| Age | Commit message (Collapse) | Author |
|---|
|
The vyos.xml functionality is replaced with vyos.xml_ref.
|
|
T6197: Fixed usage ipoe interface client-subnet without pools
|
|
T6068: dhcp-server: add command <set service dhcp-server high-availability mode>
|
|
Allowed using ipoe interface client-subnet without client pools
configuration.
|
|
mode> so user can define what type of ha use: active-active or active-passive
|
|
found using "git ls-files *.py | xargs pylint | grep W0611"
|
|
* Use interface_exists() outside of verify()
* Use verify_interface_exists() in verify() to drop common error message
|
|
configverify: T6198: add common helper for PKI certificate validation
|
|
The next evolutional step after adding get_config_dict(..., with_pki=True) is
to add a common verification function for the recurring task of validating SSL
certificate existance in e.g. EAPoL, OpenConnect, SSTP or HTTPS.
|
|
T6192: allow binding SSH to multiple VRF instances
|
|
|
|
|
|
Currently VyOS only supports binding a service to one individual VRF. It might
become handy to have the services (initially it will be VRF, NTP and SNMP) be
bound to multiple VRFs.
Changed VRF from leafNode to multi leafNode with defaultValue: default - which
is the name of the default VRF.
|
|
|
|
dhcpv6-client: T2590: fix vyos-hostsd update for nameserver and search domains
|
|
After migrating from ISC DHCLIENT for IPv6 to wide-dhcp-client the logic which
was present to update /etc/resolv.conf with the DHCP specified nameservers and
also the search domain list was no longer present.
This commit adds a per interface rendered script to inform vyos-hostsd about
the received IPv6 nameservers and search domains.
|
|
T6185: simplify marshalling of section and config data for config-sync
|
|
dhcp-server: T4718: Listen-address is not commit if the ip address is on the interface with vrf
|
|
|
|
Package path/section data in single command containing a tree (dict) of
section paths and the accompanying config data. This drops the call to
get_config_dict and the need for a list of commands in request.
|
|
|
|
vyos.system.grub: T3664: add chroot argument to the GRUB install function
|
|
to allow unmodified code to be executed from anywhere,
even outside of VyOS installations
|
|
to faciliate running it outside of a VyOS installation
|
|
|
|
op-mode: T6175: "renew dhcp interface <name>" does not check for DHCP interface
|
|
interface with vrf
|
|
The current op-mode script simply calls sudo systemctl restart "dhclient@$4.service"
with no additional information about a client interface at all.
This results in useless dhclient processes
root 47812 4.7 0.0 5848 3584 ? Ss 00:30 0:00 /sbin/dhclient -4 -d
root 48121 0.0 0.0 4188 3072 ? S 00:30 0:00 \_ /bin/sh /sbin/dhclient-script
root 48148 50.0 0.2 18776 11264 ? R 00:30 0:00 \_ python3 -
Which also assign client leases to all local interfaces, if we receive one
valid DHCPOFFER
vyos@vyos:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address MAC VRF MTU S/L Description
----------- ----------------- ----------------- ------- ----- ----- -------------
eth0 - 00:50:56:bf:c5:6d default 1500 u/u
eth0.10 172.16.33.102/24 00:50:56:bf:c5:6d default 1500 u/u
eth1 172.16.33.131/24 00:50:56:b3:38:c5 default 1500 u/u
172.16.33.102/24 and 172.16.33.131/24 are stray DHCP addresses.
This commit moved the renew command to the DHCP op-mode script to properly
validate if the interface we request a renew for, has actually a dhcp address
configured. In additional this exposes the renew feature to the API.
|
|
Add system image in compatibility mode would set the default boot
without reference to console_type; fix the translation of default to
the correct index in compat grub.cfg.
|
|
dhcp-server high-availability>.
|
|
Revert "ethernet: T5566: disable energy efficient ethernet (EEE) for interfaces"
|
|
This reverts commit ab30509b25d54dac99294b76ba03fd49c3d2c946.
As in T6152 there seem to be some NICs that have a non working implementation
of reading the EEE registers. Remove this feature in the meantime until there
is a less exploding solution hindering boards to boot.
Return to Kernel defaults by removing this code path.
|
|
bgp: T6106: Valid commit error for route-reflector-client option defi…
|
|
Extend the way how we determine if interfaces exist in VyOS. In the past we
only validated if the interface in question really exists at the OS level.
This has some drawbacks as services (like OSPF or OSPFv3) can also handle
interfaces dynamically which appear or leaf the OS.
This commit not only checks for OS interfaces but also if the interface in
question was configured at the CLI level, this is proof enough to pass the
check. If it does not exist at the CLI level, we continue searching it it's
maybe a Kernel interface - useful for container networks.
In addition we can now not only raise() an error but simply show a warning if
an interface does not exist.
|
|
|
|
vti: T6085: interface is always down and only enabled by IPSec daemon
|
|
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType
value of 0x88A8 is required.
Reusing CLI command from VIF-S (QinQ) interfaces:
set interfaces bridge br0 protocol 802.1ad
|
|
When a VTI interface is just created, it is in ADMIN UP state by default, even
if an IPSec peer is not connected. After the peer is disconnected the interface
goes to DOWN state as expected.
This breaks routing logic - for example, static routes through VTI interfaces
will be active even if a peer is not connected.
This changes to logic so ADMIN UP/DOWN state can only be changed by the
vti-up-down helper script.
Error was introduced during the Perl -> Python migration and move to the generic
vyos.ifconfig abstraction during the 1.4 development cycle.
|
|
peer-group
handle vtysh bgp error
|
|
qos: T1871: add MTU option when configure limiter traffic-policy
|
|
T5996: selectively escape and restore single backslashes in config
|
|
add mtu to default and specified class
update smoke test
|
|
|
|
To iterate files on ext* file systems GRUB reads their inodes one by one,
ignoring names. This breaks our configuration logic that relies on proper
loading order.
This commit adds a helper `sort_inodes()` that needs to be used whenever GRUB
configuration files are created. It recreates files, changing their inodes in a
way where inodes order matches alphabetical order.
|
|
dhcp: T6102: Fix clear DHCP lease op-mode
|
|
|
|
config: T4919: Add support for encrypted config with TPM
|
|
|
|
* Add `clear dhcpv6-server lease`
* Standardize using vyos.opmode
|
|
|
