| Age | Commit message (Collapse) | Author |
|---|
|
Feature detection is used to see if certain offload settings are available on
the given NIC.
|
|
vyos.ethtool: T6083: use JSON input data for ring-buffer methods
|
|
|
|
|
|
|
|
configdep: T5839: remove trivially redundant config dependency calls
|
|
vyos.ethtool: T6070: fix EEE reading the incorrect status line
|
|
|
|
|
|
required
|
|
EEE enabled status is on the 2nd line of ethtool output and not the 3rd. Subsequently, reading the 3rd line was causing an out-of-bounds access for the bnx2x driver as well.
|
|
for leases
|
|
|
|
|
|
T6029: Rewritten Accel-PPP services to an identical feature set
|
|
Removed dhcp-interface option (l2tp)
Added wins-server (sstp)
Added description (ipoe, pppoe, sstp, pptp)
Added exteded-script (l2tp, sstp, pptp)
Added shaper (ipoe, pptp, sstp, l2tp)
Added limits (ipoe, pptp, sstp, l2tp)
Added snmp ( ipoe, pptp,sstp, l2tp)
Refactoring and reformated code.
|
|
dhcpv6-server: T5992: Fix op-mode DHCP lease output + updates
|
|
rpki: T6034: move file based SSH keys for authentication to PKI subsystem
|
|
Due to Kea's lease file cleanup, the CSV file content is inconsistent. This commit makes changes to use the Kea control socket to fetch current lease information.
|
|
connected interfaces
Prior dhcpd behaviour implicitly handled requests for locally connected subnets. Kea requires an explicit link between subnets and an interface.
|
|
set pki openssh rpki private key ...
set pki openssh rpki public key ...
set pki openssh rpki public type 'ssh-rsa'
|
|
The `class_id_max` is wrong due to `tmp.sort` of Strings
If we have class 5 and class 10 we get sorted max value 5, expected 10
```
>>> tmp = ['5', '10']
>>> tmp.sort()
>>> tmp
['10', '5']
>>>
>>> hex(5+1)
'0x6'
>>>
>>> hex(10+1)
'0xb'
>>>
```
This way we get wrong default maximum class value:
```
tc qdisc replace dev eth1 root handle 1: htb r2q 444 default 6
```
Expect:
```
tc qdisc replace dev eth1 root handle 1: htb r2q 444 default b
```
Fix this converting Strings to Integers and get max value.
|
|
T5960: Rewritten authentication node in PPTP to a single view
|
|
op-mode: T4038: Python rewrite of image tools
|
|
init: T2044: only start rpki if cache is configured
|
|
This extends commit 9199c87cf ("init: T2044: always start/stop rpki during
system boot") to check the bootup configuration if an RPKI cache is defined.
Only start RPKI if this is the case.
|
|
Rewritten authentication node in accel-ppp services
to a single view. In particular - PPTP authentication.
|
|
The current calculation `r2q` is wrong as it uses `Floor division`
but expecting `division`
This way `math.ceil` calculate wrong value as we expect
round a number upward to its nearest integer
For example for speed 710 mbits expected value `444` but we get `443`
```
from math import ceil
MAXQUANTUM = 200000
speed = 710000000
speed_bps = int(speed) // 8
>>> speed_bps // MAXQUANTUM
443
>>> speed_bps / MAXQUANTUM
443.75
>>>
>>>
>>> ceil(speed_bps // MAXQUANTUM)
443
>>> ceil(speed_bps / MAXQUANTUM)
444
>>>
```
|
|
|
|
Commit b152b5202 ("configdict: T5894: add get_config_dict() flag with_pki")
added the generic PKI flag but if there was no PKI subsystem available
in the configuration, no pki dict key ever manifested in the resulting
dictionary requested by the caller.
This is different to the old behavior (which each caller implementing the call
itself) where there always was a pki key present - even if it was empty.
This triggered a bug in the IPSec script
Traceback (most recent call last):
File "/usr/libexec/vyos/conf_mode/vpn_ipsec.py", line 600, in <module>
verify(ipsec)
File "/usr/libexec/vyos/conf_mode/vpn_ipsec.py", line 372, in verify
verify_pki_rsa(ipsec['pki'], rsa)
~~~~~^^^^^^^
KeyError: 'pki'
As it wanted to verify keys, but there was no pki dictionary key available.
This commit restores the previous behavior.
|
|
qos: T5848: Add triple-isolate option to CAKE policy config
|
|
dhcpv6: T3771: Installation of routes for delegated prefixes, add excluded-prefix to PD
|
|
T5971: Rewritten ppp options in accel-ppp services
|
|
T4839: firewall: Add dynamic address group in firewall configuration
|
|
ddclient: T5966: Adjust dynamic dns config address subpath
|
|
T5974: Fix QoS shape bandwidth and ceil calculation for default
|
|
Rewritten 'ppp-options' to the same view in all accel-ppp services.
Adding IPv6 support to PPTP.
|
|
|
|
|
|
appropiate commands to populate such groups using source and destination address of the packet.
|
|
|
|
|
|
|
|
The default `bandwidth` and `ceiling` should calculate values
based on <tag> bandwidth but currently it gets the value from
qos.base `/sys/class/net/{self._interface}/speed`
```
set qos policy shaper SHAPER bandwidth '20mbit'
set qos policy shaper SHAPER default bandwidth '95%'
set qos policy shaper SHAPER default ceiling '100%'
```
It causes wrong calculations for class `default` i.e
950Mbit for bandwidth (expected 95% of bandwidth, 19Mbit)
1Gbit for ceil (expected 100% of bandwidth, 20Mbit)
Gets incorrect values
```
r4# tc class show dev eth1
class htb 1:1 root rate 20Mbit ceil 20Mbit burst 1600b cburst 1600b
class htb 1:a parent 1:1 leaf 8053: prio 0 rate 200Kbit ceil 200Kbit burst 1Mb cburst 1600b
class htb 1:b parent 1:1 leaf 8054: prio 7 rate 950Mbit ceil 1Gbit burst 15200b cburst 1375b
```
Fix this
|
|
Typo (missaligned -/_) in the code causes hw-tc-offload to never be enabled in
the underlaying hardware via ethtool.
|
|
|
|
|
|
T5958: QoS add basic implementation of policy shaper-hfsc
|
|
If we have QoS policy shaper class match `vif` (VLAN) we have to
use `basic match "meta(vlan mask 0xfff eq xxx)` instead of
`action policy`
Actual incorrect TC filter:
tc filter add dev eth1 parent 1: protocol all prio 1 action police rate 100000000 burst 15k flowid 1:64
The correct TC filter after fix:
tc filter add dev eth1 parent 1: protocol all prio 1 basic match "meta(vlan mask 0xfff eq 100)" flowid 1:64
|
|
|
