summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2022-04-16vyos.base: use Warning() helper where applicableChristian Poessinger
2022-04-16salt-minion: T4364: issue warning - do not use sha1 hashing algorithmChristian Poessinger
2022-04-16dhcp(v6)-client: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-14config: T4361: correct exists()/exists_effective() on value(s)John Estabrook
The check for existence of value(s) in config.exists relied solely on return_value, causing the return of a false negative on multi-valued nodes; this is corrected. Also, config.exists_effective did no check for existence of values; this is added.
2022-04-11vyos.ethtool: T4327: add Hyper-V NIC driver to speed/duplex ignore listChristian Poessinger
2022-04-11T4327: ignore PermissionError caused by ethtool spee/duplex/autoneg settingDaniil Baturin
Certain NICs seem to fail to report that they don't support speed/duplex setting, so they look as if it's supported, but the command fails in practice. It's probably better to preserve a working config in that case.
2022-04-07ipv6: T4346: delete (migrate) CLI command to disable IPv6 address familyChristian Poessinger
2022-04-07vyos.base: T4346: add common DeprecationWarning() classChristian Poessinger
2022-04-07qos: T4284: verify mirror/redirect target interface existsChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on vlan subinterfacesChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on all interface typesChristian Poessinger
2022-04-06firewall: T4345: Fix incorrect rule limit rate syntaxsarthurdev
2022-04-05interfaces: T4331: Fix assign link-local static IPv6 addr to vrfViacheslav Hletenko
If we have link-local static address and vrf, for example: set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64' set interfaces ethernet eth2 vrf 'foo' This IPv6 address was assigned before vrf, as result after attaching the intreface to vrf we lose this static linklocal address DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2' DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo' DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2' This commit fixes this, the address is assigned after vrf assign
2022-04-01wwan: T4324: is_wwan_connected() must verify if ModemManager is runningChristian Poessinger
2022-04-01vyos.template: T4333: add Jinja2 plugin to test if a variable is defined and ↵Christian Poessinger
not none We have a lot of boiler plate template code like {% if config.interface is defined and config.interface.remote_as is defined and config.interface.remote_as is not none %} ... {% endif %} This can be stripped down using a custom test to: {% if config.interface.remote_as is vyos_defined %} ... {% endif %} In addition the new vyos_defined test supports comparison {% if foo.bar.baz is vyos_defined('zoo') %} ... {% endif %} So the above will only evaluate to true if the variable foo.bar.baz is defined and its content is zoo This is inspired from https://github.com/aristanetworks/ansible-avd/ which make heavy use of it. All new templates should be written in this new style.
2022-03-31vyos.ifconfig: T4330: MTU must be configured prior to any IPv6 option changeChristian Poessinger
This extends the fix from 53e20097 ("vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabled") by ordering the execution in a way the Kernel does not complain.
2022-03-31vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabledChristian Poessinger
Commit f8b3d8999c ("ipv6: T4319: do not configure IPv6 related settings if it's disabled") moved the MTU configuration part under the code path which is only run if IPv6 is enabled on the system. This prevented MTU changes on IPv6 disabled systems.
2022-03-30vyos.ifconfig: T4319: add_addr() should not add IPv6 address if it's disabledChristian Poessinger
2022-03-30vyos.util: T4319: add is_ipv6_enabled() helper functionChristian Poessinger
2022-03-30vyos.ifconfig: make add_addr() method more reader firendlyChristian Poessinger
2022-03-30T4319: do not try to add ::1/128 to lo if IPv6 is disabledDaniil Baturin
2022-03-27graphql: T3993: add unsettable gql option; this is not exposed by CLIJohn Estabrook
2022-03-26vyos.validate: T4321: make is_addr_assigned() VRF awareChristian Poessinger
Commit 1bfe09f9 ("vyos.validate: T4321: make is_intf_addr_assigned() VRF aware") added VRF support for an interface bound function. As an interface can only be bound to one VRF check makes less sense. This commit moves the VRF awareness from is_intf_addr_assigned() to is_addr_assigned() so we check the VRF assignment even prior of calling is_intf_addr_assigned() and fail fast.
2022-03-26vyos.validate: T4321: make is_intf_addr_assigned() VRF awareChristian Poessinger
2022-03-25vyos.util: T4319: rename sysctl() -> sysctl_write()Christian Poessinger
2022-03-25ipv6: T4319: do not configure IPv6 related settings if it's disabledChristian Poessinger
2022-03-25vyos.util: T4319: provide generic sysctl_read() helperChristian Poessinger
2022-03-21qos: T4284: initial XML interface definitions for rewriteChristian Poessinger
2022-03-11[Ethtool] T4297: Update drivers supporting speed/flow/duplexDaniel Berlin
The iavf, ice, and i40e drivers do not support speed, flow, or duplex control using ethtool. As a result, interface configuration changes fail to commit when using those drivers. This patch fixes that by correctly marking those drivers as not supporting those controls.
2022-03-10Revert "component_version: T4291: consolidate read/write functions"John Estabrook
This reverts commit 534f677d36285863decb2cdff179687b4fd690cb. Revert while investigating failure in vyos-configtest.
2022-03-10Revert "save-config: T4292: rewrite vyatta-save-config.pl to Python"John Estabrook
This reverts commit c4d389488970c8510200cac96a67182e9333b891. Revert while investigating failure in vyos-configtest.
2022-03-08save-config: T4292: rewrite vyatta-save-config.pl to PythonJohn Estabrook
2022-03-08component_version: T4291: consolidate read/write functionsJohn Estabrook
2022-03-04interface: T4203: bugfix Q-in-Q interface parsingChristian Poessinger
Commit 0e23fc10 ("interface: T4203: switch to new recursive node_changed() implementation") switched to a new implementation to retrieve nested changes under a CLI node. Unfortunately the new API was not called - instead the old one was used.
2022-03-03interface: T4203: switch to new recursive node_changed() implementationChristian Poessinger
2022-03-02configdiff: T4260: add support for diff_tree classJohn Estabrook
Add support for the configtree diff algorithm. A new function ConfigDiff().is_node_changed(path) -> bool is added to recursively detect changes in the tree below the node at path; existing functions take the keyword argument 'recursive: bool' to apply the algorithm in place of the existing, non-recursive, comparison.
2022-02-28configtree: T4235: distinguish sub(-tract) tree from delete treeJohn Estabrook
The DiffTree class maintains both the 'sub'(-tract) configtree, containing all paths in the LHS of the comparison that are not in the RHS, and the 'delete' configtree: the delete tree is the minimal subtree containing only the first node of a path not present in the RHS. It is the delete tree that is needed to produce 'delete' commands for config mode, whereas the 'sub' tree contains full information, needed for recursively detecting changes to a node.
2022-02-28configtree: T4235: allow empty argumentsJohn Estabrook
2022-02-28configtree: T4235: simplification of diff_tree classJohn Estabrook
The return value of diff_tree is now a single config_tree, with initial children of names: ["add", "delete", "inter"] containing the config sub-trees of added paths; deleted paths; and intersection, respectively. The simplifies dumping to json, and checking existence of paths, hence, of node changes.
2022-02-28configtree: T4235: add utility get_subtreeJohn Estabrook
2022-02-22vyos.configdict: T4263: leaf_node_changed() must also honor valueLess CLI nodesChristian Poessinger
If a valueLess node is added or removed from the CLI, a call to leaf_node_changed() will not detect it. If node is valueLess, on change old or new (depending on addition or deletion) will be {} and is treated as None. Add handler for this special case where old or new is an instance of a dictionary but empty.
2022-02-21smoketest: vxlan: T4120: verify support for multiple remote addressesChristian Poessinger
2022-02-21vxlan: T4120: code cleanup for multiple remotesChristian Poessinger
2022-02-20vxlan: T4120: add ability to set multiple remotes (PR #1127)Andreas
VXLAN does support using multiple remotes but VyOS does not. Add the ability to set multiple remotes and add their flood lists using "bridge" command.
2022-02-20static: T4203: obey interface dhcp default route distanceChristian Poessinger
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes") added a bug whenever a static route is modified - the DHCP interface will always end up with metric 210 - if there was a default route over a DHCP interface.
2022-02-20interface: T4203: prevent DHCP client restart if not necessaryChristian Poessinger
In the past whenever a change happened to any interface and it was configured as a DHCP client, VyOS always had a breif outage as DHCP released the old lease and re-aquired a new one - bad! This commit changes the behavior that DHCP client is only restarted if any one of the possible options one can set for DHCP client under the "dhcp-options" node is altered.
2022-02-17pki: eapol: T4245: Add full CA and client cert chains to wpa_supplicant PEM ↵Andrew Gunnerson
files This commit updates the eapol code so that it writes the full certificate chains for both the specified CA and the client certificate to `<iface>_ca.pem` and `<iface>_cert.pem`, respectively. The full CA chain is necessary for validating the incoming server certificate when it is signed by an intermediate CA and the intermediate CA cert is not included in the EAP-TLS ServerHello. In this scenario, wpa_supplicant needs to have both the intermediate CA and the root CA in its `ca_file`. Similarly, the full client certificate chain is needed when the ISP expects/requires that the client (wpa_supplicant) sends the client cert + the intermediate CA (or even + the root CA) as part of the EAP-TLS ClientHello. Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
2022-02-17vyos.configverify: T4255: fix unexpected print of dictionary instead of keyChristian Poessinger
2022-02-16xml: T3474: get component version dictionary from xml cache, not legacyJohn Estabrook
2022-02-16xml: T3474: add smoketest to check xml component versions are maintainedJohn Estabrook
Add smoketest to catch updates to a component version in legacy curver_DATA that is not present in xml syntaxVersion.