| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
The current wversion unfortunately will raise a KeyError:
>>> data = {}
>>> vyos_dict_search('foo', data)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3/dist-packages/vyos/util.py", line 685, in vyos_dict_search
return dict[path]
KeyError: 'foo'
|
|
almost every interface can be part of a bridge thus the code for changing STP
cost is best part of the Interface() base class itself.
Commit b5ef10cf ("ifconfig: T2985: support on demand bridge creation")
implemented this change but the STP file was not removed on the test devices
causing tests to pass.
|
|
The current implementation for bridge based interfaces has an issue which is
caused by priority inheritance. We always assumed that the bridge interface will
be created last, but this may not be true in all cases, where some interfaces
will be created "on demand" - e.g. OpenVPN or late (VXLAN, GENEVE).
As we already have a bunch of verify steps in place we should not see a bridge
interface leak to the underlaying infrastructure code. This means, whenever an
interface will be member of a bridge, and the bridge does yet not exist, we will
create it in advance in the interface context, as the bridge code will be run
in the same commit but maybe sooner or later.
This will also be the solution for T2924.
|
|
|
|
We must use XML node style (hyphen over underscore).
|
|
Commit 5db3d631 ("ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled
on the interface") checked the "mtu" key for it's value and the test only passed
if mtu was larger then the required 1280 bytes when IPv6 address have
been configured on the link.
wireless (WiFi) interfaces have no MTU node - thus this always resulted in a
Python KeyError.
|
|
|
|
Sometimes (PPPoE server is one of them) a simple defaultValue in the XML is not
enough - several values should be set. In order to support a list of
defaultValues you can now simply list them as a whitespace separated string.
Example:
<defaultValue>pap chap mschap mschap-v2</defaultValue>
will generate a Python list ['pap', 'chap', 'mschap', 'mschap-v2'] when
retrieved by vyos.xml.defaults()
|
|
Every interface knows if it is part of a bridge or not - except a VLAN (VIF)
interface. Also VLANs should be aware of its master bridge.
Add a testcase to ensure when VIFs on an interface change the bridge does not
loos one of it's members.
|
|
We must use exists() as get_config_dict() will always return {} - even when an
empty interface node like
+macsec macsec1 {
+}
exists.
|
|
Using an MTU less then the required 1280 bytes (as per RFC) on an interface
where IPv6 is not explicitly disabled by:
- set interfaces ethernet eth1 ipv6 address no-default-link-local
- not having any other IPv6 address configured
Will now trigger a commit error via verify() instead of raising
FileNotFoundError!
|
|
Currently the MTU size of an interface is only checked when entered via CLI but
if the interface supportes the configured MTU at all is not verified at all.
New helper functions get_min_mtu(), get_max_mtu() and verify_mtu() have been
added to provide a central API for validation.
|
|
|
|
>>> from vyos.ifconfig import Interface
>>> tmp=Interface('eth0')
>>> tmp.get_min_mtu()
60
>>> tmp.get_max_mtu()
9000
|
|
When configuring DHCPv6-PD it is mandatory to also specify at least one
interface where the newly delegated prefix will be used. Without this setting
DHCPv6-PD makes no sense at all.
|
|
|
|
As we already check that a bond/bridge member interface is not a member of any
other bridge or bond, the check must be extended. We also need to ensure that
the bond member interface is not used as a source-interface to pppoe, macsec,
tunnel, pseudo-ethernet, vxlan interfaces.
|
|
|
|
When removing e.g. a macsec interface and also its associated member interface
from the bridge, it will happen that the macsec interface instance is long gone
before we reach the code in the bridge interface which will remove it from the
bridge itself.
When this is the case, we can not call BridgeIf.del_port() as it will throw an
exception that the interface does not exist. We now only remove a bridge member
if the interface in question is still available in the kernel.
|
|
A lot of derived classes from Interface implemented their own get_config()
method which more or less was the same everywhere. We also hat different
qualifiers like @staticmethod or @classmethod.
This is now changed to only have the @classmethod in Interface base class which
will return the necessary dictionary keys for the required interfaces. This
change is a mid reduction in lines of code which is always a very nice thing!
|
|
In the past we had to provide the ethertype value used for the VLAN
protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q).
This should be changed to a more user friendly CLI node (protocol over
ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in
presenting RAW information from the ethernet header to the user. Also iproute2
calls it protocol which makes way more sense over the "raw" value.
|
|
|
|
hostapd/wpa_supplicant will control the admin state of an interface, thus we
should re-add it to a bridge after we have launched those services.
|
|
|
|
Instead of using an Adapter pattern to make interfaces VLAN-aware, create a
derived class named VLANIf to represent a VLAN. This change was necessary to
eliminate mixed code in Interfaces class which was VLAN - free, but recently
gained some VLAN specific code for set_admin_state().
In addition this "autoresolves" the issue in T2894 as a bond vlan interface
will no longer change the lower interface.
|
|
|
|
Removing a member from a bond/LACP will turn the physical interface always in
admin-down state. This is invalid, the interface should be placed into the state
configured on the VyOS CLI.
Smoketest on bond interfaces is extended to check this behavior.
|
|
|
|
Specifies the minimum number of links that must be active before asserting
carrier. It is similar to the Cisco EtherChannel min-links feature. This allows
setting the minimum number of member ports that must be up (link-up state)
before marking the bond device as up (carrier on). This is useful for situations
where higher level services such as clustering want to ensure a minimum number
of low bandwidth links are active before switchover.
This option only affects 802.3ad mode.
The default value is 0. This will cause carrier to be asserted (for 802.3ad
mode) whenever there is an active aggregator, regardless of the number of
available links in that aggregator. Note that, because an aggregator cannot be
active without at least one available link, setting this option to 0 or to 1
has the exact same effect.
|
|
|
|
With VyOS 1.2 the default WireGuard behavior is used. This means that when a
WireGuard interface is added to the system, there is no "MAC" address - also
there is no IPv6 link-local address assigned by the Kernel to this particular
interface.
With implementation of T2653 all interfaces now receive an IPv6 address - which
is also valid for WireGuard interfaces - unfortunately this logic relies on the
interface MAC address - and as there is none, the link-local address will be
always the same. The logic behind is coded here [1].
We generate an IPv6 link-local address even when there is no "MAC" address. The
behavior/functionality (as with VyOS 1.2) must be restored to not have a
link-local IPv6 address at all. Any user can add any IPv6 link-local address
manually by issuing: set interfaces wireguard wg01 address fe80::ff:1/64.
Change vyos.ifconfig.add_ipv6_eui64_address to only add the EUI64-based
link-local address if a MAC address is available.
[1] https://github.com/vyos/vyos-1x/blob/3077158391ceee4ce04c27dec33f629529727c36/python/vyos/ifconfig/interface.py#L468
|
|
|
|
Now that b40c52682a256 ("config: T2636: get_config_dict() returns a list on
multi node by default") is implemented the workarounds can be removed.
|
|
ConfigSession needs to have required env vars manully injected; add the
shim definition env var to the list, if config daemon is active.
|
|
Unless no_multi_convert is True, a single valued multi node will be
returned as a list by get_config_dict(). Modification of Thomas Mangin's
version.
|
|
because of a bug in frr.py the default before_re will not be working.
it is by default without a group, but will be used in a match that needs a group.
The whole string could be matched in the group, so the fix is easy to implement.
|
|
|
|
|
|
This is faster implementation then using jmespath.search('foo.bar', dict).
|
|
|
|
|
|
This reverts commit 5a5974d5a00b482cabd3dee92bc365d3c9f399bc.
Required for operational mode "show interfaces" command.
|
|
Currently DHCPv6-PD requires an interface address configured to dhcpv6 on the
CLI. This is not required also sometimes there is either no dhcpv6 interface
addressing available (PPPoE) or wanted. This limitation was artificial due to
the old interface code.
Change the implementation to spawn the DHCPv6 client and request a prefix even
when there is no address request configured.
|
|
|
|
The current CLI did not support multiple prefix-delegations per interface. Some
ISPs only send one /64 to a client per prefix-delegation request, but they
allow the customer to request multiple prefixes.
The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a
tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0).
In the past the user needed to know what prefix will be assigned and required
to calculate the sla-len by himself. The 'sla-len' node was dropped and is now
calculated in the background from the 'dhcpv6-options pd 0 length' node.
It is no longer mandatory to supply the 'sla-id' node, if sla-id is not
specified it is 'guessed' by counting upwards.
Example configuration:
----------------------
ethernet eth1 {
address dhcpv6
dhcpv6-options {
pd 0 {
length 56
interface eth2 {
address 1
}
}
}
}
This will request a /56 assignment from the ISP and will delegate a /64 network
to interface eth2. VyOS will use the interface address ::1 on the delegate
interface (eth2) as its local address.
|
|
|
|
|
