summaryrefslogtreecommitdiff
path: root/python/vyos/ifconfig
AgeCommit message (Collapse)Author
2022-07-01vti: T2455: add link-local IPv6 address supportChristian Poessinger
Interface should receive an auto generated link-local IPv6 address as we do with all VyOS interfaces by default.
2022-06-29bridge: add option to enable/disable IGMP/MLD snoopingYuxiang Zhu
This PR adds an config option to enable/disable IGMP/MLD snooping. ``` set interfaces bridge brN igmp snooping ```
2022-06-16vyos.ifconfig: T4384: fix file permission (664) on interface.pyChristian Poessinger
2022-04-21pppoe: T4384: replace default-route CLI option with common CLI nodes already ↵Christian Poessinger
present for DHCP VyOS 1.4 still leverages PPPd internals on the CLI. pppd supports three options for a default route, none, auto, force. * none: No default route is installed on interface up * auto: Default route is only installed if there is yet no default route * force: overwrite any default route There are several drawbacks in this design for VyOS and the users. If auto is specified, this only counted for static default routes - but what about dynamic ones? Same for force, only a static default route got replaced but dynamic ones did not got taken into account. The CLI is changed and we now re-use already existing nodes from the DHCP interface configuration: * no-default-route: On link up no default route is installed, same as the previous default-route none * default-route-distance: We can now specify the distance of this route for the routing table on the system. This defaults to 210 as we have for DHCP interfaces. All this will be migrated using a CLI migration script.
2022-04-21vyos.ifconfig: T4384: get_interface_dict() should provide "ifname" key for VIFsChristian Poessinger
2022-04-18vxlan: geneve: T4370: support configuration of DF bit optionChristian Poessinger
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit> set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
2022-04-16vyos.base: use Warning() helper where applicableChristian Poessinger
2022-04-16dhcp(v6)-client: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-11T4327: ignore PermissionError caused by ethtool spee/duplex/autoneg settingDaniil Baturin
Certain NICs seem to fail to report that they don't support speed/duplex setting, so they look as if it's supported, but the command fails in practice. It's probably better to preserve a working config in that case.
2022-04-07ipv6: T4346: delete (migrate) CLI command to disable IPv6 address familyChristian Poessinger
2022-04-07qos: T4284: verify mirror/redirect target interface existsChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on vlan subinterfacesChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on all interface typesChristian Poessinger
2022-04-05interfaces: T4331: Fix assign link-local static IPv6 addr to vrfViacheslav Hletenko
If we have link-local static address and vrf, for example: set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64' set interfaces ethernet eth2 vrf 'foo' This IPv6 address was assigned before vrf, as result after attaching the intreface to vrf we lose this static linklocal address DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2' DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo' DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2' This commit fixes this, the address is assigned after vrf assign
2022-03-31vyos.ifconfig: T4330: MTU must be configured prior to any IPv6 option changeChristian Poessinger
This extends the fix from 53e20097 ("vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabled") by ordering the execution in a way the Kernel does not complain.
2022-03-31vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabledChristian Poessinger
Commit f8b3d8999c ("ipv6: T4319: do not configure IPv6 related settings if it's disabled") moved the MTU configuration part under the code path which is only run if IPv6 is enabled on the system. This prevented MTU changes on IPv6 disabled systems.
2022-03-30vyos.ifconfig: T4319: add_addr() should not add IPv6 address if it's disabledChristian Poessinger
2022-03-30vyos.util: T4319: add is_ipv6_enabled() helper functionChristian Poessinger
2022-03-30vyos.ifconfig: make add_addr() method more reader firendlyChristian Poessinger
2022-03-30T4319: do not try to add ::1/128 to lo if IPv6 is disabledDaniil Baturin
2022-03-25ipv6: T4319: do not configure IPv6 related settings if it's disabledChristian Poessinger
2022-03-03interface: T4203: switch to new recursive node_changed() implementationChristian Poessinger
2022-02-21vxlan: T4120: code cleanup for multiple remotesChristian Poessinger
2022-02-20vxlan: T4120: add ability to set multiple remotes (PR #1127)Andreas
VXLAN does support using multiple remotes but VyOS does not. Add the ability to set multiple remotes and add their flood lists using "bridge" command.
2022-02-20interface: T4203: prevent DHCP client restart if not necessaryChristian Poessinger
In the past whenever a change happened to any interface and it was configured as a DHCP client, VyOS always had a breif outage as DHCP released the old lease and re-aquired a new one - bad! This commit changes the behavior that DHCP client is only restarted if any one of the possible options one can set for DHCP client under the "dhcp-options" node is altered.
2022-02-16wireless: T4240: bugfix interface bridgingChristian Poessinger
VLAN isolation can not be "set" when interface is of type wifi.
2022-01-05op-mode: T4142: Fix for show input ifbX interfacesViacheslav
Ability to see interface type "input" ifbX from op-mode
2021-12-31Merge branch 'firewall' of https://github.com/sarthurdev/vyos-1x into currentChristian Poessinger
* 'firewall' of https://github.com/sarthurdev/vyos-1x: zone_policy: T3873: Implement intra-zone-filtering policy: T2199: Migrate policy route op-mode to XML/Python policy: T2199: Migrate policy route to XML/Python zone-policy: T2199: Migrate zone-policy op-mode to XML/Python zone-policy: T2199: Migrate zone-policy to XML/Python firewall: T2199: Migrate firewall op-mode to XML/Python firewall: T2199: Migrate firewall to XML/Python
2021-12-21interface: T4056: Fix unexpected delete tc qdiscViacheslav
Traffic-policy rules are generated by old Perl code This commit prevents to unexpected override this code by python.
2021-12-19vxlan: T3700: add support for Generic Protocol extension (VXLAN-GPE)Christian Poessinger
2021-12-10vxlan: T3700: add support for external controlled FDBChristian Poessinger
Background information [1]. Specifies whether an external control plane (e.g. ip route encap/EVPN) or the internal FDB should be used. [1]: https://legacy.netdevconf.info/2.2/slides/prabhu-linuxbridge-tutorial.pdf
2021-12-06firewall: T2199: Migrate firewall to XML/Pythonsarthurdev
2021-12-06Merge pull request #1077 from sever-sever/T3829Christian Poessinger
netns: T3829: Ability to configure network namespaces
2021-12-03T4035: correct the interface basename extraction logicDaniil Baturin
to avoid confusing 'v' in GENEVE interface prefix ('gnv') with a "vXXX" part of a VRRP interface
2021-11-26netns: T3829: Ability to configure network namespacesViacheslav
2021-11-23netns: T3829: Add netns set section in interface.pyViacheslav
2021-11-19ethernet: T4011: deleting interface should place interface in admin down stateChristian Poessinger
Interface will still be visible to the operating system.
2021-11-19wwan: T3620: fix commend in remove()Christian Poessinger
Improve commend in WWANIf.remove() - remove() was implemented in commit d588a968 ("wwan: T3620: place interface in A/D state when removed").
2021-11-18wwan: T3620: place interface in A/D state when removedChristian Poessinger
(cherry picked from commit 61e4d75abb1129f63df5a47b9c9bf0553850d893)
2021-11-01interfaces: T2281: Ability to set static and DHCP addr on same interfaceViacheslav
There are not any reason to enable only DHCP or only static address on interface at the same time It is possible to have both.
2021-10-09tunnel: T3894: fix design when building synthetic MAC addressesChristian Poessinger
It seems not all systems have eth0 - get a list of all available Ethernet interfaces on the system (without VLAN subinterfaces) and then take the first one.
2021-10-02vyos.ifconfig: T3883: bugfix VRF deletionChristian Poessinger
We can not pass None as VRF name, this raises an exception. OSError: [Errno 255] failed to run command: ip link set dev eth2 master None (cherry picked from commit e687502b1cf4a3e15c562a3662afcbe0776b1fe7)
2021-09-26vyos.ifconfig: T3860: bugfix in get_mac_synthetic()Christian Poessinger
Commit 081e23996f (vyos.ifconfig: get_mac_synthetic() must generate a stable "MAC") calculated a "stable" synthetic MAC address per the interface based on UUID and the interface name. The problem is that this calculation is too stable when run on multiple instances of VyOS on different hosts/hypervisors. Having R1 and R2 setup a connection both via "tun10" interface will become the same "synthetic" MAC address manifesting in the same link-local IPv6 address. This e.g. breaks OSPFv3 badly as both neighbors communicate using the same link-local address. As workaround one can: set interfaces tunnel tun1337 address 'fe80::1:1337/64' set interfaces tunnel tun1337 ipv6 address no-default-link-local This commit changes the way in how the synthetic MAC address is generated. It's based on the first 48 bits of a sha256 sum build from a CPU ID retrieved via DMI, the MAC address of eth0 and the interface name as used before. This should add enough entropy to get a stable pseudo MAC address.
2021-09-25vyos.ifconfig: dhcpv6: re-use systemd_service definition variableChristian Poessinger
2021-09-25vyos.ifconfig: dhcp: T3300: always re-start dhcp client instead of startChristian Poessinger
Commit dd2eb5e5686655 ("dhcp: T3300: add DHCP default route distance") changed the logic on how the DHCP process is going to be started. The systemd unit was always "started" even if it was already running. It should rather be re-started to track changes in e.g. the DHCP hostname setting.
2021-09-21vrrp: keepalived: T3847: migrate to get_config_dict()Christian Poessinger
2021-09-21vrrp: keepalived: T616: move configuration to volatile /run directoryChristian Poessinger
Move keepalived configuration from /etc/keepalived to /run/keepalived.
2021-09-20ifconfig: T2104: cleanup IPv6 EUI-64 handling in update()Christian Poessinger
2021-09-20vyos.ifconfig: get_mac_synthetic() must generate a stable "MAC"Christian Poessinger
Commit b7d30137b1 ("vyos.ifconfig: provide generic get_mac_synthetic() method") provided a common helper to generate MAC addresses used by EUI64 addresses for interfaces not having a layer2 interface (WireGuard or ip tunnel). The problem is that every call to the helper always yielded a new MAC address. This becomes problematic when IPv6 link-local addresses are generated and modified on the interface as multiple link-local (fe80::/64) addresses can easily be added to the interface leaving ... a mess. This commit changes the way how the "synthetic" MAC is generated, we generate a UUID which is stable as it is based on the interface name. We take out the last 48 bits of the UUID and form the "MAC" address.
2021-09-20vyos.ifconfig: T2738: can only read from a file when it existsChristian Poessinger
When IPv6 is disbaled on an interface also the sysfs files related to IPv6 for this interface vanish. We need to check if the file exists before we read it.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 06:42:00 +0000