| Age | Commit message (Collapse) | Author |
|---|
|
(cherry picked from commit f29caa824c02c833a3978b9236391e4277c1a6ba)
|
|
`bridge vni show dev vxlanX` will exit with an error if no VNI filters
are installed, but the getter is used even when we haven't installed any.
This fix avoids fetching a list of VNI filters unless we know we've
created some.
(cherry picked from commit ac7ee2b36df23c3a4dd2be393132631556b6ef40)
|
|
Inspired-By: Brandon Zhi <Huiyuze_Zhi@protonmail.com>
(cherry picked from commit cf07a55d183be1f4d28b8b50a0784513d91d6fe2)
|
|
(cherry picked from commit 314901e7b45782fb6266b35b0e788ab7ea1404b8)
|
|
(cherry picked from commit d8ddd7191d3004e886fa45a2cf9bd8dd5e7f5e14)
|
|
(cherry picked from commit 234f35d8bae71b5d33ad97cdabc236ec6b13c3a2)
|
|
The netns support currently available on the VyOS CLI is only a
proof-of-technology, we have no real support for any service behind it.
In order to not confuse anyone on the LTS branch we decided to remove the
netns option for interfaces until there is a proper usecase and implementation
available.
|
|
Add abiilty to change `base_reachable_time_ms` option
/proc/sys/net/ipv6/neigh/{ifname}/base_reachable_time_ms
(cherry picked from commit 0bf4b570fe2d239b9fbabd3ae801ad3f04a06bde)
|
|
If we use rfc3768-compatibility with long interface names like
eth1.100.200 it converts the VRRP interface name name
to `<interface>v<VRID><IP version>`
For example `eth2.100.200v10v4`
The limit for interface name is 15 symbols and it causes that
interface name is ignoring by keepalived
VMAC interface name 'eth2.100.200v10v4' too long or invalid characters - ignoring
And it uses the default prefix `vrrp` for such cases.
It works fine, but such interfaces are not displayed in the op-mode
Allow prefix `vrrp` for the op-mode for `show interfaces`
(cherry picked from commit 29a20ce9f9792e23137be57358ca52ddee7ac54b)
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
(cherry picked from commit 274b2da242acd1f1f64ff1dee471e34295137c5f)
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
(cherry picked from commit 4c7c168fe970b807750a05ceb66b70c0d8652535)
|
|
(cherry picked from commit 09ac2851f89f2b7d94a21c3506e46f380e961fba)
|
|
After migrating from ISC DHCLIENT for IPv6 to wide-dhcp-client the logic which
was present to update /etc/resolv.conf with the DHCP specified nameservers and
also the search domain list was no longer present.
This commit adds a per interface rendered script to inform vyos-hostsd about
the received IPv6 nameservers and search domains.
(cherry picked from commit ece425f0191762638b7c967097accd8739e9103d)
|
|
vti: T6085: bring VTI interfaces up only when the IPsec tunnel is up (backport #3157)
|
|
This reverts commit ab30509b25d54dac99294b76ba03fd49c3d2c946.
As in T6152 there seem to be some NICs that have a non working implementation
of reading the EEE registers. Remove this feature in the meantime until there
is a less exploding solution hindering boards to boot.
Return to Kernel defaults by removing this code path.
(cherry picked from commit 946f93778f15f4af9f31cd5b164efcd931693635)
|
|
When a VTI interface is just created, it is in ADMIN UP state by default, even
if an IPSec peer is not connected. After the peer is disconnected the interface
goes to DOWN state as expected.
This breaks routing logic - for example, static routes through VTI interfaces
will be active even if a peer is not connected.
This changes to logic so ADMIN UP/DOWN state can only be changed by the
vti-up-down helper script.
Error was introduced during the Perl -> Python migration and move to the generic
vyos.ifconfig abstraction during the 1.4 development cycle.
(cherry picked from commit 9eb018c4935235d292d7c693ac15da5761be064a)
|
|
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType
value of 0x88A8 is required.
Reusing CLI command from VIF-S (QinQ) interfaces:
set interfaces bridge br0 protocol 802.1ad
(cherry picked from commit 9c9b1febff6863ccd3632a04d9e307909b3efe7a)
|
|
Typo (missaligned -/_) in the code causes hw-tc-offload to never be enabled in
the underlaying hardware via ethtool.
(cherry picked from commit bfb7e4f2b3743ae3c9a132daf4e2109e90d27f26)
|
|
(cherry picked from commit 7ba47f027f3a9441125c13a927eb23cee2de041b)
|
|
interface: T5550: Interface source-validation priority over global value (backport)
|
|
We will use _ as CLI level divider. The XML definition filename and also
the Python helper should match the CLI node.
Example:
set interfaces ethernet -> interfaces_ethernet.xml.in
set interfaces bond -> interfaces_bond.xml.in
set service dhcp-server -> service_dhcp-server-xml.in
(cherry picked from commit 4ef110fd2c501b718344c72d495ad7e16d2bd465)
|
|
VyOS is a routing (packet pushing) platform, thus supporting EEE which
potentially causes issues is not a good idea. Some recent Intel drivers enable
EEE by default, thus we will disable this for every NIC supporting EEE.
(cherry picked from commit ab30509b25d54dac99294b76ba03fd49c3d2c946)
|
|
The current implementation is wrong as it searches `master` in the
iproute2 JSON output. It is a worng as it could include bridges
or bonding interfaces
Add the more strict search `info_slave_kind == vrf`
(cherry picked from commit 2ebac5af10a36668ed3b8cfa6e5a9f61cf5d1068)
|
|
In a service provider network a service provider typically supports multiple
bridge domains with overlapping vlans. One bridge domain per customer. Vlans in
each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to
each customer.
Without the ability of VNI filtering, we can not provide VXLAN tunnels
with multiple tenants all requiring e.g. VLAN 10.
To Test:
set interfaces vxlan vxlan987 parameters external
set interfaces vxlan vxlan987 source-interface eth0
set interfaces vxlan vxlan987 parameters vni-filter
set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050
set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051
set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052
set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053
set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054
set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060
set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069
set interfaces bridge br0 member interface vxlan987
Add new op-mode command: show bridge vni
Interface VNI
----------- -----------
vxlan987 10050-10054
vxlan987 10060
vxlan987 10069
(cherry picked from commit 35f6033d21053fa420e837f157cd9377a4ccd26a)
|
|
T5770 Enable MACsec encryption stanza (backport #2518)
|
|
(cherry picked from commit a7a90e81ad03ec33acb32beeab71dbd5f27a2044)
|
|
|
|
Remove stray whitespace in sed script and call Section.interfaces with
vlan=False instead of a custom filter.
This extends commit f19c92f25 ("tunnel: T3894: fix design when building
synthetic MAC addresses")
(cherry picked from commit c8ba5dccfa9b02533c6536903ecacd3ddb04351e)
|
|
Add op-mode "show interfaces summary"
Add MAC, VRF and MTU options:
vyos@r4# run show interfaces summary
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address MAC VRF MTU S/L Description
----------- ----------------- ----------------- ------- ----- ----- -------------
dum0 203.0.113.1/32 96:44:ad:c5:a1:a5 default 1500 u/u
eth0 192.168.122.14/24 52:54:00:f1:fd:77 default 1500 u/u WAN
eth1 192.0.2.1/24 52:54:00:04:33:2b foo 1500 u/u LAN-eth1
eth2 - 52:54:00:40:2e:af default 1504 u/u LAN-eth2
eth3 - 52:54:00:09:a4:b4 default 1500 A/D
(cherry picked from commit dc3906f04fbfe8014531e092a77c1c8c2d10dfe0)
|
|
Changing the public key of a peer (updating the key material) left the old
WireGuard peer in place, as the key removal command used the new key.
WireGuard only supports peer removal based on the configured public-key, by
deleting the entire interface this is the shortcut instead of parsing out all
peers and removing them one by one.
Peer reconfiguration will always come with a short downtime while the WireGuard
interface is recreated.
(cherry picked from commit 2fc8738bc9c2fb6364a22d86079e8635cee91949)
|
|
In order to minimize the flooding of ARP and ND messages in the VXLAN network,
EVPN includes provisions [1] that allow participating VTEPs to suppress such
messages in case they know the MAC-IP binding and can reply on behalf of the
remote host. In Linux, the above is implemented in the bridge driver using a
per-port option called "neigh_suppress" that was added in kernel version 4.15.
[1] https://www.rfc-editor.org/rfc/rfc7432#section-10
(cherry picked from commit ec9a95502daa88b9632af12524e7cefebf86bab6)
|
|
As we have a bunch of options under "paramteres" already and "external" is
clearly one of them it should be migrated under that node as well.
(cherry picked from commit cc7ba8824a5e9ec818f0bbe7fb85e1713a591527)
|
|
If ethernet interface is a bond memeber:
1. Allow for changing only specific parameters which are specified
in EthernetIf.get_bond_member_allowed_options function.
2. Added inheritable parameters from bond interface to ethernet
interface which are scpecified
in BondIf.get_inherit_bond_options.
Users can change inheritable options under ethernet interface
but in commit it will be copied from bond interface.
3. All other parameters are denied for changing.
Added migration script. It deletes all denied parameters under
ethernet interface if it is a bond member.
(cherry picked from commit aa0282ceb379df1ab3cc93e4bd019134d37f0d89)
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
(cherry picked from commit 7f6624f5a6f8bd1749b54103ea5ec9f010adf778)
|
|
- Migrate IPv4 source-validation to nftables
- Interface source-validation value takes priority, fallback to global value
|
|
|
|
T5447: Initial support for MACsec static keys
|
|
|
|
|
|
|
|
|
|
|
|
|
|
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
|
|
Using threaded as CLI node is a very deep term used by kernel threads. To make
this more understandable to users, rename the node to per-client-thread.
It's also not necessary to test if any one peer is configured and probing if
the option is set. There is a base test which requires at least one peer
to be configured.
|
|
setting
|
|
This is only a cosmetic change so that the default value is properly retrieved
from the defaultValue XML node.
|
|
|
|
Added 'set interfaces wireguard wgX threaded' command.
Process traffic from each peer in a dedicated thread.
|
|
|
