| Age | Commit message (Collapse) | Author |
|---|
|
Move the two implementations to get the driver name of a NIC from ethernet.py
and ethtool.py to only ethtool.py.
(cherry picked from commit 07840977834816b69fa3b366817d90f44b5dc7a7)
|
|
(cherry picked from commit 1572edd2cef355710d1129907d3e49451a6c31d4)
|
|
This change is required and currently only impacts WireGuards peer configuration,
so that the peers name is not mangled.
|
|
|
|
|
|
This commit also extends the smoketest to verify that the exception for this
error is raised.
|
|
data = {
'interfaces': {'dummy': {'dum0': {'address': ['192.0.2.17/29']}},
'ethernet': {'eth0': {'address': ['2001:db8::1/64', '192.0.2.1/29'],
'description': 'Test123',
'duplex': 'auto',
'hw_id': '00:00:00:00:00:01',
'speed': 'auto'},
'eth1': {'address': ['192.0.2.9/29'],
'description': 'Test456',
'duplex': 'auto',
'hw_id': '00:00:00:00:00:02',
'speed': 'auto'}}}
}
dict_search_recursive(data, 'hw_id') will yield both '00:00:00:00:00:01' and
'00:00:00:00:00:02' as generator object.
|
|
implementations
|
|
Commit 29082959 ("ethernet: T3163: only change ring-buffer settings if
required") added a delta-check code for the ring buffer values, unfortunately
this was never properly evaluated as str() and int() got compared resulting
always in an unequal result.
|
|
It makes no sense to have a parser for the ethtool values in ethtool.py
and ethernet.py - one instance ios more then enough!
|
|
Only update the RX/TX ring-buffer settings if they are different from the ones
currently programmed to the hardware. There is no need to write the same value
to the hardware again - this could cause traffic disruption on some NICs.
|
|
It makes no sense to have a parser for the ethtool value sin ethtool.py
and ethernet.py - one instance ios more then enough!
|
|
Not all interface drivers have the ability to change the speed and duplex
settings. Known drivers with this limitation are vmxnet3, virtio_net and
xen_netfront. If this driver is detected, an error will be presented to the
user.
|
|
This makes understanding the code easier what is "really" called without
opening the man page.
|
|
Deprecated in the Linux Kernel by commit 08a00fea6de277df12ccfadc21 ("net:
Remove references to NETIF_F_UFO from ethtool.").
(cherry picked from commit f5e46ee6cc2b6c1c1869e26beca4ccd5bf52b62f)
|
|
option
Commit 31169fa8 ("vyos.ifconfig: T3619: only set offloading options if
supported by NIC") added a warning for the user if an offload option was about
to change that was not possible at all (harware limit).
Unfortunately the warning was even displayed if nothing was done at all. This
got corrected.
|
|
|
|
|
|
interface: T3782: Fix unexpected delete qdisc rule
|
|
Some tc qdisc rules are generated by old perl code
It prevent to unexpected override this code by python.
|
|
Add a new method which supports checking if the desired speed and duplex
setting is actually supported by the underlaying network interface card.
>>> from vyos.ethtool import Ethtool
>>> tmp = Ethtool('eth0')
>>> tmp.check_speed_duplex('100', 'full')
False
>>> tmp.check_speed_duplex('1000', 'full')
True
|
|
|
|
Commit d22f97af ("vyos.ethtool: T3163: rename unused methods for offload
validation") reworked the entire class on how data should be presented to the
user, but forgot to drop the is_fixed_lro() method.
|
|
Check eui64_old value before deleting
It can be empty or not ipv6 address.
(cherry picked from commit 0de23064b9d575ce0569839e3b4453a0c2e9dc1c)
|
|
In the past we always told ethtool to change the offloading settings, even if
this was not supported by the underlaying driver.
This commit will only change the offloading options if they differ from the
current state of the NIC and only if it's supported by the NIC. If the NIC does
not support setting the offloading options, a message will be displayed
for the user:
vyos@vyos# set interfaces ethernet eth2 offload gro
vyos@vyos# commit
[ interfaces ethernet eth2 ]
Adapter does not support changing large-receive-offload settings!
|
|
|
|
wireguard: T3763: Added check for listening port availability
|
|
We need to copy the configuration before this is done in super().update() as we
utilize self.set_dhcpv6() before this is done by the base class.
|
|
`print` was removed or replaced to `ValueError`, where possible.
|
|
Each wireguard interface requires a unique port for in and out
connections. This commit adds the new `vyos.util` function -
`check_port_availability`, and uses it to be sure that a port
that is planned to be used for wireguard interface is truly
available and not used by any other services (not only other
wireguard interfaces).
|
|
... there was a type setting ecp512 instead of ecp521.
|
|
When the interface name was stripped down from "eth0.201" to "eth" to determine
the appropriate interface section, VRRP interfaces got left out on the call
to rstrip().
VRRP interfaces now show up in "show interfaces" as they did in VyOS 1.2.
vyos@vyos:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
dum0 172.18.254.201/32 u/u
eth0 - u/u
eth0.10 172.16.33.8/24 u/u
eth0.201 172.18.201.10/24 u/u
eth1 10.1.1.2/24 u/u
eth1v10 10.1.1.1/24 u/u
eth2 - u/u
lo 127.0.0.1/8 u/u
::1/128
|
|
|
|
vyos@vyos# show interfaces pppoe
pppoe pppoe10 {
+ access-concentrator asdfg
authentication {
password bar
user foo
}
default-route force
no-peer-dns
source-interface eth0.202
}
vyos@vyos# python3
Python 3.9.2 (default, Feb 28 2021, 17:03:44)
[GCC 10.2.1 20210110] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from vyos.config import Config
>>> from vyos.configdict import get_interface_dict
>>> from vyos.configdict import leaf_node_changed
>>> conf = Config()
>>> base = ['interfaces', 'pppoe']
>>> tmp = get_interface_dict(conf, base, 'pppoe10')
>>> leaf_node_changed(conf, ['access-concentrator'])
>>> ['']
|
|
Now that MSS clamping is done on the "per-interface" level the entire PPPoE
stuff would have needed to get a full copy in GNU BASH for this or, participate
in the common library.
Add a new PPP ip-up script named 99-vyos-pppoe-callback which will call the
vyos.ifconfig.PPPoEIf.update() function to configure everything as done with
all other interfaces. This removes duplicated code for VRF assignment and route
installation when a PPPoE interface is brought up or down.
|
|
WireGuard, Tunnel and also PPPoE all need a ways to calculate a synthetic MAC
address used for the EUI64 link-local addresses. Instead of copying the code
from Tunnel to WireGuard to PPPoE, use a generic implementation.
|
|
|
|
|
|
level
Getting rid of "set firewall options" and move it from:
set firewall options interface ethX adjust-mss 1400
set firewall options interface ethX adjust-mss6 1400
to:
set interfaces ethernet ethX ip adjust-mss 1400
set interfaces ethernet ethX ipv6 adjust-mss 1400
In addition add an extra option called clamp-mss-to-pmtu instead of a value.
|
|
|
|
|
|
This reverts commit 29e438755c8bd2b9598a2016a3c42891f0cbfa1d.
|
|
|
|
commit_in_progress()
|
|
Inspired by the comments of https://unix.stackexchange.com/a/435317 use a more
robust approach. A service can be "active" but not "running" (e.g. restarting
with a configuration error). We can now test if a systemd unit is "activated"
and if it is "running" at all.
>>> from vyos.util import is_systemd_service_active
>>> from vyos.util import is_systemd_service_running
>>> is_systemd_service_active('ssh')
True
>>> is_systemd_service_running('sshd')
False
>>> is_systemd_service_running('ssh')
True
|
|
|
|
VyOS will automatically append the subsystem name (pppoe-server or sstp) when
something goes wrong. No need to hardcode this into the error string a second
time.
|
|
|
|
|
|
This reverts commit a2b959c50c96698da173b9c4720369a51442cc5c.
|
