summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig
AgeCommit message (Collapse)Author
2024-04-03T6199: drop unused Python importsChristian Breunig
found using "git ls-files *.py | xargs pylint | grep W0611" (cherry picked from commit 274b2da242acd1f1f64ff1dee471e34295137c5f)
2024-04-03T6199: replace netifaces.interfaces() with common custom helpersChristian Breunig
* Use interface_exists() outside of verify() * Use verify_interface_exists() in verify() to drop common error message (cherry picked from commit 4c7c168fe970b807750a05ceb66b70c0d8652535)
2024-04-02vrf: T3655: always use full nft command name (e.g. --check over -c)Christian Breunig
(cherry picked from commit 09ac2851f89f2b7d94a21c3506e46f380e961fba)
2024-04-01dhcpv6-client: T2590: fix vyos-hostsd update for nameserver and search domainsChristian Breunig
After migrating from ISC DHCLIENT for IPv6 to wide-dhcp-client the logic which was present to update /etc/resolv.conf with the DHCP specified nameservers and also the search domain list was no longer present. This commit adds a per interface rendered script to inform vyos-hostsd about the received IPv6 nameservers and search domains. (cherry picked from commit ece425f0191762638b7c967097accd8739e9103d)
2024-03-24Merge pull request #3163 from vyos/mergify/bp/sagitta/pr-3157Viacheslav Hletenko
vti: T6085: bring VTI interfaces up only when the IPsec tunnel is up (backport #3157)
2024-03-24Revert "ethernet: T5566: disable energy efficient ethernet (EEE) for interfaces"Christian Breunig
This reverts commit ab30509b25d54dac99294b76ba03fd49c3d2c946. As in T6152 there seem to be some NICs that have a non working implementation of reading the EEE registers. Remove this feature in the meantime until there is a less exploding solution hindering boards to boot. Return to Kernel defaults by removing this code path. (cherry picked from commit 946f93778f15f4af9f31cd5b164efcd931693635)
2024-03-21vti: T6085: interface is always down and only enabled by IPSec daemonChristian Breunig
When a VTI interface is just created, it is in ADMIN UP state by default, even if an IPSec peer is not connected. After the peer is disconnected the interface goes to DOWN state as expected. This breaks routing logic - for example, static routes through VTI interfaces will be active even if a peer is not connected. This changes to logic so ADMIN UP/DOWN state can only be changed by the vti-up-down helper script. Error was introduced during the Perl -> Python migration and move to the generic vyos.ifconfig abstraction during the 1.4 development cycle. (cherry picked from commit 9eb018c4935235d292d7c693ac15da5761be064a)
2024-03-21bridge: T6125: support 802.1ad (ethertype 0x88a8) VLAN filteringChristian Breunig
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType value of 0x88A8 is required. Reusing CLI command from VIF-S (QinQ) interfaces: set interfaces bridge br0 protocol 802.1ad (cherry picked from commit 9c9b1febff6863ccd3632a04d9e307909b3efe7a)
2024-01-23ethernet: T5978: hw-tc-offload does not actually get enabled on the NICChristian Breunig
Typo (missaligned -/_) in the code causes hw-tc-offload to never be enabled in the underlaying hardware via ethtool. (cherry picked from commit bfb7e4f2b3743ae3c9a132daf4e2109e90d27f26)
2024-01-18ethernet: T4638: deleting parent interface does not delete underlying VIFsChristian Breunig
(cherry picked from commit 7ba47f027f3a9441125c13a927eb23cee2de041b)
2024-01-11Merge pull request #2793 from sarthurdev/T5550_sagittaChristian Breunig
interface: T5550: Interface source-validation priority over global value (backport)
2024-01-01T5474: establish common file name pattern for XML conf mode commandsChristian Breunig
We will use _ as CLI level divider. The XML definition filename and also the Python helper should match the CLI node. Example: set interfaces ethernet -> interfaces_ethernet.xml.in set interfaces bond -> interfaces_bond.xml.in set service dhcp-server -> service_dhcp-server-xml.in (cherry picked from commit 4ef110fd2c501b718344c72d495ad7e16d2bd465)
2023-12-25ethernet: T5566: disable energy efficient ethernet (EEE) for interfacesChristian Breunig
VyOS is a routing (packet pushing) platform, thus supporting EEE which potentially causes issues is not a good idea. Some recent Intel drivers enable EEE by default, thus we will disable this for every NIC supporting EEE. (cherry picked from commit ab30509b25d54dac99294b76ba03fd49c3d2c946)
2023-12-14T5749: Add a more scrict search for get_vrf methodViacheslav Hletenko
The current implementation is wrong as it searches `master` in the iproute2 JSON output. It is a worng as it could include bridges or bonding interfaces Add the more strict search `info_slave_kind == vrf` (cherry picked from commit 2ebac5af10a36668ed3b8cfa6e5a9f61cf5d1068)
2023-11-22vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069 (cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
2023-11-22Merge pull request #2520 from vyos/mergify/bp/sagitta/pr-2518Daniil Baturin
T5770 Enable MACsec encryption stanza (backport #2518)
2023-11-21macsec: T5770: enable iproute2 "encrypt on" stanzaGiga Murphy
(cherry picked from commit a7a90e81ad03ec33acb32beeab71dbd5f27a2044)
2023-11-21T5419: firewall: backport firewall flowtable to Sagitta.Nicolas Fort
2023-11-16tunnel: T3894: improve get_mac_synthetic() codeChristian Breunig
Remove stray whitespace in sed script and call Section.interfaces with vlan=False instead of a custom filter. This extends commit f19c92f25 ("tunnel: T3894: fix design when building synthetic MAC addresses") (cherry picked from commit c8ba5dccfa9b02533c6536903ecacd3ddb04351e)
2023-11-16T5747: op-mode add MAC and MTU for show interfaces summaryViacheslav Hletenko
Add op-mode "show interfaces summary" Add MAC, VRF and MTU options: vyos@r4# run show interfaces summary Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address MAC VRF MTU S/L Description ----------- ----------------- ----------------- ------- ----- ----- ------------- dum0 203.0.113.1/32 96:44:ad:c5:a1:a5 default 1500 u/u eth0 192.168.122.14/24 52:54:00:f1:fd:77 default 1500 u/u WAN eth1 192.0.2.1/24 52:54:00:04:33:2b foo 1500 u/u LAN-eth1 eth2 - 52:54:00:40:2e:af default 1504 u/u LAN-eth2 eth3 - 52:54:00:09:a4:b4 default 1500 A/D (cherry picked from commit dc3906f04fbfe8014531e092a77c1c8c2d10dfe0)
2023-11-03wireguard: T5707: remove previously deconfigured peerChristian Breunig
Changing the public key of a peer (updating the key material) left the old WireGuard peer in place, as the key removal command used the new key. WireGuard only supports peer removal based on the configured public-key, by deleting the entire interface this is the shortcut instead of parsing out all peers and removing them one by one. Peer reconfiguration will always come with a short downtime while the WireGuard interface is recreated. (cherry picked from commit 2fc8738bc9c2fb6364a22d86079e8635cee91949)
2023-10-31vxlan: T5668: add CLI knob to enable ARP/ND suppressionChristian Breunig
In order to minimize the flooding of ARP and ND messages in the VXLAN network, EVPN includes provisions [1] that allow participating VTEPs to suppress such messages in case they know the MAC-IP binding and can reply on behalf of the remote host. In Linux, the above is implemented in the bridge driver using a per-port option called "neigh_suppress" that was added in kernel version 4.15. [1] https://www.rfc-editor.org/rfc/rfc7432#section-10 (cherry picked from commit ec9a95502daa88b9632af12524e7cefebf86bab6)
2023-10-30vxlan: T5699: migrate "external" CLI know to "parameters external"Christian Breunig
As we have a bunch of options under "paramteres" already and "external" is clearly one of them it should be migrated under that node as well. (cherry picked from commit cc7ba8824a5e9ec818f0bbe7fb85e1713a591527)
2023-10-22bonding: T5254: Fixed changing ethernet when it is a bond memberaapostoliuk
If ethernet interface is a bond memeber: 1. Allow for changing only specific parameters which are specified in EthernetIf.get_bond_member_allowed_options function. 2. Added inheritable parameters from bond interface to ethernet interface which are scpecified in BondIf.get_inherit_bond_options. Users can change inheritable options under ethernet interface but in commit it will be copied from bond interface. 3. All other parameters are denied for changing. Added migration script. It deletes all denied parameters under ethernet interface if it is a bond member. (cherry picked from commit aa0282ceb379df1ab3cc93e4bd019134d37f0d89)
2023-09-09vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridgesChristian Breunig
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI is configured against a container VXLAN interface which is referred to as a 'Single VXLAN device (SVD)'. Multiple VLAN to VNI mappings can be configured against the same SVD. This allows for a significant scaling of the number of VNIs since a separate VXLAN interface is no longer required for each VNI. Sample configuration of SVD with VLAN to VNI mappings is shown below. set interfaces bridge br0 member interface vxlan0 set interfaces vxlan vxlan0 external set interfaces vxlan vxlan0 source-interface 'dum0' set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010' set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011' set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030' set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031' (cherry picked from commit 7f6624f5a6f8bd1749b54103ea5ec9f010adf778)
2023-09-06interface: T5550: Interface source-validation priority over global valuesarthurdev
- Migrate IPv4 source-validation to nftables - Interface source-validation value takes priority, fallback to global value
2023-08-25interface: T3509: Add per-interface IPv6 source validationsarthurdev
2023-08-23Merge pull request #2156 from giga1699/T5447Christian Breunig
T5447: Initial support for MACsec static keys
2023-08-20T5447: Remove redundant self.set_admin_stateGiga Murphy
2023-08-20T5447: Update copyright yearsGiga Murphy
2023-08-20T5447: Corrected comment in _create headerGiga Murphy
2023-08-20T5447: Corrected comment for interface downGiga Murphy
2023-08-20T5447: Implement maintainer feedbackGiga Murphy
2023-08-18T5447: Initial support for MACsec static keysGiga Murphy
2023-08-17Merge pull request #2130 from aapostoliuk/T5409-sagittaChristian Breunig
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
2023-08-17wireguard: T5409: rename threaded CLI not to per-client-threadChristian Breunig
Using threaded as CLI node is a very deep term used by kernel threads. To make this more understandable to users, rename the node to per-client-thread. It's also not necessary to test if any one peer is configured and probing if the option is set. There is a base test which requires at least one peer to be configured.
2023-08-11ipv6: T5464: add support for per-interface dad (duplicate address detection) ↵Christian Breunig
setting
2023-08-11ipv6: T5464: use proper XML default for DAD transmitsChristian Breunig
This is only a cosmetic change so that the default value is properly retrieved from the defaultValue XML node.
2023-08-07dhcp(v6): T5428: add proper return statements in set_dhcp(v6) methodsChristian Breunig
2023-08-07wireguard: T5409: Added 'set interfaces wireguard wgX threaded'aapostoliuk
Added 'set interfaces wireguard wgX threaded' command. Process traffic from each peer in a dedicated thread.
2023-08-06T5195: move helpers from vyos.validate to vyos.utils packageChristian Breunig
2023-08-05dhcpv6: T5428: client renewal fails when running inside VRFChristian Breunig
2023-08-04dhcp: T5428: client renewal fails when running inside VRFChristian Breunig
vyos@vyos# run show vrf MGMT processes 2282 sshd There is no dhclient process running in given VRF. dhclient complains it can not send out packets via the given interface (as it's not bound to that VRF) Aug 02 20:29:54 dhclient[1686]: send_packet: Network is unreachable Aug 02 20:29:54 dhclient[1686]: send_packet: please consult README file regarding broadcast address. Aug 02 20:29:54 dhclient[1686]: dhclient.c:3001: Failed to send 300 byte long packet over fallback interface.
2023-08-04dhcp: T5428: provide common direcotry path via vyos.defaults.directoriesChristian Breunig
Multiple scripts use the same hardcoded path for DHCP client leases in different direcotries - this can't be worse.
2023-07-31dhcpv6-pd: T5387: add support for no-release flag1vivy
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit. vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP] * Todo: render Jinja2 template and fill it vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n dhcpv6-client: T5387: fix missing / from filepaths
2023-07-15T5195: vyos.util -> vyos.utils package refactoring part #2Christian Breunig
2023-07-14T5195: vyos.util -> vyos.utils package refactoring (#2093)Christian Breunig
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process * T5195: use read_file and write_file implementation from vyos.utils.file Changed code automatically using: find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} + find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} + * T5195: move chmod* helpers to vyos.utils.permission * T5195: use colon_separated_to_dict from vyos.utils.dict * T5195: move is_systemd_service_* to vyos.utils.process * T5195: fix boot issues with missing imports * T5195: move dict_search_* helpers to vyos.utils.dict * T5195: move network helpers to vyos.utils.network * T5195: move commit_* helpers to vyos.utils.commit * T5195: move user I/O helpers to vyos.utils.io
2023-07-05geneve: T5339: add option to use ipv4 instead of ethernetfett0
2023-06-12T5286: drop XDP support for ethernet and bonding interfacesChristian Breunig
... this is a step towards a new and better implementation that will utilize VPP.
2023-05-29ifconfig: T2104: use link_local_prefix literal for fe80::/64Christian Breunig
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 11:07:31 +0000