| Age | Commit message (Collapse) | Author |
|---|
|
T6679: add group option for nat66
|
|
T6693: wireless: Enable WiFi-6 (802.11ax) for 2.4GHz AccessPoints
|
|
|
|
|
|
During podman upgrade and a build from the original source the UNIX socket
definition for systemd got lost in translation.
This commit re-adds the UNIX socket which is started on boot to interact with
Podman.
Example:
curl --unix-socket /run/podman/podman.sock -H 'content-type: application/json' \
-sf http://localhost/containers/json
|
|
|
|
T6647: firewall. Introduce patch for accepting invalid ARP and DHCP
|
|
|
|
stateful bridge firewall. This patch is needed because ARP and DHCP are marked as invalid connections. Also, add ehternet-type matcher in bridge firewall.
|
|
|
|
Fix for system option ssh-client source-interface
For the `verify_source_interface` the key `ifname` if required
|
|
T6183: interfaces openvpn: suppport specifying IP protocol version
|
|
ipoe_server: T6649: Accel-ppp separate vlan-mon from listen interfaces
|
|
|
|
T6636: firewall: fix firewall template in order print logs for default-action
|
|
default-action in order to match same structure as in rules. This way op-mode command for showing firewall log prints logs for default-actions too
|
|
rule
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPENVPN: T6555: add server-bridge options in mode server
|
|
* Only matching flags and fields used by modern RFC2890 "extended GRE" -
this is backwards-compatible, but does not match all possible flags.
* There are no nftables helpers for the GRE key field, which is critical
to match individual tunnel sessions (more detail in the forum post)
* nft expression syntax is not flexible enough for multiple field
matches in a single rule and the key offset changes depending on flags.
* Thus, clumsy compromise in requiring an explicit match on the "checksum"
flag if a key is present, so we know where key will be. In most cases,
nobody uses the checksum, but assuming it to be off or automatically
adding a "not checksum" match unless told otherwise would be confusing
* The automatic "flags key" check when specifying a key doesn't have similar
validation, I added it first and it makes sense. I would still like
to find a workaround to the "checksum" offset problem.
* If we could add 2 rules from 1 config definition, we could match
both cases with appropriate offsets, but this would break existing
FW generation logic, logging, etc.
* Added a "test_gre_match" smoketest
|
|
T4072: firewall extend bridge firewall
|
|
|
|
|
|
prerouting chain; re introduce <set vrf> in policy; change global options for passing traffic to IPvX firewall; update smoketest
|
|
|
|
T5873: ipsec remote access VPN: support VTI interfaces.
|
|
|
|
vrf: T6603: conntrack ct_iface_map must only contain one entry for iifname/oifname
|
|
* PBR can only target table IDs up to 200 and the previous PR to extend the
range was rejected
* PBR with this PR can now also target VRFs directly by name, working around
targeting problems for VRF table IDs outside the overlapping 100-200 range
* Validation ensures rules can't target both a table ID and a VRF name
(internally they are handled the same)
* Added a simple accessor (get_vrf_table_id) for runtime mapping a VRF name
to table ID, based on vyos.ifconfig.interface._set_vrf_ct_zone().
It does not replace that usage, as it deliberately does not handle non-VRF
interface lookups (would fail with a KeyError).
* Added route table ID lookup dict, global route table and VRF table defs
to vyos.defaults. Table ID references have been updated in code touched
by this PR.
* Added a simple smoketest to validate 'set vrf' usage in PBR rules
|
|
T6362: Create conntrack logger daemon
|
|
OpenVPN CLI-option: T6571: rename ncp-ciphers with data-ciphers
|
|
smoketest: T6592: remove unused "import os"
|
|
smoketest: T6614: initial support for op-mode command testing
|
|
smoketest: T5705: use locally connected remote syslog servers
|
|
(#3616)
* Change ipsec match-ipsec/none to match-ipsec-in and match-none-in for
fw rules
* Add ipsec match-ipsec-out and match-none-out
* Change all the points where the match-ipsec.xml.i include was used
before, making sure the new includes (match-ipsec-in/out.xml.i) are
used appropriately. There were a handful of spots where match-ipsec.xml.i
had snuck back in for output hooked chains already
(the common-rule-* includes)
* Add the -out generators to rendered templates
* Heavy modification to firewall config validators:
* I needed to check for ipsec-in matches no matter how deeply nested
under an output-hook chain(via jump-target) - this always generates
an error.
* Ended up retrofitting the jump-targets validator from root chains
and for named custom chains. It checks for recursive loops and improper
IPsec matches.
* Added "test_ipsec_metadata_match" and "test_cyclic_jump_validation"
smoketests
|
|
As there has been no route to the configured syslog servers, smoketests produced:
rsyslogd: omfwd: socket 8: error 101 sending via udp: Network is unreachable
Rather use some fake syslog servers from 127.0.0.0/8 which are directly
connected and we do not need to look up a route, which will suppress the above
error message.
|
|
|
|
|
|
iifname/oifname
When any of the following features NAT, NAT66 or Firewall is enabled, for every
VRF on the CLI we install one rule into nftables for conntrack:
chain vrf_zones_ct_in {
type filter hook prerouting priority raw; policy accept;
counter packets 3113 bytes 32227 ct original zone set iifname map @ct_iface_map
counter packets 8550 bytes 80739 ct original zone set iifname map @ct_iface_map
counter packets 5644 bytes 67697 ct original zone set iifname map @ct_iface_map
}
This is superfluous.
|
|
|
|
|
|
interface: T6592: remove interface from conntrack ct_iface_map on deletion
|
|
deletion
Now that interfaces are deleted from ct_iface_map during deletion it's time to
also add a smoketest ensuring there is no entry in the ct_iface_map once an
interface was deleted from the CLI.
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
|
