summaryrefslogtreecommitdiff
path: root/python/vyos
AgeCommit message (Collapse)Author
2020-01-14vrrp: T1884: Keep transition-script native behaviour and implement ↵DmitriyEshenko
transaction-script 'stop'
2020-01-14T1950: Add support for reading component versions from JSON fileJohn Estabrook
2020-01-03ifconfig: T1939: provide abstraction for interface "ip" optionChristian Poessinger
Provide an XML/Python abstraction to * ip disable-arp-filter * ip enable-arp-accept * ip enable-arp-announce * ip enable-arp-ignore The old implementation can co-exist until the last interfaces have been migrated.
2020-01-02ifconfig: T1557: refactor apply_vlan_config() functionChristian Poessinger
instead of providing three copies of the same method in bonding, ethernet and wireless, make a common function in vyos.ifconfig_vlan.apply_vlan_config().
2019-12-31l2tpv3: T1923: support interface deletionChristian Poessinger
2019-12-31l2tpv3: T1923: implementation in XML/PythonChristian Poessinger
Tested using: R1: --- set interfaces l2tpv3 l2tpeth10 address '2001:db8:beef::1/64' set interfaces l2tpv3 l2tpeth10 address '100.0.0.1/24' set interfaces l2tpv3 l2tpeth10 destination-port '3000' set interfaces l2tpv3 l2tpeth10 encapsulation 'udp' set interfaces l2tpv3 l2tpeth10 local-ip '172.18.201.10' set interfaces l2tpv3 l2tpeth10 peer-session-id '10' set interfaces l2tpv3 l2tpeth10 peer-tunnel-id '100' set interfaces l2tpv3 l2tpeth10 remote-ip '172.18.204.10' set interfaces l2tpv3 l2tpeth10 session-id '20' set interfaces l2tpv3 l2tpeth10 source-port '6000' set interfaces l2tpv3 l2tpeth10 tunnel-id '200' R2: --- set interfaces l2tpv3 l2tpeth10 address '2001:db8:beef::2/64' set interfaces l2tpv3 l2tpeth10 address '100.0.0.2/24' set interfaces l2tpv3 l2tpeth10 destination-port '6000' set interfaces l2tpv3 l2tpeth10 encapsulation 'udp' set interfaces l2tpv3 l2tpeth10 local-ip '172.18.204.10' set interfaces l2tpv3 l2tpeth10 peer-session-id '20' set interfaces l2tpv3 l2tpeth10 peer-tunnel-id '200' set interfaces l2tpv3 l2tpeth10 remote-ip '172.18.201.10' set interfaces l2tpv3 l2tpeth10 session-id '10' set interfaces l2tpv3 l2tpeth10 source-port '3000' set interfaces l2tpv3 l2tpeth10 tunnel-id '100'
2019-12-31ifconfig: vxlan: change VXLANIf APIChristian Poessinger
2019-12-31ifconfig: geneve: always place interface in A/D stateChristian Poessinger
2019-12-31geneve: use proper variable nameChristian Poessinger
2019-12-23lldp: T1898: support multiple management addressesChristian Poessinger
- management-address is not a <multi/> node - added new vyos.validate.is_loopback_addr() function - returns true is address passed is a looback address
2019-12-16Merge branch 'current' into equuleushagbard
2019-12-12ethernet: T1637: do not delete VIFs on every commitChristian Poessinger
A delta-check problem caused the deletion of each and every VLAN interface when anything under an interface has been changed. This also cause PPPoE session interruptions.
2019-12-11vyos.config: T1846: ignore edit level when obtaining running configJohn Estabrook
In addition to ignoring edit level for the session config (12a21a4b), the running config should be parsed from the top level.
2019-12-10vyos.config: T1862: restore regex after mergeJohn Estabrook
2019-12-10Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: T1855, T1826: Restore support for reboot/poweroff in M minutes. vyos.config: T1764: allow for list argument to exists, in value case vyos.config: T1846: ignore edit level when obtaining working config T1843: use include files for interface proxy-arp-pvlan option T1843: use include files for interface proxy-arp configuration T1843: use include files for interface arp-cache-timeout configuration T1843: use include files for interface link-detect feature T1843: use include files for interface MTU size T1843: use include files for interface MAC address T1843: use include files to disable interface (admin down) T1843: use include files for interface description T1843: use include files for DHCP/DHCPv6 options T1843: recursively include IP address definitions in VIF/VIF-S definitions T1843: add support for recursive includes T1843: use include files for VIF/VIF-S interfaces T1843: use include files for IPv4/IPv6 interface address configuration T1843: run interface-definitions though GCC preprocessor
2019-12-09vyos.config: T1764: allow for list argument to exists, in value caseJohn Estabrook
2019-12-09vyos.config: T1846: ignore edit level when obtaining working configJohn Estabrook
2019-12-06equuleus: T1862: Use regex pattern \s+ to split strings on whitespaceJohn Estabrook
2019-12-06Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: openvpn: bridge: T1556: remove obsolete bridge-group definition ifconfig: T1849: fix DHCPv6 startup Python/VyOS validate: T1849: handle is_ipv6()/is_ipv6() exceptions ifconfig: T1793: remove dhcpv6 client debug output ddclient: T1853: bugfix TypeError exception syslog: T1845: syslog host no longer accepts a port syslog: code formatting syslog: T1845: syslog host no longer accepts a port syslog: renaming files and conf script to fit new scheme T1855, T1826: clean up the reboot/shutdown script. wireguard: T1853: disable peer doesn't work Revert "syslog: T1845: syslog host no longer accepts a port" dmvpn: T1784: Add swanctl load call syslog: T1845: syslog host no longer accepts a port [vyos.config] T1847: correctly set_level for path given as empty string
2019-12-06ifconfig: T1849: fix DHCPv6 startupChristian Poessinger
2019-12-06Python/VyOS validate: T1849: handle is_ipv6()/is_ipv6() exceptionsChristian Poessinger
2019-12-06ifconfig: T1793: remove dhcpv6 client debug outputChristian Poessinger
2019-12-04[vyos.config] T1847: correctly set_level for path given as empty stringJohn Estabrook
2019-12-04Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: shutdown: T1826: Modify cancel reboot msg T1801: move escaping of backslashes into configtree vxlan: T1636: remove unused import statements geneve: T1799: remove unused import statements
2019-12-03T1801: move escaping of backslashes into configtreeJohn Estabrook
2019-11-28Merge branch 'current' into equuleushagbard
2019-11-25T1824: restore original umaskJohn Estabrook
2019-11-25T1824: set write permissions for cfg_group on vyos-migrate.logJohn Estabrook
2019-11-24Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: bridge: T1673: re-use "base" variable bridge: T1673: add missing VLAN bridge member migration geneve: T1799: add misssing "vni" to default_config_data vxlan: T1636: add misssing "vni" to default_config_data geneve: T1799: set minimum MTU size 1500 bytes geneve: T1799: add IPv4 routing parameters geneve: T1799: support bridging geneve: T1799: add Generic Network Virtualization Encapsulation
2019-11-24geneve: T1799: add Generic Network Virtualization EncapsulationChristian Poessinger
2019-11-23Merge branch 'current' into equuleusChristian Poessinger
* current: wireless: T1627: support station mode wireless: T1627: support DHCP(v6) addresses wireless: T1627: add support for RADIUS source-address wireless: T1627: RADIUS servers must have a key specified wireless: T1627: change RADIUS CLI syntax l2tp: harmonize RADIUS wording wireless: T1627: re-order WPA key in hostapd config wireless: T1627: change priority from 318 to 400 wireless: T1627: fix generated ht_capab and vht_capab wireless: T1627: fix regex for 'ht channel-set-width' wireless: T1627: config migrator does not support camel casing wireless: T1627: initial rewrite of show-wireless.pl in Python wireless: T1627: add op-mode commands wireless: T1627: initial rewrite in XML/Python style pppoe-server: T1821: Set radius module priority T1818: Print name of migration script on failure T1814: Add log of migration scripts run during config migration vyos-hostsd: T1812: run increment first [vyos-hostsd] T1812: Reload pdns on dhcp client update migration-scripts: l2tp: T1811: add missing check on server existence
2019-11-21T1818: Print name of migration script on failureJohn Estabrook
2019-11-21T1814: Add log of migration scripts run during config migrationJohn Estabrook
2019-11-17Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: dns: T1786: add proper processing of 'system disable-dhcp-nameservers' openvpn: fix typo in op-mode command on display rx bytes T1801: escape isolated backslashes before passing to ConfigTree() wireless: T1627: fix interface names for list_interfaces.py [service https] T1443: add setting of HTTPS listen port
2019-11-17T1801: escape isolated backslashes before passing to ConfigTree()John Estabrook
2019-11-11Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: ifconfig: T1793: extend set_speed_duplex() delta check [OpenVPN]: T1704: Added uppercase entries of ncp-ciphers, since there seems to be a bug in OpenVPN client when comparing pushed cipher with local ncp cipher list [OpenVPN]: T1704: Moved ncp-ciphers out of encryption block in config template [OpenVPN]: T1704: Changed the description of ncp-ciphers in config [OpenVPN]: T1704: Added function for ncp-ciphers, and ability to disable it. [OpenVPN]: T1704: Changed config structure for OpenVPN encryption to support ncp-ciphers. [OpenVPN]: T1704: Added migration scripts for interface 2-to-3 Intel QAT: T1788: Intel QAT implementation ifconfig: T1793: add delta check on set_speed_duplex() ifconfig: T1793: add delta check on set_flow_control() Python/ifconfig: wireguard: remove trailing whitespaces l2tp: T1747: automatically calculate gw-ip-address QAT: T1788: Intel QAT implementation
2019-11-11ifconfig: T1793: extend set_speed_duplex() delta checkChristian Poessinger
Commit 9e4947770064 ("ifconfig: T1793: add delta check on set_speed_duplex()") was wave1 of reducing the amount of switch-port flaps and BGP session resets. The delta check now also handles the case of fixed speed and duplex settings.
2019-11-10ifconfig: T1793: add delta check on set_speed_duplex()Christian Poessinger
The speend and duplex settings should only be changed when they need to. Always configuring this setting will make the kernel disable and re-enable the physical interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. This is the first part of this fix for speed/duplex auto settings. In addition - this also reduces the config commit time.
2019-11-10ifconfig: T1793: add delta check on set_flow_control()Christian Poessinger
The flow control settings should only be changed when they need to. If flow control is altered, the kernel will disable and re-enable the interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. In addition - this also reduces the config commit time.
2019-11-10Python/ifconfig: wireguard: remove trailing whitespacesChristian Poessinger
2019-11-08Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: ddclient: T1789: fix RFC2136 generated config T1774: fix error output Python/ifconfig: T1557: do not allow both IPv4 and dhcp address on interfaces list_interfaces: add wifi interfaces to bridgeable interfaces
2019-11-04Python/ifconfig: T1557: do not allow both IPv4 and dhcp address on interfacesChristian Poessinger
2019-11-04list_interfaces: add wifi interfaces to bridgeable interfacesChristian Poessinger
2019-10-31Merge branch 'current' of github.com:vyos/vyos-1x into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyos-1x: [conf completion]: T1779: Add tunnels to completion [XML templates] T1772: Changed old hacks to proper regex, according to the fix Add a function for retrieving config dicts. snmp: make script extension code more readable snmp: use proper stat literals on chmod() snmp: fix verify() indent on script extensions snmp: fix verify() bail out early order snmp: T1738: cleanup import statements T1759: Fixing dependency bug from previous commit T1773, T1774: add a show config operation with JSON and raw options. T1759: Merging interface.py into ifconfig.py Allow list arguments in the vyos.config show_config() function. Replace the try and wait for segfault approach with explicit inSession check. T1773: add a script for converting the config to JSON. It also exposes those functions in vyos.configtree [XML templates] T1772: Add escaping of `\` symbol in `<regex>`
2019-10-28Add a function for retrieving config dicts.Daniil Baturin
2019-10-27Merge pull request #155 from kroy-the-rabbit/py-interfaceChristian Poessinger
T1759: Merging interface.py into ifconfig.py
2019-10-27T1759: Fixing dependency bug from previous commitkroy
2019-10-27T1759: Merging interface.py into ifconfig.pykroy
2019-10-27Allow list arguments in the vyos.config show_config() function.Daniil Baturin
2019-10-27Replace the try and wait for segfault approach with explicit inSession check.Daniil Baturin
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 14:03:28 +0000