summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2022-08-29ethernet: T4653: bugfix copy-paste when processing NIC offloadingChristian Poessinger
Commit 31169fa8a763e ("vyos.ifconfig: T3619: only set offloading options if supported by NIC") added the new implementation which handles NIC offloading. Unfortunately every single implementation was copied from "gro" which resulted in a change to gro for each offloading option - thus options like lro, sg, tso had no effect at all. It all comes down to copy/paste errors ... one way or another. (cherry picked from commit b01f27b3bb3f4cbc6096011856d83009d0440313)
2022-08-22Merge pull request #1484 from c-po/bridge-fixesChristian Poessinger
bridge: T4632: vlan aware bridge lacks CPU forwarding
2022-08-22bridge: T4632: vlan aware bridge lacks CPU forwardingChristian Poessinger
The VLAN aware bridge was forwarding traffic between member ports, but traffic destined torwards the CPU was dropped. This resulted in a gateway not reachable or DHCP leases that could not be handed out. Tested via: VyOS set interfaces bridge br0 enable-vlan set interfaces bridge br0 member interface eth1 allowed-vlan '10' set interfaces bridge br0 member interface eth1 allowed-vlan '20' set interfaces bridge br0 member interface eth1 allowed-vlan '30' set interfaces bridge br0 member interface eth1 allowed-vlan '40' set interfaces bridge br0 member interface eth1 native-vlan '40' set interfaces bridge br0 member interface eth2 allowed-vlan '30' set interfaces bridge br0 member interface eth2 allowed-vlan '20' set interfaces bridge br0 member interface eth2 allowed-vlan '10' set interfaces bridge br0 member interface eth2 allowed-vlan '40' set interfaces bridge br0 vif 10 address '10.0.10.1/24' set interfaces bridge br0 vif 20 address '10.0.20.1/24' set interfaces bridge br0 vif 30 address '10.0.30.1/24' set interfaces bridge br0 vif 40 address '10.0.40.1/24' Arista vEOS vlan 10,20,30,40 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 interface Vlan10 ip address 10.0.10.2/24 interface Vlan20 ip address 10.0.20.2/24 interface Vlan30 ip address 10.0.30.2/24 interface Vlan40 ip address 10.0.40.2/24 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk spanning-tree portfast Cisco vIOS interface GigabitEthernet0/0 ip address 10.0.40.3 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 10.0.10.3 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 10.0.20.3 255.255.255.0 ! interface GigabitEthernet0/0.30 encapsulation dot1Q 30 ip address 10.0.30.3 255.255.255.0 ! (cherry picked from commit f60d0e1ce029925b843f635b36154c90049b9577)
2022-08-19vyos.config.configdict: T4592: T4629: only print interface name, not ↵Christian Poessinger
interface dict on error (cherry picked from commit 475fbb785dca76868715827833dc44115635c4a6)
2022-08-04Merge pull request #1453 from sever-sever/T4572-eqDaniil Baturin
mtu: T4572: Add DHCP-option MTU to get values from DHCP-server
2022-08-01mtu: T4572: Add DHCP-option MTU to get values from DHCP-serverViacheslav Hletenko
Ability to get MTU from DHCP-server and don't touch it per any interface change if interface 'dhcp-options mtu' is configured (cherry picked from commit 29b0ee30bf2622a40ca3d17e3f6b9e94e5b62072)
2022-08-01bridge: T4565: bugfix error message when member interface contains an addressChristian Poessinger
We should not print the entire dictionary - we only need the bridge interface name: Bug: Cannot assign address to interface "eth1" as it is a member of bridge "{'br0': {'allowed_vlan': ['5-50', '101'], 'native_vlan': '101'}}"! Fixed: Cannot assign address to interface "eth1" as it is a member of bridge "br0"! (cherry picked from commit 71f2f2d789bd3452ca7b5306f39df5f6537bfef0)
2022-07-31bridge: T4565: is_member() must return the dict of the member interfaceChristian Poessinger
... otherwise functionality like bridge VLANs will loose configuration on membe rinterface update (e.g. description) (cherry picked from commit a295ec1fc4cb9cdbb0bd5efd7c8e72060ce036f5)
2022-07-31bridge: T4579: cleanup interface dict (remove empty keys)Christian Poessinger
(cherry picked from commit 54227591a0eb3c7aa8c896c6ec8b1826ce070ddf)
2022-07-31bridge: T4579: remove duplicate code path already handled by base classChristian Poessinger
Interface() base class already takes care about VLAN creation/removal of newly added or no longer required interfaces. No need to code this logic again. (cherry picked from commit 41477cc85208507be55f8db4e412ad78eae764eb)
2022-07-31Revert "vyos.configdict(): T4228: is_member() must split VLAN interfaces"Christian Poessinger
(cherry picked from commit 99ff0ac7d29a65466a0fe4a12ef1a42cce90ece0)
2022-07-18Merge pull request #1406 from c-po/equuleus-interface-fixesDaniil Baturin
equuleus: Bond and Bridge interface fixes + new smoketests
2022-07-18interfaces: T4525: interfaces can not be member of a bridge/bond and a VRFChristian Poessinger
(cherry picked from commit 81e0f4a8dece85da7169ba05448e870206aaf57b)
2022-07-18bond: T4525: fix adding member interface to bond after removing VRFChristian Poessinger
When removing a VRF from an ethernet interface and adding the interface to a bond in the same commit led to an OSError: [Errno 16] Device or resource busy! (cherry picked from commit 3592f56a8deb6c44dcdd7a44ef54fc2c39eb1a3b)
2022-07-18vyos.configdict(): T4228: is_member() must return member interface config dictChristian Poessinger
This extends commit 39157912 ("vyos.configdict(): T4228: is_member() must use the "real" hardware interface") and returns the config dict of the used member interfaces. (cherry picked from commit 5b4f76429989a6ab8ca64aeed5a1fae09fe7c6ca)
2022-07-18bond: bridge: T4534: error out if member interface is assigned to a VRF instanceChristian Poessinger
It makes no sense to enslave an interface to a bond or a bridge device if it is bound to a given VRF. If VRFs should be used - the encapuslating/master interface should be part of the VRF. Error out if the member interface is part of a VRF. (cherry picked from commit 87d2dff241d9ab4de9f3a2c7fbf9852934557aef)
2022-07-18vyos.configdict(): T4228: is_member() must split VLAN interfacesChristian Poessinger
Commit 39157912 ("vyos.configdict(): T4228: is_member() must use the "real" hardware interface") added a bugfix on calling is_member() to retrieve the real physical information about an interface. It did not include a code path to also split up VLAN interfaces. This has been fixed. (cherry picked from commit fdeae251431cb747e8f60d96269b4365b7401807)
2022-07-18bond: T4522: add ability to specify mii monitor interval via CLIChristian Poessinger
Linux Kernel supports to specify the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures. A value of zero disables MII link monitoring. A value of 100 is a good starting point. The default value is 100. set interfaces bonding bond0 mii-mon-interval <n> (cherry picked from commit 4315c8fa5bb090e2b7edd6bda205041623e2511d)
2022-07-18vyos.configdict(): T4228: is_member() must use the "real" hardware interfaceChristian Poessinger
When is_member() is inspecting the bridge/Bond member interfaces it must work with the real interface (e.g. eth1) under the "ethernet" node and not work on the "member interface eth1" CLI tree, that makes no sense at all. (cherry picked from commit 3915791216998a18bf6831450df68ee199e2e4f8)
2022-07-14netflow: T4532: Fix flow-accounting server IPv6 bugViacheslav Hletenko
Fix for IPv6 netflow_plugin name When we use IPv6 uacctd.conf doesnt expect coluns in the plugin name. Replace coluns to dash. Place IPv6 address into [] brackets
2022-07-11bond: T1557: re-add miimon configuration - lost in translationChristian Poessinger
(cherry picked from commit cabfd006bed9cd2d1512cb313616a8e97fe29b9e)
2022-07-11bond: T4521: ARP monitor interval is not configured despite set via CLIChristian Poessinger
The code path for changing the interval is never executed. (cherry picked from commit daddb0ad7812843f64a7ae0bf4b5e15db7b1758e)
2022-05-26http-api: T4442: Add action resetViacheslav Hletenko
Add action 'reset' (op-mode) for HTTP-API http://localhost/reset curl --unix-socket /run/api.sock -X POST -Fkey=mykey \ -Fdata='{"op": "reset", "path": ["ip", "bgp", "192.0.2.14"]}' \ http://localhost/reset
2022-05-06T4361: refactor and simplify vyos.config.exists()Christian Poessinger
(cherry-picked from commit 63fee7ab0c082f3c614bb140de1e7482399dff2b)
2022-04-29vyos.configdict: T4369: add is_node_changed() helperChristian Poessinger
(cherry picked from commit 714346e2ee0c61a08a9d17fdb962f2fbea9f73c9)
2022-04-20configdiff: T4260: add support for diff_tree classJohn Estabrook
Add support for the configtree diff algorithm. A new function ConfigDiff().is_node_changed(path) -> bool is added to recursively detect changes in the tree below the node at path; existing functions take the keyword argument 'recursive: bool' to apply the algorithm in place of the existing, non-recursive, comparison. (cherry picked from commit e5d04b20be0ef270d20f1d5ac9203b3a03649135)
2022-04-20configtree: T4235: distinguish sub(-tract) tree from delete treeJohn Estabrook
The DiffTree class maintains both the 'sub'(-tract) configtree, containing all paths in the LHS of the comparison that are not in the RHS, and the 'delete' configtree: the delete tree is the minimal subtree containing only the first node of a path not present in the RHS. It is the delete tree that is needed to produce 'delete' commands for config mode, whereas the 'sub' tree contains full information, needed for recursively detecting changes to a node. (cherry picked from commit 193cbd15ba39a41614c63b997e6a62254589158a)
2022-04-20configtree: T4235: allow empty argumentsJohn Estabrook
(cherry picked from commit 4625fd41f99ddf77c104a657cd90a1ddf5449dd8)
2022-04-20configtree: T4235: simplification of diff_tree classJohn Estabrook
The return value of diff_tree is now a single config_tree, with initial children of names: ["add", "delete", "inter"] containing the config sub-trees of added paths; deleted paths; and intersection, respectively. The simplifies dumping to json, and checking existence of paths, hence, of node changes. (cherry picked from commit 3d28528ff84b4e874faf80028709bd08b2956933)
2022-04-20configtree: T4235: add utility get_subtreeJohn Estabrook
(cherry picked from commit ff7e2cd622cf3679cd9265b2cb766395a1830f50)
2022-04-20configtree: T4235: encapsulate config tree diff functionJohn Estabrook
(cherry picked from commit 2ee94418ce24429dbf6a52c2a327ed08a1935958)
2022-04-08Merge pull request #1263 from c-po/wwan-t4324-equuleusDaniil Baturin
T4324, T4338, T4339 WWAN interface bugfixes
2022-04-08Merge pull request #1273 from c-po/t4331-equuleusDaniil Baturin
T4331: IPv6 link local addresses are not configured when an interface is in a VRF (equuleus)
2022-04-07vyos.base: T4346: add common DeprecationWarning() classChristian Poessinger
(cherry picked from commit 957f73ed8c2c22afd5e56adc36b4d032b3f1a5f1)
2022-04-06interfaces: T4331: Fix assign link-local static IPv6 addr to vrfViacheslav Hletenko
If we have link-local static address and vrf, for example: set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64' set interfaces ethernet eth2 vrf 'foo' This IPv6 address was assigned before vrf, as result after attaching the intreface to vrf we lose this static linklocal address DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2' DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo' DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2' This commit fixes this, the address is assigned after vrf assign (cherry picked from commit d6e22b28887c7a3f7d2f8b955c2e90bcadaeeeba)
2022-04-03wwan: T4324: is_wwan_connected() must verify if ModemManager is runningChristian Poessinger
(cherry picked from commit 15c94a8706622927850eba8c22fcff2df32978b4)
2022-03-31vyos.ifconfig: T4330: MTU must be configured prior to any IPv6 option changeChristian Poessinger
This extends the fix from 53e20097 ("vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabled") by ordering the execution in a way the Kernel does not complain. (cherry picked from commit 601ab19fd8c81a998b3c966cc83b85ed60ac5ae0)
2022-03-31vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabledChristian Poessinger
Commit f8b3d8999c ("ipv6: T4319: do not configure IPv6 related settings if it's disabled") moved the MTU configuration part under the code path which is only run if IPv6 is enabled on the system. This prevented MTU changes on IPv6 disabled systems. (cherry picked from commit 53e20097d227ebf4bdb4dc6c85427ec9c5ec3982)
2022-03-30vyos.ifconfig: T4319: add_addr() should not add IPv6 address if it's disabledChristian Poessinger
(cherry picked from commit 60f009defadb9d36bf84def1e839cb11a0b3d619)
2022-03-30vyos.util: T4319: add is_ipv6_enabled() helper functionChristian Poessinger
(cherry picked from commit df0fbfeedce0f163e9d10be21d58ad4dc797a28a)
2022-03-30T4319: do not try to add ::1/128 to lo when IPv6 is disabledDaniil Baturin
2022-03-27graphql: T3993: add unsettable gql option; this is not exposed by CLIJohn Estabrook
(cherry picked from commit 9d3acc2b55f2d1c563f1941e59c98c159211dc58)
2022-03-25vyos.util: T4319: rename sysctl() -> sysctl_write()Christian Poessinger
(cherry picked from commit 364009e4317fb5c6732635726b511613aa2ed519)
2022-03-25ipv6: T4319: do not configure IPv6 related settings if it's disabledChristian Poessinger
(cherry picked from commit f8b3d8999cbea988ce8e7d303957558308ddc1bc)
2022-03-25vyos.util: T4319: provide generic sysctl_read() helperChristian Poessinger
(cherry picked from commit 52cb6185a4a51ffa92f10e0ded55a943bc21bc60)
2022-03-11Ethtool: T4297: Update drivers supporting speed/flow/duplexDaniel Berlin
The iavf, ice, and i40e drivers do not support speed, flow, or duplex control using ethtool. As a result, interface configuration changes fail to commit when using those drivers. This patch fixes that by correctly marking those drivers as not supporting those controls. (cherry picked from commit 2894b52454311f8e011bed910704064be7471275)
2022-02-22vyos.configdict: T4263: leaf_node_changed() must also honor valueLess CLI nodesChristian Poessinger
If a valueLess node is added or removed from the CLI, a call to leaf_node_changed() will not detect it. If node is valueLess, on change old or new (depending on addition or deletion) will be {} and is treated as None. Add handler for this special case where old or new is an instance of a dictionary but empty. (cherry picked from commit 149f704a172fb14f16d0ba00ef237b972539492f)
2022-02-21smoketest: vxlan: T4120: verify support for multiple remote addressesChristian Poessinger
(cherry picked from commit c3661c8d5d7e8f5c1d040cadf134e87f0d77e28e)
2022-02-21vxlan: T4120: code cleanup for multiple remotesChristian Poessinger
(cherry picked from commit 3a605ad020d8d20b08a72cb1284f6e590d1fd7b5)
2022-02-21vxlan: T4120: add ability to set multiple remotes (PR #1127)Andreas
VXLAN does support using multiple remotes but VyOS does not. Add the ability to set multiple remotes and add their flood lists using "bridge" command. (cherry picked from commit 0ecddff7cffa8900d351d5c15e32420f9d780c0b)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 23:51:25 +0000