| Age | Commit message (Collapse) | Author |
|---|
|
vxlan: T5753: add support for VNI filtering
|
|
|
|
In a service provider network a service provider typically supports multiple
bridge domains with overlapping vlans. One bridge domain per customer. Vlans in
each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to
each customer.
Without the ability of VNI filtering, we can not provide VXLAN tunnels
with multiple tenants all requiring e.g. VLAN 10.
To Test:
set interfaces vxlan vxlan987 parameters external
set interfaces vxlan vxlan987 source-interface eth0
set interfaces vxlan vxlan987 parameters vni-filter
set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050
set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051
set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052
set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053
set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054
set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060
set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069
set interfaces bridge br0 member interface vxlan987
Add new op-mode command: show bridge vni
Interface VNI
----------- -----------
vxlan987 10050-10054
vxlan987 10060
vxlan987 10069
|
|
Remove stray whitespace in sed script and call Section.interfaces with
vlan=False instead of a custom filter.
This extends commit f19c92f25 ("tunnel: T3894: fix design when building
synthetic MAC addresses")
|
|
Add op-mode "show interfaces summary"
Add MAC, VRF and MTU options:
vyos@r4# run show interfaces summary
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address MAC VRF MTU S/L Description
----------- ----------------- ----------------- ------- ----- ----- -------------
dum0 203.0.113.1/32 96:44:ad:c5:a1:a5 default 1500 u/u
eth0 192.168.122.14/24 52:54:00:f1:fd:77 default 1500 u/u WAN
eth1 192.0.2.1/24 52:54:00:04:33:2b foo 1500 u/u LAN-eth1
eth2 - 52:54:00:40:2e:af default 1504 u/u LAN-eth2
eth3 - 52:54:00:09:a4:b4 default 1500 A/D
|
|
Changing the public key of a peer (updating the key material) left the old
WireGuard peer in place, as the key removal command used the new key.
WireGuard only supports peer removal based on the configured public-key, by
deleting the entire interface this is the shortcut instead of parsing out all
peers and removing them one by one.
Peer reconfiguration will always come with a short downtime while the WireGuard
interface is recreated.
|
|
vxlan: T5668: add CLI knob to enable ARP/ND suppression
|
|
As we have a bunch of options under "paramteres" already and "external" is
clearly one of them it should be migrated under that node as well.
|
|
In order to minimize the flooding of ARP and ND messages in the VXLAN network,
EVPN includes provisions [1] that allow participating VTEPs to suppress such
messages in case they know the MAC-IP binding and can reply on behalf of the
remote host. In Linux, the above is implemented in the bridge driver using a
per-port option called "neigh_suppress" that was added in kernel version 4.15.
[1] https://www.rfc-editor.org/rfc/rfc7432#section-10
|
|
If ethernet interface is a bond memeber:
1. Allow for changing only specific parameters which are specified
in EthernetIf.get_bond_member_allowed_options function.
2. Added inheritable parameters from bond interface to ethernet
interface which are scpecified
in BondIf.get_inherit_bond_options.
Users can change inheritable options under ethernet interface
but in commit it will be copied from bond interface.
3. All other parameters are denied for changing.
Added migration script. It deletes all denied parameters under
ethernet interface if it is a bond member.
|
|
supports HW flowtable offload
- Add required offload setting for interfaces + flowtable offload (hw-tc-offload)
- Verification of interface support for hardware offloaded flowtables
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
|
|
- Migrate IPv4 source-validation to nftables
- Interface source-validation value takes priority, fallback to global value
|
|
|
|
|
|
https://github.com/sever-sever/vyos-1x into netns
* 'T5241-control-edition' of https://github.com/sever-sever/vyos-1x:
T5241: Support netns for veth and dummy interfaces
|
|
|
|
T5447: Initial support for MACsec static keys
|
|
|
|
|
|
|
|
|
|
|
|
|
|
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
|
|
Using threaded as CLI node is a very deep term used by kernel threads. To make
this more understandable to users, rename the node to per-client-thread.
It's also not necessary to test if any one peer is configured and probing if
the option is set. There is a base test which requires at least one peer
to be configured.
|
|
setting
|
|
This is only a cosmetic change so that the default value is properly retrieved
from the defaultValue XML node.
|
|
|
|
Added 'set interfaces wireguard wgX threaded' command.
Process traffic from each peer in a dedicated thread.
|
|
|
|
|
|
vyos@vyos# run show vrf MGMT processes
2282 sshd
There is no dhclient process running in given VRF. dhclient complains it can
not send out packets via the given interface (as it's not bound to that VRF)
Aug 02 20:29:54 dhclient[1686]: send_packet: Network is unreachable
Aug 02 20:29:54 dhclient[1686]: send_packet: please consult README file regarding broadcast address.
Aug 02 20:29:54 dhclient[1686]: dhclient.c:3001: Failed to send 300 byte long packet over fallback interface.
|
|
Multiple scripts use the same hardcoded path for DHCP client leases in
different direcotries - this can't be worse.
|
|
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit.
vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP]
* Todo: render Jinja2 template and fill it
vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli
vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag
vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n
dhcpv6-client: T5387: fix missing / from filepaths
|
|
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
|
|
... this is a step towards a new and better implementation that will utilize
VPP.
|
|
Add netns configuration for dummy and virtual-ethernet interfaces
Change Interface class to get/set data to netns
|
|
|
|
Revert "veth: T3829: Allow moving veth into netns"
|
|
netns management for any Vyos interfaces doesn't work past the initial
creation, because Vyos always tries to recreate it/move it into the
netns even though it already exists. Until this is fixed, don't let
anyone even attempt to use this:
set interfaces virtual-ethernet veth10 peer-name 'veth100'
set interfaces virtual-ethernet veth100 netns 'ns01'
set interfaces virtual-ethernet veth100 peer-name 'veth10'
set netns name ns01
commit
vyos@r14# sudo ip netns exec ns01 ip link show
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
12: veth100@if13: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ee:8f:0b:bd:a2:f8 brd ff:ff:ff:ff:ff:ff link-netnsid 0
[edit]
vyos@r14#
set interfaces virtual-ethernet veth100 description MyNetns
commit
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/interfaces-virtual-ethernet.py", line 111, in <module>
apply(c)
File "/usr/libexec/vyos/conf_mode/interfaces-virtual-ethernet.py", line 101, in apply
p.update(veth)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 1413, in update
self.set_netns(config.get('netns', ''))
File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 552, in set_netns
self.set_interface('netns', netns)
File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 183, in set_interface
return self._set_command(self.config, name, value)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 110, in _set_command
return self._command_set[name].get('format', lambda _: _)(self._cmd(cmd))
^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 52, in _cmd
return cmd(command, self.debug)
^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/vyos/util.py", line 161, in cmd
raise OSError(code, feedback)
PermissionError: [Errno 1] failed to run command: ip link set dev veth100 netns ns01
returned:
exit code: 1
noteworthy:
cmd 'ip link set dev veth100 netns ns01'
returned (out):
returned (err):
Cannot find device "veth100"
This reverts commit f5cc8453860568351cd9b3b7a05d06e1462460e8.
|
|
There is no need for the backend code to call ethtool and try to change speed or
duplex settings every time there is a change in the interface configuration,
but no change for the speed/duplex subnodes. This also makes the commit itself
faster when working with ethernet interfaces.
Bonus: no repeating CLI messages that the driver does not support speed/duplex
changes, as we do not change anything here.
Extension to commit f2ecc9710 ("ethernet: T3891: honor auto-negotiation support
per NIC")
|
|
This makes netns infinitely more useful as they can be chained together
in many ways to build complex network structures all on the host.
Signed-off-by: Joe Groocock <me@frebib.net>
|
|
Not all drivers/NICs or combination of NIC + transceiver support auto-
negotiation. The current auto-negotiation capability is evaluated and taken
into account when applying spped/duplex settings. If auto-negotiation is
not supported - we skip the setting to avoid errors during configuration.
|
|
VLANIf('eth0.10').remove() will create and remove the VLAN in one command.
Thus one can ensure when calling remove() on a VLAN it will always
succeed.
|
|
|
|
Tunnel interface multicast settings can be "enabled or disabled". As we prefer
valueless nodes, and the linux kernel default is "disabled" we should add a
set interfaces tunnel tunXX enable-multicast
command
|
|
Multicast has not been implemented for the tunnel interfaces.
We have only configuration CLI commands that do anything.
Fix it.
ip link set dev <tag> multicast on
ip link set dev <tag> multicast off
|
