summaryrefslogtreecommitdiff
path: root/smoketest
AgeCommit message (Collapse)Author
2020-11-14bridge: T3042: Better fix implementation errorsjack9603301
In #601, I provided a basic patch. Under this patch, I rely on vif to detect the vlan id range that the bridge should flow through, which may lead to greater redundancy in the configuration, so I am considering detecting effective vlan filters In setting the range of vlan id that is required to flow through the bridge, I use set() to complete the deduplication of this vlan id and set it to the bridge uniformly (at the same time, I slightly modified the smoke test script)
2020-11-13openvpn: T3051: fix smoketestChristian Poessinger
After commit 943a4a50 ("openvpn: T3051: fix creation of ifconfig-pool for client communication") the smoketests had nod been adjusted correctly. This has been fixed.
2020-11-13vyos.template: provide general is_ip(v4|v6) helpersChristian Poessinger
We had two places were the is_ip, is_ipv4 and is_ipv6 helpers had been defined. All places now have been converged into vyos.template as they are used both in the Jinja2 templates and also in our scripts.
2020-11-10bridge: T3042: Support VLAN filter and VLAN sub-interface on the bridgejack9603301
2020-11-07smoketest: tunnel: enable common MTU testcaseChristian Poessinger
2020-11-07smoketest: tunnel: add individual tunnel verification logicChristian Poessinger
2020-11-06openvpn: T3051: fix multiple pushed routes to preconfigured clientsChristian Poessinger
2020-11-03wireless: T3042: move wifi-regulatory-domain into individual interface ↵Christian Poessinger
definition
2020-11-03wireless: T3034: add WPA3 supportChristian Poessinger
2020-11-01smoketest: openvpn: remove debug code for faster test runsChristian Poessinger
There have been leftovers to bypass testcases by simply just "return True" on most of the testcases.
2020-11-01openvpn: T2994: re-add ifconfig-pool statement in server configChristian Poessinger
Re-organize the template code and add addtitional Jinja2 filters for processing the ifconfig-pool statement. This reverts the changes from commit 7e546be9 ("openvpn: T2994: temporary revert to 1.2 crux behavior for client pools").
2020-11-01openvpn: T2994: remove workarounds for individual ipv4 and ipv6 keysChristian Poessinger
Remove workaround which split (local|remote)_address and also subnet keys into individual keys for the assigned IP address family (4/6). During template rendering check IP version by introducing new ipv4 and ipv6 Jinja2 filters {% if foo | ipv4 %} or {% if bar | ipv6 %} options.
2020-11-01smoketest: VyOS config files do not ned +x optionChristian Poessinger
2020-10-31smoketest: openvpn: fix testcase for server statementChristian Poessinger
After commit 7e546be921 ("openvpn: T2994: temporary revert to 1.2 crux behavior for client pools") also adjust the testcase to not expect the "nopool" statement on the server command.
2020-10-31smoketest: openvpn: test server mode "replace-default-route"Christian Poessinger
2020-10-30smoketest: openvpn: extend server verify() test with TLS auth keysChristian Poessinger
2020-10-30smoketest: openvpn: test server mode verify() stepsChristian Poessinger
2020-10-30smoketest: openvpn: test site2site mode verify() stepsChristian Poessinger
2020-10-30smoketest: openvpn: test client mode verify() stepsChristian Poessinger
2020-10-30smoketest: ssh: add bond to vrf testcaseChristian Poessinger
Bind sshd to given VRF and check if it really runs in the VRF context.
2020-10-29verify: T2587: allow MTU < 1280 when IPv6 is disabled on an interfaceChristian Poessinger
2020-10-28smoketest: accel: T2631: check disable-accounting optionChristian Poessinger
2020-10-28vyos.util: T2995: rename vyos_dict_search() -> dict_search()Christian Poessinger
Renamed using snippet below: ---------------------------- for file in $(find . -name "*.py") do sed -i "s/vyos_dict_search/dict_search/" $file done
2020-10-26smoketest: T3003: extend framework to load arbitrary config fileJohn Estabrook
2020-10-19smoketest: openvpn: test VRF assignmentChristian Poessinger
2020-10-19smoketest: openvpn: ensure interfaces do not persist after deletionChristian Poessinger
2020-10-18smoketest: openvpn: add server (P-t-MP) and site2site testcasesChristian Poessinger
2020-10-18openvpn: T2969: force creation of tunnel interfacesChristian Poessinger
A lot of VyOS code requires the Kernel interface to be present in order to properly work and adjust the interface to the users CLI intends (alias, ipv6, vrf - just to name a few). OpenVPN - when run in client mode - only creates the interface (e.g. vtun1) when the connection to the OpenVPN server was successful. This can't be always the case due to e.g. software-updates or routing issues to the remote side. This will in the end result in a zombie OpenVPN client interface where some config items might not have been set when the interface finally comes up - imagine a wrong assigned VRF instance. By always creating the OpenVPN interface manuall we ensure that all the CLI settings are properly configured in the OS kernel.
2020-10-18smoketest: openvpn: add initial client testChristian Poessinger
2020-10-18smoketest: sstp: remove unused variableChristian Poessinger
2020-10-17smoketest: add IPv6 option tests to BasicInterfaceTestChristian Poessinger
2020-10-17sysctl-forwarding: T752: Add disable forwarding for ipv4sever-sever
2020-10-13pppoe-server: T2976: fix local-users default value retrieval from XMLChristian Poessinger
We must use XML node style (hyphen over underscore).
2020-10-12smoketest: tftp-server: listen on dummy interface address rather then loopbackChristian Poessinger
2020-10-11smoketest: tftp-server: add initial testcasesChristian Poessinger
2020-10-11smoketest: nat: extend snat and add dnat test casesChristian Poessinger
2020-10-11smoketest: nat: concentrate validation logic checksChristian Poessinger
2020-10-05nat: T2951: use proper comments for source/destination loggingChristian Poessinger
For both source and destination NAT always the LOG name contained DST - which is definately false. This has been corrected to use SRC and DST on the appropriate rules.
2020-10-04smoketest: ntp: T2944: fix "allowed-networks statement" testChristian Poessinger
Remove duplicate localhost listen IP addresses. Commit ca61add5e7 ("ntp: T2944: By default do not listen port 123 on any address") explicitly added listen statements for localhost.
2020-10-04sstp: T2960: migrate to get_config_dict() and reusable templatesChristian Poessinger
2020-10-04pppoe-server: T2953: rename CLI local-ip to gateway-addressChristian Poessinger
Required to get a common CLI for all services provided by Accel-PPP. Once the CLI for each service is consitent - Jinja2 templates can be reused together with get_config_dict().
2020-10-04sstp: T2953: migrate gateway-address, client-ip-settings to common levelChristian Poessinger
* move "network-settings gateway-address" to "gateway-address" * move "network-settings client-ip-settings" to "client-ip-pool"
2020-10-03smoketest: sstp: pppoe: use common RADIUS testsChristian Poessinger
2020-10-03smoketest: sstp: add basic testsChristian Poessinger
2020-10-03smoketest: accel-ppp: prepare common base for multiple accel instance testsChristian Poessinger
2020-10-03pppoe-server: T2956: make use of defaultValue list featureChristian Poessinger
2020-10-01vlan: configdict: T2945: determine if vlan is part of bridgeChristian Poessinger
Every interface knows if it is part of a bridge or not - except a VLAN (VIF) interface. Also VLANs should be aware of its master bridge. Add a testcase to ensure when VIFs on an interface change the bridge does not loos one of it's members.
2020-10-01macsec: T2023: use proper config path for source-interface on removalChristian Poessinger
The config path is altered in get_interface_dict() to the base of the interface in question, e.g. 'interfaces macsec macsec1' - this must be reflected when calling othe methods of Config().
2020-10-01pppoe-server: T2936: move to get_config_dict()Christian Poessinger
For easier configuration read in (CLI) validation and also template rendering it makes sense to drop the old, single implementation and move to the new, generic get_config_dict() approach. Recurring configuration parts like ip-pool, ipv6-pool and nameservers have also been split our into individual templates which will be included through Jinja2 - leading to a single-source of the template sections, too.
2020-09-30wireguard: T2939: bugfix when removing individual peersChristian Poessinger
When individual peers that have been removed got determined they have been added to the config dict as list instead of string - which broke the system plumbing commands as they can not handle a Python list.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 17:48:34 +0000