summaryrefslogtreecommitdiff
path: root/python/vyos
AgeCommit message (Collapse)Author
2019-10-23[HTTP API] Add endpoints for config file and image management.Daniil Baturin
2019-10-22T1759: Migrating interfaceskroy
2019-10-18Python/ifconfig: T1712: always start DHCP when configuredChristian Poessinger
DHCP was only started when the interface operstate was set to up but this is wrong. An interface can be configured as DHCP interface and DHCP client must be launched even when the physical interface becomes available n-minutes later. DHCP client then can ask for an IP assignemnt by DHCP. Tested by starting DHCP client on a not connected ethernet interface. Address was assigned later on after link became ready.
2019-10-18Python/ifconfig: T1557: get_status() must use admin state not operstateChristian Poessinger
2019-10-16Revert "Python/ifconfig: T1712: wait when changing interface state"Christian Poessinger
This reverts commit 1257d7851866d42287018b38dd871f279b87286a. It will delay network interface configuration everywhere when e.g. no network cable is plugged in. We should find the root cause why DHCPd sometimes did not start.
2019-10-13Python/ifconfig: T1557: add support for DHCPv6 client optionsChristian Poessinger
2019-10-13Python/ifconfig: T1557: bugfix when configuring accept_ra on VLAN interfacesChristian Poessinger
2019-10-11Python/ifconfig: T1723: add flag to specify if we should wait for interface upChristian Poessinger
2019-10-09T1430: add dhcp vendor-class-id client optionChristian Poessinger
2019-10-09Python/ifconfig: T1557: add generic support for DHCP client optionsChristian Poessinger
2019-10-06Python/ifconfig: T1712: wait when changing interface stateChristian Poessinger
With some interfaces, for example bond vif, it take some time for the state change to really happen. Because of this later code, like starting DHCP client, might not work as expected as get_state() reports the old (real) state. Now when changing state of an interface we are (busy-)waiting up to 12.5 seconds before we inform the user that the interface could not be brought up. This should be more then enough time for any interface to start except when there is really no cable attached.
2019-10-06Python/ifconfig: T1557: add return in front of self._cmd() callsChristian Poessinger
2019-10-01T1424: Check for http error or redirect, when loading remote files.John Estabrook
(ported from vyatta-cfg f051e369)
2019-09-24Python/ifconfig: T1557: add STPIf class (spanning tree) bridge memberChristian Poessinger
2019-09-24Python/ifconfig: T1557: bugfix removing Q-in-Q VLAN interfacesChristian Poessinger
VLAN interfaces have not been removed "in order". What does it mean? We need to delete Q-in-Q interfaces prior to deleting the underlaying VLAN interface (vif-s). This was not the case and that triggered an exception that a non existing interface was about to be removed. Tested using adding and deleting the following config: set interfaces ethernet eth2 address 192.0.2.1/24 set interfaces ethernet eth2 description "VyOS bonding" set interfaces ethernet eth2 disable-link-detect set interfaces ethernet eth2 mac 00:91:00:00:00:01 set interfaces ethernet eth2 mtu 9000 set interfaces ethernet eth2 vif-s 100 address 192.168.10.1/24 set interfaces ethernet eth2 vif-s 100 description "802.1ad service VLAN 100" set interfaces ethernet eth2 vif-s 100 mtu 1500 set interfaces ethernet eth2 vif-s 100 mac 00:91:00:00:00:02 set interfaces ethernet eth2 vif-s 100 vif-c 110 address "192.168.110.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 110 description "client VLAN 110" set interfaces ethernet eth2 vif-s 100 vif-c 120 address "192.168.120.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 120 description "client VLAN 120" set interfaces ethernet eth2 vif-s 100 vif-c 130 address "192.168.130.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 130 description "client VLAN 130" set interfaces ethernet eth2 vif 400 address 192.168.40.1/24 set interfaces ethernet eth2 vif 400 description "802.1q VLAN 400" set interfaces ethernet eth2 vif 400 mtu 1500 set interfaces ethernet eth2 vif 400 mac 00:91:00:00:00:03
2019-09-24Python/ifconfig: T1557: refactor BondIf 'mode' property to set_mode()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor BondIf 'arp_interval' property to ↵Christian Poessinger
set_arp_interval()
2019-09-24Python/ifconfig: T1557: refactor BondIf 'arp_ip_target' property to ↵Christian Poessinger
set_arp_ip_target()/get_arp_ip_target()
2019-09-24Python/ifconfig: T1557: refactor BondIf 'arp_interval' property to ↵Christian Poessinger
set_arp_interval()
2019-09-24Python/ifconfig: T1557: refactor BondIf 'xmit_hash_policy' property to ↵Christian Poessinger
set_hash_policy()
2019-09-24Python/ifconfig: T1557: remove unused has_autoneg() from EthernetIfChristian Poessinger
2019-09-24Python/ifconfig: T1557: refactor Interface 'state' property to ↵Christian Poessinger
set_state()/get_state()
2019-09-24Python/ifconfig: T1557: refactor Interface 'arp_cache_tmo' property to ↵Christian Poessinger
set_set_arp_cache_tmo()
2019-09-24Python/ifconfig: T1557: refactor Interface 'proxy_arp_pvlan' property to ↵Christian Poessinger
set_proxy_arp_pvlan()
2019-09-24Python/ifconfig: T1557: refactor Interface 'proxy_arp' property to ↵Christian Poessinger
set_proxy_arp()
2019-09-24Python/ifconfig: T1557: loopback: implement derived remove()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor Interface 'ifalias' property to set_alias()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor Interface 'link_detect' property to ↵Christian Poessinger
set_link_detect()
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'stp_state' property to set_stp()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'priority' property to set_priority()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'ageing_time' property to ↵Christian Poessinger
set_ageing_time()
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'hello_time' property to ↵Christian Poessinger
set_hello_time()
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'forward_delay' property to ↵Christian Poessinger
set_forward_delay()
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'max_age' property to set_max_age()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor BridgeIf 'multicast_querier' property to ↵Christian Poessinger
set_multicast_querier()
2019-09-24Python/ifconfig: T1557: refactor BondIf 'primary' property to set_primary()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor 'mac' property to set_mac()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor 'mtu' property to get_mtu()/set_mtu()Christian Poessinger
2019-09-23Python/ifconfig: T1680: fix dhclient shutdownChristian Poessinger
Tell DHCP server we release the IP address and also remove it from the interface by properly calling dhclient shutdown. Syslog: Sep 23 21:20:34 vyos dhclient: Killed old client process Sep 23 21:20:35 vyos dhclient: DHCPRELEASE on eth2 to 172.16.35.254 port 67
2019-09-23fixes T1679 (parsing MAC address as base-10)Marek Isalski
2019-09-20Python/ifconfig: T1557: ethernet: add offloading interfacesChristian Poessinger
2019-09-20Python/ifconfig: T1557: update commentsChristian Poessinger
2019-09-20Python/ifconfig: T1557: delete all assigned IP addresses on remove()Christian Poessinger
2019-09-20ethernet: T1637: call remove() on interface deletionChristian Poessinger
2019-09-20Python/ifconfig: T1557: use proper inheritance levels on remove()Christian Poessinger
2019-09-20Python/ifconfig: T1557: unify '/sys/class/net/{}' pathChristian Poessinger
2019-09-20Python/ifconfig: T1557: vmxnet3/virtio_net do not support changing ↵Christian Poessinger
speed/duplex control
2019-09-20Python/ifconfig: T1557: vmxnet3/virtio_net do not support changing flow controlChristian Poessinger
2019-09-20Python/ifconfig: T1557: query driver if it supports auto negotiationChristian Poessinger
2019-09-20Python/ifconfig: T1557: call ethtool with full pathChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 16:43:00 +0000