15bond: T4525: fix adding member interface to bond after removing VRFChristian Poessinger
When removing a VRF from an ethernet interface and adding the interface to a bond in the same commit led to an OSError: [Errno 16] Device or resource busy!
2022-07-14interface: T4056: Fix unexpected delete tc qdiscDaniilHarun
2022-07-10bond: T4522: add ability to specify mii monitor interval via CLIChristian Poessinger
Linux Kernel supports to specify the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures. A value of zero disables MII link monitoring. A value of 100 is a good starting point. The default value is 100. set interfaces bonding bond0 mii-mon-interval <n>
2022-07-10bond: T1557: re-add miimon configuration - lost in translationChristian Poessinger
2022-07-10bond: T4521: ARP monitor interval is not configured despite set via CLIChristian Poessinger
The code path for changing the interval is never executed.
2022-07-09ip: T4517: add option to enable directed broadcast forwardingYuxiang Zhu
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644. By default Linux kernel doesn't forward directed broadcast packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding` and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
2022-07-01vti: T2455: add link-local IPv6 address supportChristian Poessinger
Interface should receive an auto generated link-local IPv6 address as we do with all VyOS interfaces by default.
2022-06-29bridge: add option to enable/disable IGMP/MLD snoopingYuxiang Zhu
This PR adds an config option to enable/disable IGMP/MLD snooping. ``` set interfaces bridge brN igmp snooping ```
2022-06-16vyos.ifconfig: T4384: fix file permission (664) on interface.pyChristian Poessinger
2022-04-21pppoe: T4384: replace default-route CLI option with common CLI nodes already ↵Christian Poessinger
present for DHCP VyOS 1.4 still leverages PPPd internals on the CLI. pppd supports three options for a default route, none, auto, force. * none: No default route is installed on interface up * auto: Default route is only installed if there is yet no default route * force: overwrite any default route There are several drawbacks in this design for VyOS and the users. If auto is specified, this only counted for static default routes - but what about dynamic ones? Same for force, only a static default route got replaced but dynamic ones did not got taken into account. The CLI is changed and we now re-use already existing nodes from the DHCP interface configuration: * no-default-route: On link up no default route is installed, same as the previous default-route none * default-route-distance: We can now specify the distance of this route for the routing table on the system. This defaults to 210 as we have for DHCP interfaces. All this will be migrated using a CLI migration script.
2022-04-21vyos.ifconfig: T4384: get_interface_dict() should provide "ifname" key for VIFsChristian Poessinger
2022-04-18vxlan: geneve: T4370: support configuration of DF bit optionChristian Poessinger
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit> set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
2022-04-16vyos.base: use Warning() helper where applicableChristian Poessinger
2022-04-16dhcp(v6)-client: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-11T4327: ignore PermissionError caused by ethtool spee/duplex/autoneg settingDaniil Baturin
Certain NICs seem to fail to report that they don't support speed/duplex setting, so they look as if it's supported, but the command fails in practice. It's probably better to preserve a working config in that case.
2022-04-07ipv6: T4346: delete (migrate) CLI command to disable IPv6 address familyChristian Poessinger
2022-04-07qos: T4284: verify mirror/redirect target interface existsChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on vlan subinterfacesChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on all interface typesChristian Poessinger
2022-04-05interfaces: T4331: Fix assign link-local static IPv6 addr to vrfViacheslav Hletenko
If we have link-local static address and vrf, for example: set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64' set interfaces ethernet eth2 vrf 'foo' This IPv6 address was assigned before vrf, as result after attaching the intreface to vrf we lose this static linklocal address DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2' DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo' DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2' This commit fixes this, the address is assigned after vrf assign
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 16:01:04 +0000