| Age | Commit message (Collapse) | Author |
|---|
|
In 558e1ca9, we found that the interface created by a test case was not
cleaned up completely, which led to the destruction of smoke test.
But in fact, the test case function retained an invalid deletion
configuration code. We added a repair patch and forgot to delete the invalid code.
Now we delete it
|
|
|
|
|
|
|
|
equipment
According to the consensus, the specific behavior of a VLAN aware bridge should conform
to the behavior of professional equipment. This commit makes a significant change to the
behavior of VLAN aware bridge, and has the following behaviors:
1. Disable `vif 1` configuration
2. When the VLAN aware bridge is enabled, the parent interface is always VLAN 1
3. When `native-vlan` is not configured, the default behavior of the device is `native-vlan 1`
4. The VLAN ids forwarded by the bridge are determined by `vif`
5. It has an `enable-vlan` node to enable VLAN awareness
6. VLAN configuration is allowed only when VLAN aware bridge is activated
|
|
|
|
|
|
|
|
Commit ef629504d4 ("smoketest: mirror: drop testcase") dropped the smoketests
entirely as they have been programmed in a wrong way leading to outages on live
development systems which used dummy interfaces for management traffic.
|
|
|
|
This reverts parts of commit c4048b2047f693436b38196632cddf65beb67a86 because
when tear-downing config session entire interface paths are removed with non
test related interface (all dummy interfaces) this breaks e.g. remote
connections when connected to one of the dummy interface IP addresses for
management.
|
|
Commit 29e32d39 ("smoketest: T1466: add eapol tests") renamed interface
methods of class BasicInterfaceTest, those change was not reflected in
every derived class.
|
|
|
|
|
|
|
|
|
|
In #601, I provided a basic patch. Under this patch, I rely on vif to
detect the vlan id range that the bridge should flow through,
which may lead to greater redundancy in the configuration,
so I am considering detecting effective vlan filters In setting the range
of vlan id that is required to flow through the bridge,
I use set() to complete the deduplication of this vlan id
and set it to the bridge uniformly (at the same time,
I slightly modified the smoke test script)
|
|
|
|
Every interface knows if it is part of a bridge or not - except a VLAN (VIF)
interface. Also VLANs should be aware of its master bridge.
Add a testcase to ensure when VIFs on an interface change the bridge does not
loos one of it's members.
|
|
vyos-smoketest-integration (T2832)
* 'master' of github.com:vyos/vyos-smoketest: (153 commits)
pppoe-server: test some more values
lcd: adjust to cli changes
lcd: adapt test to new CLI design
pppoe-server: initial smoketest with local and radius auth
pppoe: validate dhcpv6 client will be started
wireless: validate hostapd/wpa_supplicant is running
pppoe: sync to new dhcpv6-pd cli
anyconnect: T2812: add basic testing
ethernet: check interface disable state
router-advert: check 'infinity' option in script logic
ssh: config file is now volatile (moved to /run)
ipv6: link-local: test address assignment on interfaces
router-advert: add initial test
mdns-repeater: add basic test
pseudo-ethernet: extend smoketests with VIFs
l2tpv3: add initial interface test
wireless: use library function for loading kernel modules
ethernet: test "ip" subtree of interface for e.g. ARP settings
pppoe: use assertEqual()
service: bcast-relay: add initial tests
...
|
