| Age | Commit message (Collapse) | Author |
|---|
|
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as")
added support for a new CLI option when the local-as is changed for a specified
neighbor or peer-group.
There was an error in the CLI / design as the "replace-as" option can only be
used when "no-prepend" is defined. Thus "no-prepend" became a <node> and
the new "replace-as" leafNode is now a child of "no-prepend".
|
|
|
|
Commit 474db49a ("bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets
differ") made it possible to specify a whitelist separated list of route-targets,
this is now validated through the smoketests.
|
|
This adds the following new commands:
set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in
set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
|
|
|
|
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast rd vpn export
* set protocols bgp address-family ipv6-unicast rd vpn export
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575)
* set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commit 4f9aa30f ("vrf: bgp: T3523: add route-map support for kernel routes")
added the possibility to also filter BGP routes towards the OS kernel, but the
smoketests failed. Reason was a non working CLI command applied to bgpd.
Thus the VRF route-map and the BGP configuration is now split into two templates,
one to be used for each daemon (zebra and bgpd).
Nevertheless one more bug was found in vyos.frr which currently does not suppoort
calling modify_section() inside a configuration "block". See [1] for more info.
[1]: https://phabricator.vyos.net/T3529
|
|
When deleting a route-map, prefix-list or access-list, we must ensure that
this routing policy is not referenced by any other protocol or policy.
When trying to remove a policy still in use, raise an error.
|
|
In this commit we add more address families within
BGP. This should bring VyOS the ability to enable
the rest of the capabilities within FRR.
Co-authored-by: Cheeze_It <none@none.com>
|
|
Removing the Zebra/Linux Kernel route-map added by "set protocols bgp route-map"
was not removed once applied. This was because the removal must happen within
the zebra daemon and not bgpd.
|
|
|
|
|
|
Every time when set configuration bgp, you need set AS number. There is very
less benefit in this system so the AS number is moved from a tagNode level down
to a leafNode with the name "local-as", same as on the neighbor or peer-group
level.
This changes the CLI configuration from:
set protocols bgp 100 neighbor 10.10.1.2 remote-as 200
to
set protocols bgp local-as 100
set protocols bgp neighbor 10.10.1.2 remote-as 200
|
|
Currently every smoketest does the setup and destruction of the configsession
on its own durin setUp(). This creates a lot of overhead and one configsession
should be re-used during execution of every smoketest script.
In addiion a test that failed will leaf the system in an unconsistent state.
For this reason before the test is executed we will save the running config
to /tmp and the will re-load the config after the test has passed, always
ensuring a clean environment for the next test.
|
|
Instead of having the dynamic routing protocols OSPF and BGP residing under
the "protocols vrf <name> [ospf|bgp]" nodes, rather move them directly under
the "vrf name <name> protocols [ospf|bgp]" node. Now all VRF related parts
are placed under the same root node.
This eases the verify steps tremendously, as we do not need to check wheter a
VRF eists or not, it will always exist as we operate under a child node.
|
|
|
|
* set protocols bgp ASN address-family ipv4-unicast maximum-paths
* set protocols bgp ASN address-family ipv4-unicast maximum-paths-ibgp
* set protocols bgp ASN address-family ipv6-unicast maximum-paths
* set protocols bgp ASN address-family ipv6-unicast maximum-paths-ibgp
|
|
Commit 4bf55f97 ("BGP: T2100: Adding RFC8212 option toggle.") added a CLI option
to enable RFC8212 ebgp-requires-policy checks. The extended smoketests assumed
that this will lead to an FRR configuration line of "bgp ebgp-requires-policy" -
which is not the case as this is a default option and FRR hides default
options from the config.
In order to properly verify this functionality we must conduct the negative test
and ensure the option is not present in the CLI at all.
|
|
bgp: T2100: Changing RFC8212 behavior and option toggle
|
|
In this commit we add the default operation within BGP
to have RFC8212 disabled for eBGP routes. This default
should preserve the normal behavior for VyOS from earlier
releases of FRR to the current latest release. Another
option that we add is the ability to toggle whether or
not RFC8212 is enabled or disabled.
|
|
|
|
* protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-all
* protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-per-as
* protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-all
* protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-per-as
|
|
|
|
|
|
The following options were not represented in the Jinja2 template:
- port
- advertisement-interval
- strict-capability-match
In addition the smoketests have been extended to support IPv6 neighbors, too.
|
|
|
|
This commit provides the implementation of the OSPF CLI with a Jinja2 template
that is loaded by FRR reload.
|
|
|
|
This is an amendment to commit 5ab6882f ("bgp: T2347: bugfix import/export
route-map") which did not take care about fixing the other two if/elif
statements.
|
|
|
|
|
|
|
|
|
|
This reverts commit e7dd8c17d527aeb31b93b966c59a311f7506b906.
|
|
|
|
|
