| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
logs: T3774: Added CLI options to control atop logs rotation
|
|
Added the ability to control the `/var/log/messages` rotation.
Renamed the option `maxsize` to `max-size`.
|
|
|
|
The BGP conditional advertisement feature uses the non-exist-map or the
exist-map and the advertise-map keywords of the neighbor advertise-map command
in order to track routes by the route prefix.
non-exist-map
=============
* If a route prefix is not present in the output of non-exist-map command, then
advertise the route specified by the advertise-map command.
* If a route prefix is present in the output of non-exist-map command, then do
not advertise the route specified by the addvertise-map command.
exist-map
=========
* If a route prefix is present in the output of exist-map command, then
advertise the route specified by the advertise-map command.
* If a route prefix is not present in the output of exist-map command, then do
not advertise the route specified by the advertise-map command.
This feature is useful when some prefixes are advertised to one of its peers
only if the information from the other peer is not present (due to failure in
peering session or partial reachability etc).
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peer.
CLI nodes can be found under:
* set protocols bgp neighbor <ip> address-family <afi> conditional-advertisement
* set protocols bgp peer-group <p> address-family <afi> conditional-advertisement
|
|
In the past a peer-group was only assigned to the BGP process but not bound
to any neighbor. This has been changed.
|
|
This command is applicable at the global level and at an individual bgp level.
If applied at the global level all bgp instances will wait for fib installation
before announcing routes and there is no way to turn it off for a particular
BGP vrf.
|
|
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers,
but preserve their configurations. The peers are notified in accordance with
RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode
Administrative Shutdown prior to terminating connections.
This global shutdown is independent of the neighbor shutdown, meaning that
individually shut down peers will not be affected by lifting it.
|
|
This command enables rejection of incoming and outgoing routes having AS_SET
or AS_CONFED_SET type.
|
|
This command allows user to prevent session establishment with BGP peers with
lower holdtime less than configured minimum holdtime.
When this command is not set, minimum holdtime does not work.
|
|
Whenever BGP peer address becomes unreachable we must bring down the BGP
session immediately. Currently only single-hop EBGP sessions are brought down
immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to
bring down the sessions.
This new configuration option helps user to teardown BGP sessions immediately
whenever peer becomes unreachable.
This configuration is available at the bgp level. When enabled, configuration
is applied to all the neighbors configured in that bgp instance.
|
|
Set the period to rerun the conditional advertisement scanner process.
The default is 60 seconds.
|
|
|
|
|
|
|
|
Background information [1]. Specifies whether an external control plane
(e.g. ip route encap/EVPN) or the internal FDB should be used.
[1]: https://legacy.netdevconf.info/2.2/slides/prabhu-linuxbridge-tutorial.pdf
|
|
|
|
|
|
|
|
|
|
(cherry picked from commit 1a814661a0ade01f144398b91dd6998e42018fdd)
|
|
Added CLI options to generate logrotate configuration file for atop logs
|
|
|
|
netns: T3829: Ability to configure network namespaces
|
|
|
|
(cherry picked from commit 55f6c1352fc5b2b8d051497e7fe97a4e62caf1fe)
|
|
(cherry picked from commit 3fb6f5a966c57cb0936b35c13655f0b3f36483c4)
|
|
Mark session as passive: a passive session will not attempt to start the
connection and will wait for control packets from peer before it begins
replying.
This feature is useful when you have a router that acts as the central node of
a star network and you want to avoid sending BFD control packets you don't
need to. The default is active-mode
|
|
|
|
tftp: T4012: Add TFTP VRF support
|
|
|
|
set vrf name foo protocols ospfv3
|
|
|
|
|
|
|
|
|
|
Every node in running config now has an explicit "exit" tag
|
|
FRR 7.5
router ospf
passive-interface default
no passive-interface eth0.202
Changed int FRR 8 to
interface eth0.202
no ip ospf passive
!
router ospf
ospf router-id 172.18.254.202
log-adjacency-changes detail
passive-interface default
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commit d75403f78aef0 ("dmvpn: T4010: Fix template ipsec profile rekey_time")
fixed an issue where the old IKE life_time config option was used. This no
longer exists and us named rekey_time for IKE.
This commit fixes the expected smoketest result.
|
|
We need to use a temporary variable when validating the tuple if address
is used. If not the else branch will always add the tuple to the list of
addresses used for listen-address.
|
|
|
|
|
