summaryrefslogtreecommitdiff
path: root/smoketest/scripts
AgeCommit message (Collapse)Author
2023-11-22Merge pull request #2527 from c-po/t5630-mru-part-2Christian Breunig
pppoe: T5630: make MRU default to MTU if unspecified
2023-11-22pppoe: T5630: make MRU default to MTU if unspecifiedChristian Breunig
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU in addition to already configurable MTU") and restores the bahavior that MRU defaults to MTU if MRU is not explicitly set. This was the behavior in VyOS 1.3.3 and below before we added ability to define the MRU value.
2023-11-22vxlan: T5759: change default MTU from 1450 -> 1500 bytesChristian Breunig
Found an odd behavior on Linux and the VyOS CLI implementation. If adding VXLAN interfaces using iproute2 the MTU differs depending on the creation syntax: ip -4 link add vxlan100 type vxlan dstport 4789 external df unset tos inherit \ ttl 16 nolearning vnifilter local 172.16.33.201 ip -4 link add vxlan200 type vxlan id 200 dstport 4789 local 172.16.33.201 dev eth0 ip -6 link add vxlan300 type vxlan id 300 dstport 4789 local 2001:db8:1::1 dev eth0 132: vxlan300: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN group default qlen 1000 link/ether 4e:fb:e3:f5:d9:59 brd ff:ff:ff:ff:ff:ff 133: vxlan200: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN group default qlen 1000 link/ether 0e:4e:f4:76:59:3f brd ff:ff:ff:ff:ff:ff 134: vxlan100: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether ba:b6:b7:0c:b1:37 brd ff:ff:ff:ff:ff:ff VyOS always sets a default MTU of 1450 bytes which is correct for IPv4 p2p links or multicast, but invalid for IPv6 p2p. Also this will break EVPN deployments as ethernet bridges with MTU < 1500 bytes are less fun. Increase default MTU to 1500 bytes. Migrate old configurations to use 1450 bytes if not specified otherwise on the CLI.
2023-11-22Merge pull request #2499 from c-po/t5753-vxlan-vnifilterChristian Breunig
vxlan: T5753: add support for VNI filtering
2023-11-21Merge pull request #2519 from c-po/t5762-vhost-portJohn Estabrook
http: T5762: rename "virtual-host listen-port" -> "virtual-host port"
2023-11-21smoketest: macsec: T5770: fix NameError: name 'cipher' is not definedChristian Breunig
2023-11-21macsec: T5770: enable iproute2 "encrypt on" stanzaGiga Murphy
2023-11-21http: T5762: rename "virtual-host listen-port" -> "virtual-host port"Christian Breunig
This complements commit f5e43b136 ("http: T5762: api: make API socket backend communication the one and only default") so we have a consistent port CLI node across VyOS components.
2023-11-20Merge pull request #2508 from c-po/t5762-https-api-socketDaniil Baturin
http: T5762: api: make API socket backend communication the one and only default
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy.
2023-11-19dhcp-client: T5760: add CLI option to pass user-class parameterChristian Breunig
Example: set interfaces ethernet eth0 dhcp-options user-class VyOS or set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53
2023-11-19dhcp-client: T5760: add constraints for dhclient string optionsChristian Breunig
The string data type specifies either an NVT ASCII string enclosed in double quotes, or a series of octets specified in hexadecimal, separated by colons. For example: set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO or set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f As of now there was no input validation performed.
2023-11-18vxlan: T5753: add support for VNI filteringChristian Breunig
In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to each customer. Without the ability of VNI filtering, we can not provide VXLAN tunnels with multiple tenants all requiring e.g. VLAN 10. To Test: set interfaces vxlan vxlan987 parameters external set interfaces vxlan vxlan987 source-interface eth0 set interfaces vxlan vxlan987 parameters vni-filter set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050 set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051 set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052 set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053 set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054 set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060 set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069 set interfaces bridge br0 member interface vxlan987 Add new op-mode command: show bridge vni Interface VNI ----------- ----------- vxlan987 10050-10054 vxlan987 10060 vxlan987 10069
2023-11-16Merge pull request #2481 from sever-sever/smoketest-apiChristian Breunig
smoketest: Extend HTTP-API tests
2023-11-14smoketest: Extend HTTP-API testsViacheslav Hletenko
2023-11-13pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
2023-11-13pim: T5733: fix CLI level of global PIM commandsChristian Breunig
2023-11-13igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp"
2023-11-13pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR.
2023-11-11Merge pull request #2471 from nicolas-fort/T5729Christian Breunig
T5729: firewall: switch to valueless in
2023-11-10T5729: firewall: switch to valueless in order to remove unnecessary ↵Nicolas Fort
<enable|disable> commands; log and state moved to new syntax.
2023-11-10ddclient: T5708: Fix VRF table generation in smoketestIndrajit Raychaudhuri
Ensure that the random VRF table name is 4 digits long, not 5 and stays within the the range of 100 - 65535.
2023-11-10ddclient: T5708: Additional smoketests for web-optionsIndrajit Raychaudhuri
Add additional smoketests for web-options validation. Also, format error messages to optionally include protocol name.
2023-11-08ddclient: T5708: Ensure password is always wrapped in quotesIndrajit Raychaudhuri
Migration to 3.11.1 follow-up: This should make `ddclient.conf` parsing more resilient to edge cases (particularly when `password` isn't the last option right before the host parameter). ddclient config parser applies special treatment to the password field and would unwrap the quotes automatically. Also, switch from now deprecated `use=no` to `use=disabled`.
2023-11-07T5716: Fix smoketest for accel-ppp limiter tbfViacheslav Hletenko
Limiter in the commit cf92295 was changed to `tbf` Fix smoketest
2023-11-05ddclient: T5708: Migration to 3.11.1 and related improvementsIndrajit Raychaudhuri
- Migrate to ddclient 3.11.1 and enforce debian/control dependency - Add dual stack support for additional protocols - Restrict usage of `porkbun` protocol, VyOS configuration structure isn't compatible with porkbun yet - Improve and cleanup error messages
2023-11-05ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-03Merge pull request #2431 from c-po/wireguard-t5707Christian Breunig
wireguard: T5707: remove previously deconfigured peer
2023-11-02wireguard: T5707: remove previously deconfigured peerChristian Breunig
Changing the public key of a peer (updating the key material) left the old WireGuard peer in place, as the key removal command used the new key. WireGuard only supports peer removal based on the configured public-key, by deleting the entire interface this is the shortcut instead of parsing out all peers and removing them one by one. Peer reconfiguration will always come with a short downtime while the WireGuard interface is recreated.
2023-11-02Merge pull request #2416 from c-po/evpn-mh-t5698Christian Breunig
T5698 EVPN ESI Multihoming
2023-11-02T5705: rsyslog: fix error when level=all. Replace <all> with wildcard <*>, ↵Nicolas Fort
as it's done with facility. Create basic smoketest for syslog
2023-11-01smoketest: vxlan: T5699: fix "external" CLI optionChristian Breunig
After commit cc7ba8824 ('vxlan: T5699: migrate "external" CLI know to "parameters external"') We also need to adjust the testcase for ARP/ND suppression.
2023-10-31Merge pull request #2413 from c-po/t5668-vxlanChristian Breunig
vxlan: T5668: add CLI knob to enable ARP/ND suppression
2023-10-30vxlan: T5699: migrate "external" CLI know to "parameters external"Christian Breunig
As we have a bunch of options under "paramteres" already and "external" is clearly one of them it should be migrated under that node as well.
2023-10-30vxlan: T5668: add CLI knob to enable ARP/ND suppressionChristian Breunig
In order to minimize the flooding of ARP and ND messages in the VXLAN network, EVPN includes provisions [1] that allow participating VTEPs to suppress such messages in case they know the MAC-IP binding and can reply on behalf of the remote host. In Linux, the above is implemented in the bridge driver using a per-port option called "neigh_suppress" that was added in kernel version 4.15. [1] https://www.rfc-editor.org/rfc/rfc7432#section-10
2023-10-30bgp: T5698: add support for EVPN MultihomingChristian Breunig
2023-10-30bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad'
2023-10-25T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher ↵Nicolas Fort
(valid for interfaces and groups) in firewal, nat and nat66.
2023-10-24Merge pull request #2355 from nicolas-fort/T5643Christian Breunig
T5643: nat: add interface-groups to nat. Use same cli structure for i…
2023-10-22T5299: Add missed option ceiling for QoS shaperViacheslav Hletenko
Add missed option `ceil` for QoS class 'trafficshaper'
2023-10-20T5667: BGP label-uniscat enable ecmpfett0
2023-10-19Merge pull request #2362 from nicolas-fort/T5541Christian Breunig
T5541: firewall zone: re add firewall zone-base firewall
2023-10-19Merge pull request #2344 from nicolas-fort/T5637Christian Breunig
T5637: add new rule at the end of base chains for default-actions and log capabilities
2023-10-16T5634: Smoketest add encryption ciphersViacheslav Hletenko
As `providers legacy default` option was deleted with insecure DES and Blowfish ciphers, the smoketest cannot pass without adding encyption ciphers Otherwise Oct 16 09:41:34 r4 openvpn-vtun5[9648]: DCO version: N/A Oct 16 09:41:34 r4 openvpn-vtun5[9648]: Cipher BF-CBC not supported Oct 16 09:41:34 r4 openvpn-vtun5[9648]: Exiting due to fatal error Fix the smoketest
2023-10-13T5541: firewall zone: re add firewall zone-base firewallNicolas Fort
2023-10-11T5643: nat: add interface-groups to nat. Use same cli structure for ↵Nicolas Fort
interface-name|interface-group as in firewall.
2023-10-11Merge pull request #2342 from sever-sever/T5165Viacheslav Hletenko
T5165: Implement policy local-route source and destination port
2023-10-08Merge pull request #2263 from Cheeze-It/currentViacheslav Hletenko
T5530: isis: Adding loop free alternate feature
2023-10-07Merge pull request #2335 from c-po/t5630-pppoe-mruDaniil Baturin
pppoe: T5630: allow to specify MRU in addition to already configurable MTU
2023-10-06T5637: add new rule at the end of base chains for default-actions. This ↵Nicolas Fort
enables log capabilities for default-action in base chains. And of course, add option for enabling log for default-action
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 07:10:56 +0000