Age | Commit message (Collapse) | Author |
|
This change is required and currently only impacts WireGuards peer configuration,
so that the peers name is not mangled.
(cherry picked from commit 4d2201eed00ac4780d0196abf53dd9b7cb943a09)
|
|
This commit also extends the smoketest to verify that the exception for this
error is raised.
(cherry picked from commit 84a429b41175b95634ec9492e0cf3a564a47abdd)
|
|
implementations
(cherry picked from commit 9d0c37fbbc91acc9f2c0f2abaab360479e451f0f)
|
|
Commit 29082959 ("ethernet: T3163: only change ring-buffer settings if
required") added a delta-check code for the ring buffer values, unfortunately
this was never properly evaluated as str() and int() got compared resulting
always in an unequal result.
(cherry picked from commit 6c280b1ca52c8f2a80bbaea52aa3e09060af04b3)
|
|
It makes no sense to have a parser for the ethtool values in ethtool.py
and ethernet.py - one instance ios more then enough!
(cherry picked from commit 0229645c8248decb5664056df8aa5cd5dff41802)
|
|
Only update the RX/TX ring-buffer settings if they are different from the ones
currently programmed to the hardware. There is no need to write the same value
to the hardware again - this could cause traffic disruption on some NICs.
(cherry picked from commit 29082959e0efc02462fba8560d6726096e8743e9)
|
|
It makes no sense to have a parser for the ethtool value sin ethtool.py
and ethernet.py - one instance ios more then enough!
(cherry picked from commit 6f5fb5c503b5df96d0686002355da3633b1fc597)
|
|
Not all interface drivers have the ability to change the speed and duplex
settings. Known drivers with this limitation are vmxnet3, virtio_net and
xen_netfront. If this driver is detected, an error will be presented to the
user.
(cherry picked from commit cc742d48579e4f76e5d3230d87e22f71f76f9301)
|
|
This makes understanding the code easier what is "really" called without
opening the man page.
(cherry picked from commit a086dc2c429aea9614ac7a9c735c6475c2d6da59)
|
|
Some tc qdisc rules are generated by old perl code
It prevent to unexpected override this code by python.
|
|
Deprecated in the Linux Kernel by commit 08a00fea6de277df12ccfadc21 ("net:
Remove references to NETIF_F_UFO from ethtool.").
|
|
option
Commit 31169fa8 ("vyos.ifconfig: T3619: only set offloading options if
supported by NIC") added a warning for the user if an offload option was about
to change that was not possible at all (harware limit).
Unfortunately the warning was even displayed if nothing was done at all. This
got corrected.
(cherry picked from commit ce784a9fcb7199f87949f17777b7b736227c85b3)
|
|
(cherry picked from commit 50364a4b7a9de85fe59a6a4fb611bafb64c9f7f0)
|
|
Add a new method which supports checking if the desired speed and duplex
setting is actually supported by the underlaying network interface card.
>>> from vyos.ethtool import Ethtool
>>> tmp = Ethtool('eth0')
>>> tmp.check_speed_duplex('100', 'full')
False
>>> tmp.check_speed_duplex('1000', 'full')
True
(cherry picked from commit 147f655a69cd9526cd23f51ab18027cb5abc95b2)
|
|
(cherry picked from commit 324aa9598c7d90efc917a00447380f985553b657)
|
|
Commit d22f97af ("vyos.ethtool: T3163: rename unused methods for offload
validation") reworked the entire class on how data should be presented to the
user, but forgot to drop the is_fixed_lro() method.
(cherry picked from commit eac8915413cedce089234fdbef57ad25da208eec)
|
|
(cherry picked from commit 80ee5233aa8245ded09d04f2618a580d5dcc6b46)
|
|
Check eui64_old value before deleting
It can be empty or not ipv6 address.
|
|
In the past we always told ethtool to change the offloading settings, even if
this was not supported by the underlaying driver.
This commit will only change the offloading options if they differ from the
current state of the NIC and only if it's supported by the NIC. If the NIC does
not support setting the offloading options, a message will be displayed
for the user:
vyos@vyos# set interfaces ethernet eth2 offload gro
vyos@vyos# commit
[ interfaces ethernet eth2 ]
Adapter does not support changing large-receive-offload settings!
(cherry picked from commit 31169fa8a763e36f6276632139da46b1aca3a7af)
|
|
(cherry picked from commit d22f97af23abb5c12f8ea79c50fdda7ee0a3832d)
|
|
Partial backport of commit 421fa38445a, this is required to backport the
complete IS-IS functionality from current.
|
|
(cherry picked from commit d9d923ea4e0bbe0cc154dc2fbdd626585b5d7449)
|
|
When the interface name was stripped down from "eth0.201" to "eth" to determine
the appropriate interface section, VRRP interfaces got left out on the call
to rstrip().
VRRP interfaces now show up in "show interfaces" as they did in VyOS 1.2.
vyos@vyos:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
dum0 172.18.254.201/32 u/u
eth0 - u/u
eth0.10 172.16.33.8/24 u/u
eth0.201 172.18.201.10/24 u/u
eth1 10.1.1.2/24 u/u
eth1v10 10.1.1.1/24 u/u
eth2 - u/u
lo 127.0.0.1/8 u/u
::1/128
(cherry picked from commit df22bc2c96d5095eaec978a58bf5d2361d758a86)
|
|
|
|
(cherry picked from commit ddff5eba85feea2a8d6d24e1914ce6d51ce2ea74)
|
|
vyos@vyos# show interfaces pppoe
pppoe pppoe10 {
+ access-concentrator asdfg
authentication {
password bar
user foo
}
default-route force
no-peer-dns
source-interface eth0.202
}
vyos@vyos# python3
Python 3.9.2 (default, Feb 28 2021, 17:03:44)
[GCC 10.2.1 20210110] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from vyos.config import Config
>>> from vyos.configdict import get_interface_dict
>>> from vyos.configdict import leaf_node_changed
>>> conf = Config()
>>> base = ['interfaces', 'pppoe']
>>> tmp = get_interface_dict(conf, base, 'pppoe10')
>>> leaf_node_changed(conf, ['access-concentrator'])
>>> ['']
(cherry picked from commit f476e456e20393e7e7e91b73e369c9b033fbf048)
|
|
WireGuard, Tunnel and also PPPoE all need a ways to calculate a synthetic MAC
address used for the EUI64 link-local addresses. Instead of copying the code
from Tunnel to WireGuard to PPPoE, use a generic implementation.
(cherry picked from commit b7d30137b17da49ed5099d4d96659b363fc7bcc9)
|
|
(cherry picked from commit 9c97bd1b0214e102ac36eae8b2c3c9ff672a0bf3)
|
|
(cherry picked from commit e1debb1b57a445fa2357f7dbb5b3f04383f8b1e3)
|
|
(cherry picked from commit 6bd780887c0e13dc9272ec499ebc6f01cfaf7ea6)
|
|
(cherry picked from commit 1a498915efdc433dda7bd6e5fcc08703a48560c6)
|
|
This reverts commit 29e438755c8bd2b9598a2016a3c42891f0cbfa1d.
|
|
commit_in_progress()
(cherry picked from commit a74e67a778a6c698e44cbc6c5d184d03c9c12396)
|
|
(cherry picked from commit e5c61fc80119556bb1b61a80868d4a3470e07319)
|
|
(cherry picked from commit 591b8bcadd8b6bbd46c61484193d2bf7e16bd1ae
commit 31553283aaa929da63147082e85513e8d4dacf0e
commit 59a4aadfe419eca16e6288b37d6c51acd9789903)
|
|
VyOS will automatically append the subsystem name (pppoe-server or sstp) when
something goes wrong. No need to hardcode this into the error string a second
time.
(cherry picked from commit 29463355e6ec98195ffd52e018bc775cd4199456)
|
|
|
|
(backport from 1.4)
|
|
|
|
In some cases, we need to wait until local address is assigned.
And only then l2tpv3 tunnel can be configured.
For example when ipv6 address is in "tentative" state
or we wait for some routing daemon/route for a remote address.
|
|
This reverts commit e4d697b1d3aad0cb8e81f4c36bcaa4c089195f43.
We need those classes for the operational level "show interfaces" command.
|
|
It is easier to backport the entire vyos.ifconfig library from 1.4 instead of
backporting single pieces which are required to add new feature to the tunnel
interface section.
In addition that both libraries are now back in sync it will become much easier
to backport any other new feature introduced in VyOS 1.4!
|
|
PPPoE uses an entire different approach to setup the interface and VTI is still
implemented using the old node.def definitions from vyatta-cfg-system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keep the vyos.util function clean and not pull in the rest of the world
when importing it.
|