| Age | Commit message (Collapse) | Author |
|---|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
Commit 6e621e42f ("bgp: T5338: simplify XML and code handling") hat a wrong if
branch when handling the check if an interface belongs to the proper VRF when
MPLS forwarding is used.
This has been fixed.
|
|
Added 'protocols bgp interface <int> mpls forwarding' feature.
It is possible to permit BGP install VPN prefixes without transport labels.
This configuration will install VPN prefixes originated from an e-bgp session,
and with the next-hop directly connected.
|
|
|
|
|
|
|
|
|
|
|
|
Replace links to the phabricator site from https://phabricator.vyos.net to
https://vyos.dev
|
|
|
|
1. Fixed: If rd and route-target are used in VRF, can not use "import vrf"
in the same VRF in the same AFI/SAFI.
2. Fixed: If rd and route-target is used in VRF, this VRF can not be in
the list of command "import vrf" in the same AFI/SAFI but in
other VRFs.
3. Fixed: Do not allow to delete vrf if it is used in import list
of other vrfs.
4. Added smoketests to check "import vrf" issues.
|
|
|
|
Add new VyOS CLI command:
set protocols bgp parameters bestpath peer-type multipath-relax
This command specifies that BGP decision process should consider paths from all
peers for multipath computation. If this option is enabled, paths learned from
any of eBGP, iBGP, or confederation neighbors will be multipath if they are
otherwise considered equal cost. [1]
[1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
|
|
|
|
|
|
* https://github.com/Cheeze-It/vyos-1x:
bgp: T4257: Changing BGP "local-as" to "system-as"
|
|
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
bgp: T4257: Changing BGP "local-as" to "system-as"
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add new bgp parameter 'no-suppress-duplicates'
set protocols bgp parameters no-suppress-duplicates
|
|
The BGP conditional advertisement feature uses the non-exist-map or the
exist-map and the advertise-map keywords of the neighbor advertise-map command
in order to track routes by the route prefix.
non-exist-map
=============
* If a route prefix is not present in the output of non-exist-map command, then
advertise the route specified by the advertise-map command.
* If a route prefix is present in the output of non-exist-map command, then do
not advertise the route specified by the addvertise-map command.
exist-map
=========
* If a route prefix is present in the output of exist-map command, then
advertise the route specified by the advertise-map command.
* If a route prefix is not present in the output of exist-map command, then do
not advertise the route specified by the advertise-map command.
This feature is useful when some prefixes are advertised to one of its peers
only if the information from the other peer is not present (due to failure in
peering session or partial reachability etc).
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peer.
CLI nodes can be found under:
* set protocols bgp neighbor <ip> address-family <afi> conditional-advertisement
* set protocols bgp peer-group <p> address-family <afi> conditional-advertisement
|
|
In the past a peer-group was only assigned to the BGP process but not bound
to any neighbor. This has been changed.
|
|
This command is applicable at the global level and at an individual bgp level.
If applied at the global level all bgp instances will wait for fib installation
before announcing routes and there is no way to turn it off for a particular
BGP vrf.
|
|
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers,
but preserve their configurations. The peers are notified in accordance with
RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode
Administrative Shutdown prior to terminating connections.
This global shutdown is independent of the neighbor shutdown, meaning that
individually shut down peers will not be affected by lifting it.
|
|
This command enables rejection of incoming and outgoing routes having AS_SET
or AS_CONFED_SET type.
|
|
This command allows user to prevent session establishment with BGP peers with
lower holdtime less than configured minimum holdtime.
When this command is not set, minimum holdtime does not work.
|
|
Whenever BGP peer address becomes unreachable we must bring down the BGP
session immediately. Currently only single-hop EBGP sessions are brought down
immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to
bring down the sessions.
This new configuration option helps user to teardown BGP sessions immediately
whenever peer becomes unreachable.
This configuration is available at the bgp level. When enabled, configuration
is applied to all the neighbors configured in that bgp instance.
|
|
Set the period to rerun the conditional advertisement scanner process.
The default is 60 seconds.
|
|
|
|
|
|
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as")
added support for a new CLI option when the local-as is changed for a specified
neighbor or peer-group.
There was an error in the CLI / design as the "replace-as" option can only be
used when "no-prepend" is defined. Thus "no-prepend" became a <node> and
the new "replace-as" leafNode is now a child of "no-prepend".
|
|
|
|
Commit 474db49a ("bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets
differ") made it possible to specify a whitelist separated list of route-targets,
this is now validated through the smoketests.
|
|
This adds the following new commands:
set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in
set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
|
|
|
|
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast rd vpn export
* set protocols bgp address-family ipv6-unicast rd vpn export
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575)
* set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
|
|
|
|
|
|
|
|
|
|
|
|
|
