summaryrefslogtreecommitdiff
path: root/smoketest/scripts/cli
AgeCommit message (Collapse)Author
2022-09-17smoketest: accel-ppp: revise base class to reduce amout of redundant codeChristian Poessinger
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-09-15smoketest: ethernet: rfs: T4689: also test default "0" caseChristian Poessinger
In addition to verify the queue lengths when CLI option is set, we also need to verify that all values are resetted back to "0" which is the Kernel default.
2022-09-15Merge branch 'T4689' of https://github.com/jack9603301/vyos-1x into currentChristian Poessinger
* 'T4689' of https://github.com/jack9603301/vyos-1x: rfs: T4689: Support RFS(Receive Flow Steering)
2022-09-15smoketest: nhrp: T2199: fix nftables rule/chain namesChristian Poessinger
2022-09-15rfs: T4689: Support RFS(Receive Flow Steering)jack9603301
2022-09-15smoketest: conntrack: T4691: lower test value for nf_conntrack_tcp_max_retransChristian Poessinger
The old value of 1024 is no longer supported by the most recent Kernel
2022-09-14firewall: nat66: policy: T2199: Fix smoketests for nftables updated outputsarthurdev
2022-09-14Merge pull request #1534 from sarthurdev/firewall_interfacesChristian Poessinger
firewall: zone-policy: T2199: T4605: Refactor firewall, migrate zone-policy
2022-09-13isis: T4693: Fix ISIS segment routing configurationsCheeze_It
This change is to fix a bug in which ISIS segment routing was broken due to a refactor. This change also is going to introduce a smoketest to make sure this is caught in the future.
2022-09-13zone-policy: T2199: Migrate zone-policy to firewall nodesarthurdev
2022-09-13policy: T2199: Typo in policy route smoketest teardownsarthurdev
2022-09-13firewall: T4605: Rename filter tables to vyos_filtersarthurdev
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-09-12Revert "rfs: T4689: Support RFS(Receive Flow Steering)"Christian Poessinger
This reverts commit 53355271a2864d844daca89a064c21e514e10adb.
2022-09-12rfs: T4689: Support RFS(Receive Flow Steering)jack9603301
2022-09-07T1024: Firewall and Policy route: add option to match dscp value, both on ↵Nicolas Fort
firewall and in policy route
2022-09-06T4670: policy route: extend matching criteria for policy route and route6. ↵Nicolas Fort
Matching criteria added: ttl/hoplimit and packet-length
2022-09-03firewall: T4651: re-implement packet-length CLI option to use <multi/>Christian Poessinger
2022-09-03smoketest: firewall: add re-usable variables when running testcasesChristian Poessinger
2022-09-02Merge branch 'T4651' of https://github.com/nicolas-fort/vyos-1x into firewallChristian Poessinger
* 'T4651' of https://github.com/nicolas-fort/vyos-1x: Firewall: T4651: Change proposed cli from ip-length to packet-length Firewall: T4651: Add options to match packet size on firewall rules.
2022-09-01Firewall: T4651: Change proposed cli from ip-length to packet-lengthNicolas Fort
2022-08-28smoketest: T4652: upgrade PowerDNS recursor to 4.7 seriesChristian Poessinger
2022-08-27Firewall: T4651: Add options to match packet size on firewall rules.Nicolas Fort
2022-08-26Merge pull request #1482 from sever-sever/T4631Christian Poessinger
nat66: T4631: Add port and protocol to nat66 conf
2022-08-26smoketest: T4631: Extend smoketes fot nat66 protocolViacheslav Hletenko
2022-08-25telegraf: T4617: add VRF supportChristian Poessinger
2022-08-25Merge pull request #1478 from sever-sever/T4622Christian Poessinger
firewall: T4622: Add TCP MSS option
2022-08-24smoketest: bgp: T4634: validate "disable-connected-check" optionChristian Poessinger
2022-08-22bridge: T4632: vlan aware bridge lacks CPU forwardingChristian Poessinger
The VLAN aware bridge was forwarding traffic between member ports, but traffic destined torwards the CPU was dropped. This resulted in a gateway not reachable or DHCP leases that could not be handed out. Tested via: VyOS set interfaces bridge br0 enable-vlan set interfaces bridge br0 member interface eth1 allowed-vlan '10' set interfaces bridge br0 member interface eth1 allowed-vlan '20' set interfaces bridge br0 member interface eth1 allowed-vlan '30' set interfaces bridge br0 member interface eth1 allowed-vlan '40' set interfaces bridge br0 member interface eth1 native-vlan '40' set interfaces bridge br0 member interface eth2 allowed-vlan '30' set interfaces bridge br0 member interface eth2 allowed-vlan '20' set interfaces bridge br0 member interface eth2 allowed-vlan '10' set interfaces bridge br0 member interface eth2 allowed-vlan '40' set interfaces bridge br0 vif 10 address '10.0.10.1/24' set interfaces bridge br0 vif 20 address '10.0.20.1/24' set interfaces bridge br0 vif 30 address '10.0.30.1/24' set interfaces bridge br0 vif 40 address '10.0.40.1/24' Arista vEOS vlan 10,20,30,40 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 interface Vlan10 ip address 10.0.10.2/24 interface Vlan20 ip address 10.0.20.2/24 interface Vlan30 ip address 10.0.30.2/24 interface Vlan40 ip address 10.0.40.2/24 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk spanning-tree portfast Cisco vIOS interface GigabitEthernet0/0 ip address 10.0.40.3 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 10.0.10.3 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 10.0.20.3 255.255.255.0 ! interface GigabitEthernet0/0.30 encapsulation dot1Q 30 ip address 10.0.30.3 255.255.255.0 !
2022-08-18firewall: T4622: Add TCP MSS optionViacheslav Hletenko
Ability to drop|accept packets based on TCP MSS size set firewall name <tag> rule <tag> tcp mss '501-1460'
2022-08-15ocserv: openconnect: T4614: add support for split-dnsChristian Poessinger
set vpn openconnect network-settings split-dns <domain>
2022-08-15smoketest: ocserv: implement config file validationChristian Poessinger
2022-08-05nat66: T4598: Add exclude options in nat66Nicolas Fort
2022-08-05bgp: T4257: bugfixes after renaming "local-as" to "system-as"Christian Poessinger
2022-08-04Merge https://github.com/Cheeze-It/vyos-1x into currentChristian Poessinger
* https://github.com/Cheeze-It/vyos-1x: bgp: T4257: Changing BGP "local-as" to "system-as"
2022-08-04smoketest: macsec: T4537: validate macsec_csindex for both AES-GCM-128 and ↵Christian Poessinger
AES-GCM-256
2022-08-04smoketest: macsec: T4537: verify macsec_csindexChristian Poessinger
2022-08-03Merge pull request #1369 from nicolas-fort/T4480Daniil Baturin
T4480: webproxy: Add safe-ports and ssl-safe-ports for acl squid config
2022-07-31smoketest: bridge: T4565: changes to lower interfaces must not destroy VLAN ↵Christian Poessinger
aware bridge
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-07-25bgp: T4560: neighbor/peer-group local-as option is only allowed for eBGPChristian Poessinger
2022-07-25fastnetmon: T4556: Allow configure white_list_path and populate with ↵Adrian Almenar
hosts/networks that should be ignored.
2022-07-24graphql: T3993: add smoketest for GraphQL key authorizationJohn Estabrook
2022-07-22smoketest: router-advert: T4550: test deprecate-prefix & decrement-lifetime ↵Christian Poessinger
CLI option
2022-07-22smoketest: router-advert: use setUpClass()Christian Poessinger
2022-07-21smoketest: fastnetmon: T4555: add IPv6 supportChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 17:27:16 +0000