summaryrefslogtreecommitdiff
path: root/smoketest
AgeCommit message (Collapse)Author
2021-12-08smoketest: getFRRconfig() now supports reading specified deamon configChristian Poessinger
2021-12-06smoketests: mpls: add initial basic testcaseChristian Poessinger
(cherry picked from commit 5b3ff8574c8265cf308b225c1a39503712f0b21d)
2021-12-04smoketest: vrrp: passwords are only allowed 8 characters longChristian Poessinger
2021-12-04smoketest: vrrp: delete VLAN interfaces in tearDown()Christian Poessinger
2021-12-03tftp: T4012: Add TFTP VRF supportDmitriyEshenko
2021-11-26smoketest: sstp: openconnect: Replace certificates pathDmitriyEshenko
2021-11-21smoketest: flow-accounting: add initial - basic - testcaseChristian Poessinger
(cherry picked from commit 526d29279a9daf4590538bf7495e00623cc4b40d)
2021-11-21smoketest: remove superfluous ConfigSession importChristian Poessinger
(cherry picked from commit commit 22e3558834784a8ca37f6335c15c58a631a7fe10)
2021-11-17snmp: T3996: fix invalid IPv6 localhost handling when using listen-addressChristian Poessinger
We need to use a temporary variable when validating the tuple if address is used. If not the else branch will always add the tuple to the list of addresses used for listen-address. (cherry picked from commit d13b91462487e090b32c0d1ecf9139a2271b4837)
2021-11-05smoketest: T3972: test removal of vif-c interfacesChristian Poessinger
(cherry picked from commit ab111d56410753929979b06899912ea036819405)
2021-10-31smoketest: config: add DMVPN hub and spoke examplesChristian Poessinger
(cherry picked from commit 062422db04f5ec6fd0a769f0d71faf4efa2d377f)
2021-10-22tunnel: T3925: fix configtest - source-interface does not work with gretapChristian Poessinger
(cherry picked from commit 594c57d9b16cac5810f796f15ad7458bd0877435)
2021-10-21tunnel: T3925: dhcp-interface was of no use - use source-interface insteadChristian Poessinger
2021-10-01smoketest: vrrp: validate rfc3768-compatibility is not setChristian Poessinger
2021-09-23smoketest: T3850: use as complicated as possible public-key nameChristian Poessinger
(cherry picked from commit 6187ce264a39cd72285f6cb73cc746a04268c253)
2021-09-22smoketest: vrrp: delete interface vifs after testChristian Poessinger
(cherry picked from commit 6935c263f5022896e96bec9daa8a5ba29b04b51b)
2021-09-21vrrp: keepalived: T616: move configuration to volatile /run directoryChristian Poessinger
Move keepalived configuration from /etc/keepalived to /run/keepalived. (cherry picked from commit b243795eba1b36cadd81c3149e833bdf5c5bea70)
2021-09-21smoketest: vrrp: T616: add basic smoketest to verify keepalived configurationChristian Poessinger
(cherry picked from commit ddda0d66faa73900ed2b8fec1dde38ffc4a49fcd)
2021-09-20smoketest: use assertNotIn() in base interface testChristian Poessinger
(cherry picked from commit 61aed576582cedc38cafa758651f1446d4ba4d34)
2021-09-19smoketest: dhcp: T3841: validate ping-check optionChristian Poessinger
(cherry picked from commit 88f71fc6b5b3bd89623c3d5f0af1c7dbd19f0996)
2021-09-19smoketest: dhcp: T3672: adjust to new CLI syntaxChristian Poessinger
(cherry picked from commit a85ff749bb84d562b711171768cdc92498ad7406)
2021-09-19dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6. (cherry picked from commit e2f9f4f4e8b2e961a58d935d09798ddb4e1e0460)
2021-09-19dhcp-server: T1968: allow multiple static-routes to be configuredChristian Poessinger
vyos@vyos# show service dhcp-server shared-network-name LAN { subnet 10.0.0.0/24 { default-router 10.0.0.1 dns-server 194.145.150.1 lease 88 range 0 { start 10.0.0.100 stop 10.0.0.200 } static-route 192.168.10.0/24 { next-hop 10.0.0.2 } static-route 192.168.20.0/24 { router 10.0.0.2 } } } (cherry picked from commit a4440bd589db645eb99f343a8163e188a700774c)
2021-09-11Merge pull request #1001 from erkin/equuleusDaniil Baturin
T3275: conntrack: Backport XML/Python implementation of conntrack CLI
2021-09-10T3275: conntrack: Backport XML/Python implementation of conntrack CLIerkin
2021-09-06ifconfig: T3806: "ipv6 address no_default_link_local" required for MTU < 1280Christian Poessinger
This commit also extends the smoketest to verify that the exception for this error is raised. (cherry picked from commit 84a429b41175b95634ec9492e0cf3a564a47abdd)
2021-09-06smoketest: config: add DHCP name-server to dialup-router-medium-vpn configChristian Poessinger
T3804 changed how DHCP servers from DHCP interfaces are read in and passed to the system. The config migrator is tested with this addition. (cherry picked from commit 0a82936aff8bbfcc6253f4767ea82805525c47ec)
2021-09-02login: T3792: bugfix for usernames containing a hyphenChristian Poessinger
While migrating to get_config_dict() in commit e8a1c291b1 ("login: radius: T3192: migrate to get_config_dict()") the user-name was not excluded from mangling (no_tag_node_value_mangle=True). This resulted in a username "vyos-user" from CLI to be actually created as "vyos_user" on the system. This commit also adds respective Smoketests to prevent this in the future. (cherry picked from commit 658de9ea0fbe91e593f9cf0a8c434791282af100)
2021-08-27smoketest: nat: T3781: temporary disable testcaseChristian Poessinger
2021-08-26smoketest: config: add example configs from current branchChristian Poessinger
This commit adds configurations usable for "make testc" that are known to be good on VyOS 1.2 installations - thus they must work on 1.3.
2021-08-26smoketest: config: drop empty newline at EOF for "isis-small" testChristian Poessinger
(cherry picked from commit dbe406c8b0d174f7ef3f80d189521cddd6cca5ef)
2021-08-25smoketest: config: add tunnel-broker configurationChristian Poessinger
2021-08-25isis: T3779: backport entire 1.4 (current) featuresetChristian Poessinger
As IS-IS is a new feature and the CLI configuration changed from 1.3 -> 1.4 (required by T3417) it makes sense to synchronize the CLI configuration for both versions. This means backporting the CLI from 1.4 -> 1.3 to not confuse the userbase already with a brand new feature. As 1.3.0-epa1 is on the way and should not contain any CLI changes afterwards, this is the perfect time.
2021-08-22bridge: T3137: backport vlan features from 1.4 currentChristian Poessinger
2021-08-22smoketest: base: abbreviate path to /proc/sys/netChristian Poessinger
(cherry picked from commit 8c1c9e1c37be9e88e8a7ea0182a43a3396eff623)
2021-08-15smoketest: shim: wait for commit to be completedChristian Poessinger
This completes commit e7d841d285 ("smoketest: shim: remove superfluous sleep() in getFRRconfig()"). (cherry picked from commit 9b21e4a769385514f0bf625d665d588266dc6de4)
2021-08-15smoketest: shim: remove superfluous sleep() in getFRRconfig()Christian Poessinger
The sleep was intended to handle a FRR issue where the config was/is somehow now available in vtysh even with the commit was done. This rather feels like a race-condition and is fixed in the subsequent commit. (cherry picked from commit e7d841d2854d8e0ebb95cb6f0bd83e84fba3a9fa)
2021-07-31router-advert: T2745: use template common coding style in for loopsChristian Poessinger
(cherry picked from commit f89a0cfc7d0d908cbe1715b760b07926ffa3f7b9)
2021-07-26smoketest: config: azure: also utilize "default-esp-group" featureChristian Poessinger
(cherry-picked from commit 57fa30de709afe31aeddb5fedf565ce44c5ba937)
2021-07-25smoketest: add shim for every test to re-use common tastsChristian Poessinger
Currently every smoketest does the setup and destruction of the configsession on its own durin setUp(). This creates a lot of overhead and one configsession should be re-used during execution of every smoketest script. In addiion a test that failed will leaf the system in an unconsistent state. For this reason before the test is executed we will save the running config to /tmp and the will re-load the config after the test has passed, always ensuring a clean environment for the next test. (cherry picked from commit 0f3def974fbaa4a26e6ad590ee37dd965bc2358f)
2021-07-25ifconfig: backport ifconfig framework from 1.4 to support new tunnel optionsChristian Poessinger
It is easier to backport the entire vyos.ifconfig library from 1.4 instead of backporting single pieces which are required to add new feature to the tunnel interface section. In addition that both libraries are now back in sync it will become much easier to backport any other new feature introduced in VyOS 1.4!
2021-07-25smoketest: openvpn: fix deprecated option warning for key generationChristian Poessinger
WARNING: Using --genkey --secret filename is DEPRECATED. Use --genkey secret filename instead.
2021-07-23login: T3699: verify system username does not conflict with Linux base usersChristian Poessinger
2021-07-11smoketest: T3637: add testcase for vrf bind-to-all optionChristian Poessinger
(cherry picked from commit 63a094b339296d97ecf3b87eac8d1d3ce8fadd3a)
2021-06-30dhcpdv6: T3658: add support for dhcpdv6 fixed-prefix6Brandon Stepler
(cherry picked from commit 2318c874c4ec43076c2664e473f7273928d9f2a6)
2021-06-29pppoe-server: T3405: Add interface cache featureDmitriyEshenko
(cherry picked from commit 065c6b620cb52a3235c7b6e210d34dc8cb943b95)
2021-06-25openvpn: T1704: drop deprecated disable-ncp optionChristian Poessinger
(cherry picked from commit 6b7b19c93f90839549dd668116c4da2f38cfdc66) VyOS 1.3 will ship OpenVPN 2.5.1 and thus it is the perfect timing to still remove this option before introducing it in a new LTS release.
2021-06-25T3649: bonding: Add additional hash policiesDmitriyEshenko
(cherry picked from commit 9431383abc926ca4513928c56924e942ea250cc8)
2021-06-21smoketest: ensure /config is a directoryChristian Poessinger
(cherry picked from commit 3ae265b300544b855b1b32862c901045ee146934)
2021-06-13pppoe: T3621: validate that both username and password are setChristian Poessinger
A validator is missing checking that if authentication is used on a PPPoE interface, both username and password are set.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 18:42:06 +0000