summaryrefslogtreecommitdiff
path: root/src/conf_mode/interfaces-bonding.py
AgeCommit message (Collapse)Author
2020-05-28bonding: T2527: delete the last interface from bondGabriel Skupien
2020-05-19dhcpv6-pd: T421: support ethernet based interfacesChristian Poessinger
Add support for prefix delegation when receiving the prefix via ethernet, bridge, bond, wireless.
2020-05-19configdict: T2372: interfaces must reuse interface_default_dataChristian Poessinger
This is to remove the amount of duplicated entries in dictionaries. It's one more part to move to a unified interface management.
2020-05-11bonding: T2449: set accept_ra on bonding interfacesJernej Jakob
2020-05-05bonding: T2427: move VLAN adding to common functionJernej Jakob
2020-05-04bonding: T2367: use simple 'ip addr flush' to flush member addressesJernej Jakob
We've already verified that all member interfaces don't have any addresses configured, so it should be safe to simply call 'ip addr flush' on them to flush the remaining addresses (e.g. IPv6 link-local)
2020-05-04bonding: T2241: fix falling out of bridge when changing settingsJernej Jakob
Previously, set_vrf was always called, which uses the same master and nomaster commands as bridge, so it removed the interface from the bridge. - add checks to make VRF and bridge membership mutually exclusive - always re-add the interface back to any bridge it is part of in case it is deleted and recreated
2020-05-04bonding: T2241: cleanup verify sectionJernej Jakob
- use is_member function instead of checking config directly - make error output more user friendly - replace .format with f-strings - split into lines less than ~80 characters long
2020-05-04bonding: T2241: make address and bridge membership mutually exclusiveJernej Jakob
Bridge members should not have addresses assigned.
2020-05-04bonding: T2241: disallow adding interfaces with addresses to bondJernej Jakob
2020-05-04bonding: T2241: make VRF and bridge membership mutually exclusiveJernej Jakob
2020-05-04validate: T2241: rewrite is_bridge_member to generic is_memberJernej Jakob
- rewrite the function to support both bridge and bonding interface types, if the type is passed it searches only that type, otherwise it searches both - move is_member check out of the deleted condition - move is_member check to intf_from_dict for interfaces that use it
2020-05-04configdict: T2241: get interface name in intf/vlan_from_dictJernej Jakob
This is needed as later functions depend on it
2020-05-02Merge pull request #388 from jjakob/flush-addrs-T2367Christian Poessinger
T2367: flush addresses when adding bond/bridge members
2020-05-02bonding: T2367: flush all addresses of member interfacesJernej Jakob
Any remaining addresses of an interface (e.g. IPv6 link-local) will be flushed when adding a member. A direct call to ip is necessary for interfaces not under the Interface class (e.g. vlan vif*)
2020-05-02bonding: T2372: convert to use new configdict codeThomas Mangin
use intf_to_dict and add_to_dict to correctly implement disable. keeping all interface code with VLAN the same.
2020-04-23interfaces: T2362: add node to delete the default IPv6 link-local addressJernej Jakob
2020-04-23interfaces: T2362: allow setting multiple 'ipv6 address eui64'Jernej Jakob
2020-04-23interfaces: T2362: delete and re-add all EUI64 addresses if MAC has changedJernej Jakob
2020-04-23interfaces: T2362: add default IPv6 link-local address to make IPv6 workJernej Jakob
2020-04-23interfaces: T2362: split set_ipv6_eui64_address into add and del functionsJernej Jakob
2020-04-19bridge: T2232: move helper to vyos.validateChristian Poessinger
2020-04-11dhcp: T2265: refactor DHCP classThomas Mangin
Break the code between v4 and v6, remove need for getter/setter as they are just exposing the underlying dict. Move FixedDict from tunnel code and expose it to other part so it can be used to prevent accidental change to the dhcp option if no default exists already.
2020-04-09util: T2226: os.system was wrongly converted to runThomas Mangin
os.system does print the ouput of the command, run() does not. A new function called call() does the printing and return the error code.
2020-04-07bridge: T2232: prevent deletion of enslaved interfacesChristian Poessinger
Interfaces enslaved to a bridge are not allowed to be deleted. If an interface is deleted from the config but it is still enslaved to a bridge will cause a configuration error on the subsequent boot.
2020-04-06util: T2226: covert most calls from os.system to utilThomas Mangin
As little change a possible but the function call The behaviour should be totally unchanged.
2020-03-28ipv6: T1831: migrate eui64 addressing to XML and pythonChristian Poessinger
2020-03-28ipv6: T1831: migrate autoconf nodeChristian Poessinger
Autoconfigure addresses using Prefix Information in Router Advertisements.
2020-03-28ipv6: T1831: use integers over bool in interface configurationChristian Poessinger
2020-03-28ipv6: T1831: migrate forwarding and dup-addr-detect-transmits nodesChristian Poessinger
... to new XML and Python based frontend/backend.
2020-03-28ifconfig: T2057: explicity name state functionsThomas Mangin
The Interface get_state/set_state were not clear about if they edited the admin or operational state. functions are now using admin_state and oper_state for clarity.
2020-03-23ifconfig: T31: convert all interface to set_vrf apiThomas Mangin
2020-03-08vrf: T31: support VRF usage on VLAN/VIF interfacesChristian Poessinger
2020-03-06vrf: T31: enable vrf support for bonding interfaceChristian Poessinger
2020-03-03interfaces: T1579: fix c/p error when evaluating ↵Christian Poessinger
os.environ['VYOS_TAGNODE_VALUE'] This has been only a theoretical problem but then the error condition was triggered - only an error has been printed instead of raising an Exception.
2020-02-16bond: T2030: fix incorrect delta calculation on member interfacesChristian Poessinger
THe delta check/calculation always returned False on system startup leading to a non functioning bond interface after a reboot as no physical interface actually enslaved. This was fixed by not calculating the current enslaved interfaces from the existing config but rather retrieving the interfaces from sysfs.
2020-02-15bond: T2041: add missing consitency check on member interface existenceChristian Poessinger
2020-01-31bond: T1992: only tear down interface if it's really requiredChristian Poessinger
Without this change the bond interface is always torn down prior changing it's parameters. This will also reset BGP sessions on other VLAN interfaces which is more then bad. This change will only tear down the interface when it is really required, indicated by bond['shutdown_required'], which is required by certain operations as e.g. changing the operating mode.
2020-01-03ifconfig: T1939: provide abstraction for interface "ip" optionChristian Poessinger
Provide an XML/Python abstraction to * ip disable-arp-filter * ip enable-arp-accept * ip enable-arp-announce * ip enable-arp-ignore The old implementation can co-exist until the last interfaces have been migrated.
2020-01-02ifconfig: T1557: refactor apply_vlan_config() functionChristian Poessinger
instead of providing three copies of the same method in bonding, ethernet and wireless, make a common function in vyos.ifconfig_vlan.apply_vlan_config().
2019-10-13Sync XML interface description source file pattern and conf script nameChristian Poessinger
renamed: interface-bonding.py -> interfaces-bonding.py renamed: interface-bridge.py -> interfaces-bridge.py renamed: interface-dummy.py -> interfaces-dummy.py renamed: interface-ethernet.py -> interfaces-ethernet.py renamed: interface-loopback.py -> interfaces-loopback.py renamed: interface-openvpn.py -> interfaces-openvpn.py renamed: interface-vxlan.py -> interfaces-vxlan.py renamed: interface-wireguard.py -> interfaces-wireguard.py
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 19:33:46 +0000