summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig
AgeCommit message (Collapse)Author
2023-09-19firewall: ethernet: T4502: Add interface offload node and verify interface ↵sarthurdev
supports HW flowtable offload - Add required offload setting for interfaces + flowtable offload (hw-tc-offload) - Verification of interface support for hardware offloaded flowtables
2023-09-09vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridgesChristian Breunig
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI is configured against a container VXLAN interface which is referred to as a 'Single VXLAN device (SVD)'. Multiple VLAN to VNI mappings can be configured against the same SVD. This allows for a significant scaling of the number of VNIs since a separate VXLAN interface is no longer required for each VNI. Sample configuration of SVD with VLAN to VNI mappings is shown below. set interfaces bridge br0 member interface vxlan0 set interfaces vxlan vxlan0 external set interfaces vxlan vxlan0 source-interface 'dum0' set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010' set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011' set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030' set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
2023-09-05interface: T5550: Interface source-validation priority over global valuesarthurdev
- Migrate IPv4 source-validation to nftables - Interface source-validation value takes priority, fallback to global value
2023-09-05netns: T5241: simplify network namespace handlingChristian Breunig
2023-09-03netns: T5241: provide is_netns_interface utility helperChristian Breunig
2023-09-03Merge branch 'T5241-control-edition' of ↵Christian Breunig
https://github.com/sever-sever/vyos-1x into netns * 'T5241-control-edition' of https://github.com/sever-sever/vyos-1x: T5241: Support netns for veth and dummy interfaces
2023-08-25interface: T3509: Add per-interface IPv6 source validationsarthurdev
2023-08-23Merge pull request #2156 from giga1699/T5447Christian Breunig
T5447: Initial support for MACsec static keys
2023-08-20T5447: Remove redundant self.set_admin_stateGiga Murphy
2023-08-20T5447: Update copyright yearsGiga Murphy
2023-08-20T5447: Corrected comment in _create headerGiga Murphy
2023-08-20T5447: Corrected comment for interface downGiga Murphy
2023-08-20T5447: Implement maintainer feedbackGiga Murphy
2023-08-18T5447: Initial support for MACsec static keysGiga Murphy
2023-08-17Merge pull request #2130 from aapostoliuk/T5409-sagittaChristian Breunig
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
2023-08-17wireguard: T5409: rename threaded CLI not to per-client-threadChristian Breunig
Using threaded as CLI node is a very deep term used by kernel threads. To make this more understandable to users, rename the node to per-client-thread. It's also not necessary to test if any one peer is configured and probing if the option is set. There is a base test which requires at least one peer to be configured.
2023-08-11ipv6: T5464: add support for per-interface dad (duplicate address detection) ↵Christian Breunig
setting
2023-08-11ipv6: T5464: use proper XML default for DAD transmitsChristian Breunig
This is only a cosmetic change so that the default value is properly retrieved from the defaultValue XML node.
2023-08-07dhcp(v6): T5428: add proper return statements in set_dhcp(v6) methodsChristian Breunig
2023-08-07wireguard: T5409: Added 'set interfaces wireguard wgX threaded'aapostoliuk
Added 'set interfaces wireguard wgX threaded' command. Process traffic from each peer in a dedicated thread.
2023-08-06T5195: move helpers from vyos.validate to vyos.utils packageChristian Breunig
2023-08-05dhcpv6: T5428: client renewal fails when running inside VRFChristian Breunig
2023-08-04dhcp: T5428: client renewal fails when running inside VRFChristian Breunig
vyos@vyos# run show vrf MGMT processes 2282 sshd There is no dhclient process running in given VRF. dhclient complains it can not send out packets via the given interface (as it's not bound to that VRF) Aug 02 20:29:54 dhclient[1686]: send_packet: Network is unreachable Aug 02 20:29:54 dhclient[1686]: send_packet: please consult README file regarding broadcast address. Aug 02 20:29:54 dhclient[1686]: dhclient.c:3001: Failed to send 300 byte long packet over fallback interface.
2023-08-04dhcp: T5428: provide common direcotry path via vyos.defaults.directoriesChristian Breunig
Multiple scripts use the same hardcoded path for DHCP client leases in different direcotries - this can't be worse.
2023-07-31dhcpv6-pd: T5387: add support for no-release flag1vivy
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit. vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP] * Todo: render Jinja2 template and fill it vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n dhcpv6-client: T5387: fix missing / from filepaths
2023-07-15T5195: vyos.util -> vyos.utils package refactoring part #2Christian Breunig
2023-07-14T5195: vyos.util -> vyos.utils package refactoring (#2093)Christian Breunig
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process * T5195: use read_file and write_file implementation from vyos.utils.file Changed code automatically using: find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} + find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} + * T5195: move chmod* helpers to vyos.utils.permission * T5195: use colon_separated_to_dict from vyos.utils.dict * T5195: move is_systemd_service_* to vyos.utils.process * T5195: fix boot issues with missing imports * T5195: move dict_search_* helpers to vyos.utils.dict * T5195: move network helpers to vyos.utils.network * T5195: move commit_* helpers to vyos.utils.commit * T5195: move user I/O helpers to vyos.utils.io
2023-07-05geneve: T5339: add option to use ipv4 instead of ethernetfett0
2023-06-12T5286: drop XDP support for ethernet and bonding interfacesChristian Breunig
... this is a step towards a new and better implementation that will utilize VPP.
2023-06-03T5241: Support netns for veth and dummy interfacesViacheslav Hletenko
Add netns configuration for dummy and virtual-ethernet interfaces Change Interface class to get/set data to netns
2023-05-29ifconfig: T2104: use link_local_prefix literal for fe80::/64Christian Breunig
2023-05-14Merge pull request #2007 from frebib/veth-netns-revertChristian Breunig
Revert "veth: T3829: Allow moving veth into netns"
2023-05-14Revert "veth: T3829: Allow moving veth into netns"Joe Groocock
netns management for any Vyos interfaces doesn't work past the initial creation, because Vyos always tries to recreate it/move it into the netns even though it already exists. Until this is fixed, don't let anyone even attempt to use this: set interfaces virtual-ethernet veth10 peer-name 'veth100' set interfaces virtual-ethernet veth100 netns 'ns01' set interfaces virtual-ethernet veth100 peer-name 'veth10' set netns name ns01 commit vyos@r14# sudo ip netns exec ns01 ip link show 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 12: veth100@if13: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ee:8f:0b:bd:a2:f8 brd ff:ff:ff:ff:ff:ff link-netnsid 0 [edit] vyos@r14# set interfaces virtual-ethernet veth100 description MyNetns commit Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/interfaces-virtual-ethernet.py", line 111, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-virtual-ethernet.py", line 101, in apply p.update(veth) File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 1413, in update self.set_netns(config.get('netns', '')) File "/usr/lib/python3/dist-packages/vyos/ifconfig/interface.py", line 552, in set_netns self.set_interface('netns', netns) File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 183, in set_interface return self._set_command(self.config, name, value) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 110, in _set_command return self._command_set[name].get('format', lambda _: _)(self._cmd(cmd)) ^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/vyos/ifconfig/control.py", line 52, in _cmd return cmd(command, self.debug) ^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/vyos/util.py", line 161, in cmd raise OSError(code, feedback) PermissionError: [Errno 1] failed to run command: ip link set dev veth100 netns ns01 returned: exit code: 1 noteworthy: cmd 'ip link set dev veth100 netns ns01' returned (out): returned (err): Cannot find device "veth100" This reverts commit f5cc8453860568351cd9b3b7a05d06e1462460e8.
2023-05-12ethernet: T3891: add conditional code-path when doing speed/duplex changesChristian Breunig
There is no need for the backend code to call ethtool and try to change speed or duplex settings every time there is a change in the interface configuration, but no change for the speed/duplex subnodes. This also makes the commit itself faster when working with ethernet interfaces. Bonus: no repeating CLI messages that the driver does not support speed/duplex changes, as we do not change anything here. Extension to commit f2ecc9710 ("ethernet: T3891: honor auto-negotiation support per NIC")
2023-05-10veth: T3829: Allow moving veth into netnsJoe Groocock
This makes netns infinitely more useful as they can be chained together in many ways to build complex network structures all on the host. Signed-off-by: Joe Groocock <me@frebib.net>
2023-05-04ethernet: T3891: honor auto-negotiation support per NICChristian Breunig
Not all drivers/NICs or combination of NIC + transceiver support auto- negotiation. The current auto-negotiation capability is evaluated and taken into account when applying spped/duplex settings. If auto-negotiation is not supported - we skip the setting to avoid errors during configuration.
2023-04-15vyos.ifconfig: T2104: support adding and removing VLANs in one call.Christian Breunig
VLANIf('eth0.10').remove() will create and remove the VLAN in one command. Thus one can ensure when calling remove() on a VLAN it will always succeed.
2023-03-28interfaces: T4885: fix Perl to Python rewrite of clear/reset_countersJohn Estabrook
2023-02-25tunnel: T5034: migrate "multicast enable" CLI node to enable-multicastChristian Breunig
Tunnel interface multicast settings can be "enabled or disabled". As we prefer valueless nodes, and the linux kernel default is "disabled" we should add a set interfaces tunnel tunXX enable-multicast command
2023-02-20T5007: Fix multicast implementation for the tunnel interfacesViacheslav Hletenko
Multicast has not been implemented for the tunnel interfaces. We have only configuration CLI commands that do anything. Fix it. ip link set dev <tag> multicast on ip link set dev <tag> multicast off
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-09vyos.ifconfig: T1579: improve source-validation warningChristian Breunig
Inform user about the interface where the warning occured.
2023-01-17ifb: T4938: add Python implementation for input function block interfacesChristian Breunig
2023-01-13ethernet: rps: T4928: adjust to Kernel ABI changes #2Christian Breunig
Fix ValueError: Unknown format code 'x' for object of type 'str' added in commit c0ffb8ba4e663 ("ethernet: rps: T4928: adjust to Kernel ABI changes").
2023-01-12ethernet: rps: T4928: adjust to Kernel ABI changesChristian Breunig
In the past we could simply set all bits for all CPUs even if they did not exist. With 6.1.y Kernel series this is no longer possible and the input data is validated against the available number of CPUs.
2022-12-11sstp: T4384: initial implementation of SSTP client CLIChristian Poessinger
vyos@vyos# show interfaces sstpc sstpc sstpc10 { authentication { password vyos user vyos } server sstp.vyos.net ssl { ca-certificate VyOS-CA } }
2022-11-24Merge branch 'T4825' of https://github.com/sever-sever/vyos-1x into t4825-vethChristian Poessinger
* 'T4825' of https://github.com/sever-sever/vyos-1x: T4825: Add basic smoketest for veth interfaces T4825: Add interface type veth
2022-11-24T4825: Add interface type vethViacheslav Hletenko
Add interface type veth (Virtual ethernet) One of the usecases it's interconnect different vrf's and default vrf via bridge set interfaces virtual-ethernet veth0 peer-name 'veth1010' set interfaces virtual-ethernet veth1010 address '10.0.0.10/24' set interfaces virtual-ethernet veth1010 peer-name 'veth0' set interfaces virtual-ethernet veth1010 vrf 'foo' set interfaces bridge br0 address '10.0.0.1/24' set interfaces bridge br0 member interface veth0
2022-11-20macvlan: pseudo-ethernet: T2104: _create() should place interface in A/D stateChristian Poessinger
2022-09-26ethernet: T4689: support asymetric RFS configuration on multiple interfacesChristian Poessinger
The initial implementation from commit ac4e07f9 ("rfs: T4689: Support RFS (Receive Flow Steering)") always adjusted the global rps_sock_flow_entries configuration. So if RFS was enabled for one NIC but not the other - it did not work. According to the documentation: RFS is only available if the kconfig symbol CONFIG_RPS is enabled (on by default for SMP). The functionality remains disabled until explicitly configured. The number of entries in the global flow table is set through: /proc/sys/net/core/rps_sock_flow_entries The number of entries in the per-queue flow table are set through: /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt Both of these need to be set before RFS is enabled for a receive queue. Values for both are rounded up to the nearest power of two. The suggested flow count depends on the expected number of active connections at any given time, which may be significantly less than the number of open connections. We have found that a value of 32768 for rps_sock_flow_entries works fairly well on a moderately loaded server. This commit sets rps_sock_flow_entries via sysctl on bootup leafing the RFS configuration to the interface level.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 14:41:14 +0000